add MQTT publish

[achill-es]

Wouldn't it be a nice improvement to add a function that publishes the channel number where an deauth attack has been identified (LED on) to a pre-configured MQTT broker?

The broker would implicitly record the UTC for the event for later deep analysis.

More ideas on this proposed enhancement welcome...

[vongyver]

It should be possible, in the event of an attack being detected to step out of the main loop, connect to wifi network, then mqtt server and post a record.
Alternatively, if you have a running Node-red instance with a serial interface, you could read from the serial port and post to MQTT within Node-red, which is what I am currently doing. I skipped the timestamp from the esp32 because modding time is a pain.
if (packet_rate>0) {
Serial.print("{Channel:");
Serial.print(channels[ch_index]);
Serial.print(",Packets:");
Serial.print(packet_rate);
Serial.println("}");
}

[chris-nite]

It should be possible, in the event of an attack being detected to step out of the main loop, connect to wifi network, then mqtt server and post a record. Alternatively, if you have a running Node-red instance with a serial interface, you could read from the serial port and post to MQTT within Node-red, which is what I am currently doing. I skipped the timestamp from the esp32 because modding time is a pain. if (packet_rate>0) { Serial.print("{Channel:"); Serial.print(channels[ch_index]); Serial.print(",Packets:"); Serial.print(packet_rate); Serial.println("}"); }

Hi @vongyver , i'm currently trying to implement the deauth detector into my home assistant + node-red build as sensor, so i can properly alert via App, Telegram, Lights, etc.
Would you be kind enough to share your Node-Red-Template for properly splitting up the serial input into a MQTT-Topic?
Thanks in advance and best regards.

[vongyver]

Sadly, I deleted the code for this. If I recall I just was counting the triggers and alerting when it increased within Node-Red. Best of luck with the project! Thank you for the work.

…

On Mon, Jul 3, 2023 at 7:11 AM chris-nite ***@***.***> wrote: It should be possible, in the event of an attack being detected to step out of the main loop, connect to wifi network, then mqtt server and post a record. Alternatively, if you have a running Node-red instance with a serial interface, you could read from the serial port and post to MQTT within Node-red, which is what I am currently doing. I skipped the timestamp from the esp32 because modding time is a pain. if (packet_rate>0) { Serial.print("{Channel:"); Serial.print(channels[ch_index]); Serial.print(",Packets:"); Serial.print(packet_rate); Serial.println("}"); } Hi @vongyver <https://github.com/vongyver> , i'm currently trying to implement the deauth detector into my home assistant + node-red build as sensor, so i can properly alert via App, Telegram, Lights, etc. Would you be kind enough to share your Node-Red-Template for properly splitting up the serial input into a MQTT-Topic? Thanks in advance and best regards. — Reply to this email directly, view it on GitHub <#20 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AASTLSWASEJDZU4MRGUURJLXOLAHLANCNFSM5TSTIJNA> . You are receiving this because you were mentioned.Message ID: ***@***.***>