Please ONLY list your unit types that work, don't ask for support! Use Chat for that.

[SwiCago]

THIS IS NOT A THREAD TO ASK FOR HELP! USE GITTER CHAT FOR HELP

Hi guys, I would like to use this area to list unit types that are know to work with this library.
Exact number(as in tonnage) not necessary, as all units of the same type would work, if confirmed for one.
Please state Region and models that you have personally tested with. If you can provide weblink of unit that would help. I'll start
North America - MSZ-FH (Wall unit)
North America - SEZ-KD (Horizontal Ducted unit)
Mini split on shared compressor
North America - MXZ-8C48NAHZ (8 zone outdoor unit)

Linked this list to readme, until we have a big enough list. Then I'll create a compatability list.
The following webpage may help find your exact unit type
http://meus1.mylinkdrive.com/index.html

THIS IS NOT A THREAD TO ASK FOR HELP! USE GITTER CHAT FOR HELP

[uronito]

Europe (Spain) - PEAD - RP100 - JA(L) (Horizontal Ducted Unit) ----- Works perfect with last version.

[kayno]

Australia - MSZ-GE80VA2 ("Split system" - Wall unit)
Australia - MUZ-GE80VA2 ("Split system" - Outside unit)

This is one system - unit on the wall, connected to the bigger unit outside.

[lekobob]

North America - MSZ-GL

[schotime]

Australia - MSZ-GE35VAD

[SwiCago]

@kayno @uronito @lekobob @schotime , thank you all for helping contribute to this library. Making it be a works for everyone, is always a group effort. What works just me, may not be ideal for others, so I was quite surprised and humbled to see that this library got traction! And that we have a good group going to make it work for everyone. So again thanks for making this library what it is so far and thanks for posting up supported units.

[kmdm]

Works on MSZ-SF23VE (UK) So I'd venture MSZ-SF*(VE*) at least. given 23 reflects the power of the indoor unit.

Edit: Used an Adafruit HUZZAH esp8266 with no pull-ups to 5v for RX/TX.

[kmdm]

I guess the models listed here are probably compatible too:-

http://innovations.mitsubishi-les.com/en/controls/wifi-adapter

[SwiCago]

@kmdm so you are in the UK? Good to know that the library works for your units as well. I will update the list soon.

[kmdm]

@SwiCago Yep - UK.

[rtwfroody]

Returning this issue more to its intended subject, I can confirm the library works with the unit below:
North America - PVA-A36AA7

I'm still far from finished, but I'm building a stand-alone thermostat and it's at least able to heat to a minimum temperature with this unit.

[Prinsessen]

Mitsubishi MSZ-FD25VA - European/Danish Model

Works perfect :)

[cams-884]

Australia MSZ-GL80VGD

Running on a Wemos D1 Mini (probably a clone). No pullups on rx/tx.

Working well