NodeMCU 1.0 bootlooping problem

[SuchyChomik]

Have you searched for existing (open and closed) issues describing the same problem?

Yes, but there wasn't anyone with the same problem.

Describe the error
The ESP8266 resets every ~8 seconds. I don't know whats causing the problem. Down is the console output (from https://serial.huhn.me/)

 ets Jan  8 2013,rst cause:4, boot mode:(3,4)



wdt reset

load 0x4010f000, len 3584, room 16 

tail 0

chksum 0xb0

csum 0xb0

v2843a5ac

~ld



Mounting SPIFFS...OK

Loading settings...OK

Device names loaded from /names.json

SSIDs loaded from /ssids.json

Scan results saved in /scan.json

Serial interface enabled

Started AP

[WiFi] Path: '/web', Mode: 'AP', SSID: 'pwned', password: 'deauther', channel: '1', hidden: false, captive-portal: false

STARTED! \o/

2.6.1

To Reproduce
Steps to reproduce the behavior:

1. Plug it into your computer
2. Go into the console
3. See error

Expected behavior
Expected it to not bootloop

Environment (please complete the following information):

• OS: Windows 10
• Browser: Chrome
• Hardware: DIY

Attempts
Reflashing the software a couple of times, searching the error.

Additional context
Used the bin file and the https://esp.huhn.me/ website for flashing the esp

[welcome]

Congrats on opening your first issue on this repository! 🎉
This is a automated message to help you avoid common pitfalls when asking for help online.
👉 Be sure to:
* 🇬🇧 Communicate in English so everybody can understand you
* 📖 Have a look at the Wiki and README for information
* 🔍 Search for similar issues (open and closed)
* ✍️ Provide enough information to understand, recreate and help out with your problem
* ℹ️ Let us know if you find a solution and please share it with us
* 📕 Close the issue when your problem has been solved

[yucandu]

The "Display Example I2C" board config is broken. Do not use it. Instead, under the "deauther config" menu, select the default "NodeMCU" at the top, and then in A_config.h, manually copy everything from the "Display Example I2C" section to the top, outside of its "#if defined" group.

[ellensp]

Just struck this issue.

disabling #define DISPLAY_EXAMPLE_I2C
and adding the following directly under #define NODEMCU

#define SSD1306_I2C
#define I2C_ADDR 0x3C
#define I2C_SDA 5
#define I2C_SCL 4

Works fine.

Issue seem to be that LED_NEOPIXEL_GRB is enabled in the DISPLAY_EXAMPLE_I2C and it uses to many resources causing watchdog to reset