Gitea 1.25.4-27 fails to start on DS216se (Marvell Armada 370, DSM 7.1.1)

[techniinfolinux]

Is this a new Bug?

• I checked that the bug hasn't been reported before

Package Name

Gitea

Package Version

1.25.4-27

Device Model

Synology DS216se

Device Architecture

ARMv7

Firmware Version

7.1.1-42962 Update 9

What happened?

After updating Gitea from 1.25.0-26 to 1.25.4-27, the package fails to start. The Package Center repair also fails.

Error in /var/log/synopkg.log:

Failed to start package, pkg=[gitea] ... "description":"Failed to run script, script=[start]"

Running the start script manually confirms the issue:

sh -x /var/packages/gitea/scripts/start-stop-status start

The su - command in SERVICE_COMMAND (inside service-setup) fails silently on this architecture under DSM 7.x. The process is never spawned and no PID file is created.

User analysis

Root cause

The su - sc-gitea -s /bin/sh -c '...' syntax with nested single quotes inside SERVICE_COMMAND fails on the Marvell Armada 370 / DSM 7.1.1 combination. The shell splits the quoted string incorrectly and the command is not executed. No error is returned, causing a 20-second timeout before the script exits with code 1.

Workaround

Creating a separate launcher script avoids the quoting issue entirely:

1. Create /var/packages/gitea/scripts/gitea-start.sh:

#!/bin/sh
INSTALL_DIR="/var/packages/gitea/target"
LOG_FILE="/var/packages/gitea/var/gitea.log"
PID_FILE="/var/packages/gitea/var/gitea.pid"
${INSTALL_DIR}/bin/gitea web --config ${INSTALL_DIR}/conf/app.ini >> ${LOG_FILE} 2>&1 &
echo $! > ${PID_FILE}

2. Update SERVICE_COMMAND in /var/packages/gitea/scripts/service-setup:

SERVICE_COMMAND="su sc-gitea -s /bin/sh -c /var/packages/gitea/scripts/gitea-start.sh"

(note: su without the - login flag)

Gitea then starts correctly and listens on port 3000.

⚠️ This workaround must be reapplied after each package update as service-setup is overwritten during upgrade (see install log below).

Notes

• The Gitea binary itself is valid (101 MB, correct ARMv7 architecture)
• The issue exists in the previous version too: the install log shows Package unit is in [failed] status before upgrade — meaning 1.25.0-26 was already broken
• This is likely affecting all ARMv7 NAS models (DS116, DS216se, etc.) running DSM 7.x
• According to install logs, this bug has been present since at least version 1.22.0-14 (September 2024), affecting all subsequent versions (1.22.3-15, 1.22.4-16, 1.23.1-18, 1.23.4-19, 1.25.0-26, 1.25.4-27). The failure is intermittent: the same version can succeed or fail on different boot attempts, suggesting a race condition or timing issue in the su call within start-stop-status.

Reproduction steps

1. Own a Synology DS216se (Marvell Armada 370, DSM 7.1.1-42962 Update 9)
2. Have Gitea 1.25.0-26 installed from SynoCommunity
3. Update Gitea to 1.25.4-27 via Package Center
4. Package Center prompts to repair the package → run repair → fails
5. Connect via SSH and run synopkgctl start gitea → Failed to execute start-stop-status start (err=1)
6. Run sh -x /var/packages/gitea/scripts/start-stop-status start → the su - sc-gitea -s /bin/sh -c '...' command is silently ignored, no PID is created, wait_for_status times out after 20 seconds

Install Log

Log file

2024/09/02 09:01:41 install gitea: begin to start version 1.22.0-14
2024/09/02 09:01:42 install gitea 1.22.0-14 Begin start-stop-status start
2024/09/02 09:01:56 install gitea 1.22.0-14 End start-stop-status start ret=[0]
2024/09/02 09:02:23 install gitea: start version 1.22.0-14 successfully, result 0
2024/09/21 11:33:54 upgrade git: begin to stop packages gitea,git
2024/09/21 11:33:59 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/09/21 11:34:03 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/09/21 11:34:33 upgrade git: begin to start packages git,gitea
2024/09/21 11:34:38 (system) trigger gitea: begin to start version 1.22.0-14
2024/09/21 11:34:40 (system) trigger gitea 1.22.0-14 Begin start-stop-status start
2024/09/21 11:35:03 (system) trigger gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/09/21 11:35:08 (system) trigger gitea: start version 1.22.0-14 failed, result 0
2024/09/21 11:35:15 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/09/21 11:35:15 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/09/22 11:40:57 start gitea: begin to start version 1.22.0-14
2024/09/22 11:40:58 start gitea 1.22.0-14 Begin start-stop-status start
2024/09/22 11:41:11 start gitea 1.22.0-14 End start-stop-status start ret=[0]
2024/09/22 11:41:41 start gitea: start version 1.22.0-14 successfully, result 0
2024/09/30 21:26:07 (system) trigger gitea 1.22.0-14 Begin start-stop-status start
2024/09/30 21:26:34 (system) trigger gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/09/30 21:27:00 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/09/30 21:27:01 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/02 08:15:59 start gitea: begin to start version 1.22.0-14
2024/10/02 08:16:03 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/02 08:16:26 start gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/02 08:16:32 start gitea: start version 1.22.0-14 failed, result 0
2024/10/02 08:16:38 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/02 08:16:38 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/02 08:17:31 start gitea: begin to start version 1.22.0-14
2024/10/02 08:17:32 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/02 08:17:42 start gitea 1.22.0-14 End start-stop-status start ret=[0]
2024/10/02 08:18:27 start gitea: start version 1.22.0-14 successfully, result 0
2024/10/06 09:48:28 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/06 09:48:38 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/06 09:50:32 (system) trigger gitea 1.22.0-14 Begin start-stop-status start
2024/10/06 09:51:08 (system) trigger gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/06 09:51:39 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/06 09:51:40 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/07 10:13:42 start gitea: begin to start version 1.22.0-14
2024/10/07 10:13:47 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/07 10:14:09 start gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/07 10:14:14 start gitea: start version 1.22.0-14 failed, result 0
2024/10/07 10:14:17 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/07 10:14:17 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/07 10:14:41 start gitea: begin to start version 1.22.0-14
2024/10/07 10:14:43 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/07 10:15:06 start gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/07 10:15:10 start gitea: start version 1.22.0-14 failed, result 0
2024/10/07 10:15:15 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/07 10:15:15 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/07 10:22:43 start gitea: begin to start version 1.22.0-14
2024/10/07 10:22:50 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/07 10:23:13 start gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/07 10:23:26 start gitea: start version 1.22.0-14 failed, result 0
2024/10/07 10:23:39 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/07 10:23:40 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/07 11:24:14 (system) trigger gitea 1.22.0-14 Begin start-stop-status start
2024/10/07 11:24:42 (system) trigger gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/07 11:25:07 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/07 11:25:07 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/07 22:21:45 start gitea: begin to start version 1.22.0-14
2024/10/07 22:21:50 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/07 22:22:15 start gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/07 22:22:19 start gitea: start version 1.22.0-14 failed, result 0
2024/10/07 22:22:26 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/07 22:22:27 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/07 22:23:29 start gitea: begin to start version 1.22.0-14
2024/10/07 22:23:32 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/07 22:23:56 start gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/07 22:24:00 start gitea: start version 1.22.0-14 failed, result 0
2024/10/07 22:24:05 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/07 22:24:05 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/07 22:34:55 start gitea: begin to start version 1.22.0-14
2024/10/07 22:34:56 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/07 22:35:18 start gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/07 22:35:23 start gitea: start version 1.22.0-14 failed, result 0
2024/10/07 22:35:26 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/07 22:35:26 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/19 10:06:20 start gitea: begin to start version 1.22.0-14
2024/10/19 10:06:24 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/19 10:06:48 start gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/19 10:06:54 start gitea: start version 1.22.0-14 failed, result 0
2024/10/19 10:06:58 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/19 10:06:59 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/23 15:57:35 (system) trigger gitea 1.22.0-14 Begin start-stop-status start
2024/10/23 15:58:05 (system) trigger gitea 1.22.0-14 End start-stop-status start ret=[1]
2024/10/23 15:59:20 (system) trigger gitea 1.22.0-14 Begin start-stop-status stop
2024/10/23 15:59:21 (system) trigger gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/25 09:26:19 start gitea: begin to start version 1.22.0-14
2024/10/25 09:26:20 start gitea 1.22.0-14 Begin start-stop-status start
2024/10/25 09:26:39 start gitea 1.22.0-14 End start-stop-status start ret=[0]
2024/10/25 09:27:07 start gitea: start version 1.22.0-14 successfully, result 0
2024/10/25 09:36:46 Package unit is in [active] status before upgrade, pkg=[gitea]
2024/10/25 09:36:48 upgrade gitea: begin to stop version 1.22.0-14
2024/10/25 09:36:50 upgrade gitea 1.22.0-14 Begin start-stop-status stop
2024/10/25 09:36:56 upgrade gitea 1.22.0-14 End start-stop-status stop ret=[0]
2024/10/25 09:36:57 upgrade gitea: stop version 1.22.0-14 successfully, result 0
2024/10/25 09:36:57 upgrade gitea 1.22.0-14 Begin preupgrade
2024/10/25 09:36:58 upgrade gitea 1.22.0-14 End preupgrade ret=[0]
2024/10/25 09:36:58 upgrade gitea 1.22.0-14 Begin preuninst
2024/10/25 09:36:58 upgrade gitea 1.22.0-14 End preuninst ret=[0]
2024/10/25 09:36:59 upgrade gitea 1.22.0-14 Begin /bin/rm -rf /volume1/@appstore/gitea
2024/10/25 09:36:59 upgrade gitea 1.22.0-14 End /bin/rm -rf /volume1/@appstore/gitea ret=[0]
2024/10/25 09:36:59 upgrade gitea 1.22.0-14 Begin /bin/rm -rf /volume1/@apptemp/gitea
2024/10/25 09:36:59 upgrade gitea 1.22.0-14 End /bin/rm -rf /volume1/@apptemp/gitea ret=[0]
2024/10/25 09:37:00 upgrade gitea 1.22.0-14 Begin postuninst
2024/10/25 09:37:00 upgrade gitea 1.22.0-14 End postuninst ret=[0]
2024/10/25 09:37:01 upgrade gitea: Uninstall 1.22.0-14 successfully
2024/10/25 09:37:01 upgrade gitea 1.22.3-15 Begin preinst
2024/10/25 09:37:01 upgrade gitea 1.22.3-15 End preinst ret=[0]
2024/10/25 09:37:01 upgrade gitea 1.22.3-15 Begin /bin/mkdir -p /volume1/@appstore/gitea -m 755
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/mkdir -p /volume1/@appstore/gitea -m 755 ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/rm -rf /volume1/@appstore/gitea
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/rm -rf /volume1/@appstore/gitea ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/package /volume1/@appstore/gitea
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/package /volume1/@appstore/gitea ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/rm -rf /var/packages/gitea
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/rm -rf /var/packages/gitea ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/mkdir -p /var/packages/gitea -m 755
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/mkdir -p /var/packages/gitea -m 755 ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/touch /var/packages/gitea/installing
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/touch /var/packages/gitea/installing ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/INFO /var/packages/gitea/INFO
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/INFO /var/packages/gitea/INFO ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/rm -rf /var/packages/gitea/scripts
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/rm -rf /var/packages/gitea/scripts ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/scripts /var/packages/gitea/scripts
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/scripts /var/packages/gitea/scripts ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/rm -rf /var/packages/gitea/WIZARD_UIFILES
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/rm -rf /var/packages/gitea/WIZARD_UIFILES ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/WIZARD_UIFILES /var/packages/gitea/WIZARD_UIFILES
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/WIZARD_UIFILES /var/packages/gitea/WIZARD_UIFILES ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/rm -rf /var/packages/gitea/conf
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/rm -rf /var/packages/gitea/conf ret=[0]
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 Begin /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/conf /var/packages/gitea/conf
2024/10/25 09:37:02 upgrade gitea 1.22.3-15 End /bin/mv -f /volume1/@tmp/synopkg/install.8Cnkkz/conf /var/packages/gitea/conf ret=[0]
2024/10/25 09:37:26 upgrade gitea 1.22.3-15 Begin postinst
2024/10/25 09:37:27 upgrade gitea 1.22.3-15 End postinst ret=[0]
2024/10/25 09:37:27 upgrade gitea 1.22.3-15 Begin postupgrade
2024/10/25 09:37:27 upgrade gitea 1.22.3-15 End postupgrade ret=[0]
2024/10/25 09:37:28 upgrade gitea: begin to start version 1.22.3-15
2024/10/25 09:37:29 upgrade gitea 1.22.3-15 Begin start-stop-status start
2024/10/25 09:37:51 upgrade gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/10/25 09:37:53 upgrade gitea: start version 1.22.3-15 failed, result 0
2024/10/25 09:37:54 upgrade gitea from 1.22.0-14 to 1.22.3-15 successfully
2024/10/25 09:38:03 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/10/25 09:38:03 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/10/25 09:38:57 start gitea: begin to start version 1.22.3-15
2024/10/25 09:38:59 start gitea 1.22.3-15 Begin start-stop-status start
2024/10/25 09:39:22 start gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/10/25 09:39:26 start gitea: start version 1.22.3-15 failed, result 0
2024/10/25 09:39:31 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/10/25 09:39:31 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/10/25 09:44:06 start gitea: begin to start version 1.22.3-15
2024/10/25 09:44:23 start gitea 1.22.3-15 Begin start-stop-status start
2024/10/25 09:44:47 start gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/10/25 09:44:52 start gitea: start version 1.22.3-15 failed, result 0
2024/10/25 09:44:54 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/10/25 09:44:55 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/03 10:52:23 start gitea: begin to start version 1.22.3-15
2024/11/03 10:52:25 start gitea 1.22.3-15 Begin start-stop-status start
2024/11/03 10:52:48 start gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/03 10:52:53 start gitea: start version 1.22.3-15 failed, result 0
2024/11/03 10:52:59 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/03 10:52:59 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/03 11:14:04 start gitea: begin to start version 1.22.3-15
2024/11/03 11:14:05 start gitea 1.22.3-15 Begin start-stop-status start
2024/11/03 11:14:27 start gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/03 11:14:32 start gitea: start version 1.22.3-15 failed, result 0
2024/11/03 11:14:34 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/03 11:14:34 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/11 12:24:59 start gitea: begin to start version 1.22.3-15
2024/11/11 12:25:01 start gitea 1.22.3-15 Begin start-stop-status start
2024/11/11 12:25:24 start gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/11 12:25:29 start gitea: start version 1.22.3-15 failed, result 0
2024/11/11 12:25:33 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/11 12:25:33 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/12 09:56:47 start gitea: begin to start version 1.22.3-15
2024/11/12 09:56:47 start gitea 1.22.3-15 Begin start-stop-status start
2024/11/12 09:57:10 start gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/12 09:57:14 start gitea: start version 1.22.3-15 failed, result 0
2024/11/12 09:57:17 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/12 09:57:17 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/12 10:00:14 start gitea: begin to start version 1.22.3-15
2024/11/12 10:00:15 start gitea 1.22.3-15 Begin start-stop-status start
2024/11/12 10:00:28 start gitea 1.22.3-15 End start-stop-status start ret=[0]
2024/11/12 10:01:09 start gitea: start version 1.22.3-15 successfully, result 0
2024/11/28 08:06:04 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/28 08:06:17 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/28 08:06:27 (system) trigger gitea 1.22.3-15 Begin start-stop-status start
2024/11/28 08:06:57 (system) trigger gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/28 08:07:27 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/28 08:07:28 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/28 08:17:51 start gitea: begin to start version 1.22.3-15
2024/11/28 08:18:52 start gitea 1.22.3-15 Begin start-stop-status start
2024/11/28 08:19:18 start gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/28 08:19:22 start gitea: start version 1.22.3-15 failed, result 0
2024/11/28 08:19:36 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/28 08:19:37 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/28 08:22:47 start gitea: begin to start version 1.22.3-15
2024/11/28 08:22:56 start gitea 1.22.3-15 Begin start-stop-status start
2024/11/28 08:23:30 start gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/28 08:23:41 start gitea: start version 1.22.3-15 failed, result 0
2024/11/28 08:24:00 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/28 08:24:02 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/28 08:28:08 start gitea: begin to start version 1.22.3-15
2024/11/28 08:28:16 start gitea 1.22.3-15 Begin start-stop-status start
2024/11/28 08:28:48 start gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/28 08:29:32 start gitea: start version 1.22.3-15 failed, result 0
2024/11/28 08:30:26 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/28 08:30:27 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/29 07:43:28 (system) trigger gitea 1.22.3-15 Begin start-stop-status start
2024/11/29 07:43:56 (system) trigger gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/29 07:44:36 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/29 07:44:37 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/11/29 09:17:03 (system) trigger gitea 1.22.3-15 Begin start-stop-status start
2024/11/29 09:17:32 (system) trigger gitea 1.22.3-15 End start-stop-status start ret=[1]
2024/11/29 09:17:59 (system) trigger gitea 1.22.3-15 Begin start-stop-status stop
2024/11/29 09:17:59 (system) trigger gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/12/05 08:10:05 start gitea: begin to start version 1.22.3-15
2024/12/05 08:10:06 start gitea 1.22.3-15 Begin start-stop-status start
2024/12/05 08:10:24 start gitea 1.22.3-15 End start-stop-status start ret=[0]
2024/12/05 08:10:51 start gitea: start version 1.22.3-15 successfully, result 0
2024/12/05 08:15:19 Package unit is in [active] status before upgrade, pkg=[gitea]
2024/12/05 08:15:20 upgrade gitea: begin to stop version 1.22.3-15
2024/12/05 08:15:24 upgrade gitea 1.22.3-15 Begin start-stop-status stop
2024/12/05 08:15:28 upgrade gitea 1.22.3-15 End start-stop-status stop ret=[0]
2024/12/05 08:15:30 upgrade gitea: stop version 1.22.3-15 successfully, result 0
2024/12/05 08:15:30 upgrade gitea 1.22.3-15 Begin preupgrade
2024/12/05 08:15:31 upgrade gitea 1.22.3-15 End preupgrade ret=[0]
2024/12/05 08:15:31 upgrade gitea 1.22.3-15 Begin preuninst
2024/12/05 08:15:32 upgrade gitea 1.22.3-15 End preuninst ret=[0]
2024/12/05 08:15:32 upgrade gitea 1.22.3-15 Begin /bin/rm -rf /volume1/@appstore/gitea
2024/12/05 08:15:33 upgrade gitea 1.22.3-15 End /bin/rm -rf /volume1/@appstore/gitea ret=[0]
2024/12/05 08:15:33 upgrade gitea 1.22.3-15 Begin /bin/rm -rf /volume1/@apptemp/gitea
2024/12/05 08:15:33 upgrade gitea 1.22.3-15 End /bin/rm -rf /volume1/@apptemp/gitea ret=[0]
2024/12/05 08:15:34 upgrade gitea 1.22.3-15 Begin postuninst
2024/12/05 08:15:35 upgrade gitea 1.22.3-15 End postuninst ret=[0]
2024/12/05 08:15:35 upgrade gitea: Uninstall 1.22.3-15 successfully
2024/12/05 08:15:35 upgrade gitea 1.22.4-16 Begin preinst
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 End preinst ret=[0]
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 Begin /bin/mkdir -p /volume1/@appstore/gitea -m 755
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 End /bin/mkdir -p /volume1/@appstore/gitea -m 755 ret=[0]
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 Begin /bin/rm -rf /volume1/@appstore/gitea
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 End /bin/rm -rf /volume1/@appstore/gitea ret=[0]
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 Begin /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/package /volume1/@appstore/gitea
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 End /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/package /volume1/@appstore/gitea ret=[0]
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 Begin /bin/rm -rf /var/packages/gitea
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 End /bin/rm -rf /var/packages/gitea ret=[0]
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 Begin /bin/mkdir -p /var/packages/gitea -m 755
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 End /bin/mkdir -p /var/packages/gitea -m 755 ret=[0]
2024/12/05 08:15:36 upgrade gitea 1.22.4-16 Begin /bin/touch /var/packages/gitea/installing
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 End /bin/touch /var/packages/gitea/installing ret=[0]
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 Begin /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/INFO /var/packages/gitea/INFO
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 End /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/INFO /var/packages/gitea/INFO ret=[0]
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 Begin /bin/rm -rf /var/packages/gitea/scripts
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 End /bin/rm -rf /var/packages/gitea/scripts ret=[0]
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 Begin /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/scripts /var/packages/gitea/scripts
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 End /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/scripts /var/packages/gitea/scripts ret=[0]
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 Begin /bin/rm -rf /var/packages/gitea/WIZARD_UIFILES
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 End /bin/rm -rf /var/packages/gitea/WIZARD_UIFILES ret=[0]
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 Begin /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/WIZARD_UIFILES /var/packages/gitea/WIZARD_UIFILES
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 End /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/WIZARD_UIFILES /var/packages/gitea/WIZARD_UIFILES ret=[0]
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 Begin /bin/rm -rf /var/packages/gitea/conf
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 End /bin/rm -rf /var/packages/gitea/conf ret=[0]
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 Begin /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/conf /var/packages/gitea/conf
2024/12/05 08:15:37 upgrade gitea 1.22.4-16 End /bin/mv -f /volume1/@tmp/synopkg/install.A8MmDg/conf /var/packages/gitea/conf ret=[0]
2024/12/05 08:16:04 upgrade gitea 1.22.4-16 Begin postinst
2024/12/05 08:16:06 upgrade gitea 1.22.4-16 End postinst ret=[0]
2024/12/05 08:16:06 upgrade gitea 1.22.4-16 Begin postupgrade
2024/12/05 08:16:07 upgrade gitea 1.22.4-16 End postupgrade ret=[0]
2024/12/05 08:16:07 upgrade gitea: begin to start version 1.22.4-16
2024/12/05 08:16:09 upgrade gitea 1.22.4-16 Begin start-stop-status start
2024/12/05 08:16:31 upgrade gitea 1.22.4-16 End start-stop-status start ret=[1]
2024/12/05 08:16:36 upgrade gitea: start version 1.22.4-16 failed, result 0
2024/12/05 08:16:37 upgrade gitea from 1.22.3-15 to 1.22.4-16 successfully
2024/12/05 08:16:53 (system) trigger gitea 1.22.4-16 Begin start-stop-status stop
2024/12/05 08:16:53 (system) trigger gitea 1.22.4-16 End start-stop-status stop ret=[0]
2024/12/05 08:18:13 start gitea: begin to start version 1.22.4-16
2024/12/05 08:18:15 start gitea 1.22.4-16 Begin start-stop-status start
2024/12/05 08:18:32 start gitea 1.22.4-16 End start-stop-status start ret=[0]
2024/12/05 08:19:04 start gitea: start version 1.22.4-16 successfully, result 0
2025/02/14 18:52:19 (system) trigger gitea 1.22.4-16 Begin start-stop-status stop
2025/02/14 18:52:52 (system) trigger gitea 1.22.4-16 End start-stop-status stop ret=[0]
2025/02/14 19:00:38 (system) trigger gitea 1.22.4-16 Begin start-stop-status start
2025/02/14 19:01:07 (system) trigger gitea 1.22.4-16 End start-stop-status start ret=[1]
2025/02/14 19:02:11 (system) trigger gitea 1.22.4-16 Begin start-stop-status stop
2025/02/14 19:02:11 (system) trigger gitea 1.22.4-16 End start-stop-status stop ret=[0]
2025/02/15 00:48:43 start gitea 1.22.4-16 End start-stop-status start ret=[1]
2025/02/15 00:48:47 start gitea: start version 1.22.4-16 failed, result 0
2025/02/15 01:17:29 Package unit is in [failed] status before upgrade, pkg=[gitea]
2025/02/15 01:18:03 upgrade gitea: stop version 1.22.4-16 failed, result 0
2025/02/15 01:21:37 upgrade gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/15 01:21:47 upgrade gitea: start version 1.23.1-18 failed, result 0
2025/02/15 01:21:51 upgrade gitea from 1.22.4-16 to 1.23.1-18 successfully
2025/02/15 01:48:28 start gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/15 02:15:07 Package unit is in [failed] status before upgrade, pkg=[gitea]
2025/02/15 02:15:08 upgrade gitea: begin to stop version 1.23.1-18
2025/02/15 02:15:10 upgrade gitea: stop version 1.23.1-18 failed, result 0
2025/02/15 02:15:11 upgrade gitea 1.23.1-18 Begin preupgrade
2025/02/15 02:19:10 upgrade gitea: begin to start version 1.23.1-18
2025/02/15 02:19:10 upgrade gitea: start version 1.23.1-18 failed, result 0
2025/02/15 11:09:39 upgrade gitea 1.23.1-18 Begin postuninst
2025/02/15 11:09:41 upgrade gitea 1.23.1-18 End postuninst ret=[0]
2025/02/15 11:12:55 upgrade gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/15 11:13:01 upgrade gitea: start version 1.23.1-18 failed, result 0
2025/02/15 11:13:06 upgrade gitea from 1.23.1-18 to 1.23.1-18 successfully
2025/02/15 13:32:37 start gitea 1.23.1-18 Begin start-stop-status start
2025/02/15 13:33:09 start gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/15 20:04:36 (system) trigger gitea 1.23.1-18 Begin start-stop-status start
2025/02/15 20:05:04 (system) trigger gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/15 20:05:38 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/15 20:05:40 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/15 21:19:08 start gitea: begin to start version 1.23.1-18
2025/02/15 21:19:09 start gitea 1.23.1-18 Begin start-stop-status start
2025/02/15 21:19:31 start gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/15 21:19:36 start gitea: start version 1.23.1-18 failed, result 0
2025/02/15 21:19:39 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/15 21:19:39 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/15 21:26:27 (system) trigger gitea 1.23.1-18 Begin start-stop-status start
2025/02/15 21:26:55 (system) trigger gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/15 21:27:18 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/15 21:27:19 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/16 20:04:06 (system) trigger gitea 1.23.1-18 Begin start-stop-status start
2025/02/16 20:04:36 (system) trigger gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/16 20:05:04 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/16 20:05:05 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/17 00:29:14 start gitea: begin to start version 1.23.1-18
2025/02/17 00:29:15 start gitea 1.23.1-18 Begin start-stop-status start
2025/02/17 00:29:27 start gitea 1.23.1-18 End start-stop-status start ret=[0]
2025/02/17 00:29:51 start gitea: start version 1.23.1-18 successfully, result 0
2025/02/17 13:30:23 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/17 13:30:32 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/17 20:04:17 (system) trigger gitea 1.23.1-18 Begin start-stop-status start
2025/02/17 20:04:45 (system) trigger gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/17 20:05:10 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/17 20:05:11 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/18 20:04:13 (system) trigger gitea 1.23.1-18 Begin start-stop-status start
2025/02/18 20:04:41 (system) trigger gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/18 20:05:10 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/18 20:05:11 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/19 04:55:56 start gitea: begin to start version 1.23.1-18
2025/02/19 04:55:57 start gitea 1.23.1-18 Begin start-stop-status start
2025/02/19 04:56:17 start gitea 1.23.1-18 End start-stop-status start ret=[0]
2025/02/19 04:56:37 start gitea: start version 1.23.1-18 successfully, result 0
2025/02/19 13:32:25 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/19 13:32:44 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/19 20:05:12 (system) trigger gitea 1.23.1-18 Begin start-stop-status start
2025/02/19 20:05:47 (system) trigger gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/19 20:06:36 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/19 20:06:38 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/19 21:17:35 start gitea: begin to start version 1.23.1-18
2025/02/19 21:17:47 start gitea 1.23.1-18 Begin start-stop-status start
2025/02/19 21:18:14 start gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/19 21:18:27 start gitea: start version 1.23.1-18 failed, result 0
2025/02/19 21:18:40 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/19 21:18:41 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/22 16:46:18 start gitea: begin to start version 1.23.1-18
2025/02/22 16:46:19 start gitea 1.23.1-18 Begin start-stop-status start
2025/02/22 16:46:32 start gitea 1.23.1-18 End start-stop-status start ret=[0]
2025/02/22 16:46:53 start gitea: start version 1.23.1-18 successfully, result 0
2025/02/25 03:31:52 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/25 03:32:22 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/25 03:38:45 (system) trigger gitea 1.23.1-18 Begin start-stop-status start
2025/02/25 03:39:13 (system) trigger gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/25 03:39:45 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/25 03:39:46 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/25 12:07:35 start gitea: begin to start version 1.23.1-18
2025/02/25 12:07:36 start gitea 1.23.1-18 Begin start-stop-status start
2025/02/25 12:07:59 start gitea 1.23.1-18 End start-stop-status start ret=[1]
2025/02/25 12:08:03 start gitea: start version 1.23.1-18 failed, result 0
2025/02/25 12:08:09 (system) trigger gitea 1.23.1-18 Begin start-stop-status stop
2025/02/25 12:08:09 (system) trigger gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/25 12:11:08 start gitea: begin to start version 1.23.1-18
2025/02/25 12:11:09 start gitea 1.23.1-18 Begin start-stop-status start
2025/02/25 12:11:24 start gitea 1.23.1-18 End start-stop-status start ret=[0]
2025/02/25 12:11:47 start gitea: start version 1.23.1-18 successfully, result 0
2025/02/25 12:18:55 Package unit is in [active] status before upgrade, pkg=[gitea]
2025/02/25 12:18:57 upgrade gitea: begin to stop version 1.23.1-18
2025/02/25 12:19:01 upgrade gitea 1.23.1-18 Begin start-stop-status stop
2025/02/25 12:19:04 upgrade gitea 1.23.1-18 End start-stop-status stop ret=[0]
2025/02/25 12:19:06 upgrade gitea: stop version 1.23.1-18 successfully, result 0
2025/02/25 12:19:06 upgrade gitea 1.23.1-18 Begin preupgrade
2025/02/25 12:19:07 upgrade gitea 1.23.1-18 End preupgrade ret=[0]
2025/02/25 12:19:07 upgrade gitea 1.23.1-18 Begin preuninst
2025/02/25 12:19:08 upgrade gitea 1.23.1-18 End preuninst ret=[0]
2025/02/25 12:19:09 upgrade gitea 1.23.1-18 Begin /bin/rm -rf /volume1/@appstore/gitea
2025/02/25 12:19:09 upgrade gitea 1.23.1-18 End /bin/rm -rf /volume1/@appstore/gitea ret=[0]
2025/02/25 12:19:09 upgrade gitea 1.23.1-18 Begin /bin/rm -rf /volume1/@apptemp/gitea
2025/02/25 12:19:09 upgrade gitea 1.23.1-18 End /bin/rm -rf /volume1/@apptemp/gitea ret=[0]
2025/02/25 12:19:09 upgrade gitea 1.23.1-18 Begin postuninst
2025/02/25 12:19:10 upgrade gitea 1.23.1-18 End postuninst ret=[0]
2025/02/25 12:19:10 upgrade gitea: Uninstall 1.23.1-18 successfully
2025/02/25 12:19:10 upgrade gitea 1.23.4-19 Begin preinst
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 End preinst ret=[0]
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 Begin /bin/mkdir -p /volume1/@appstore/gitea -m 755
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 End /bin/mkdir -p /volume1/@appstore/gitea -m 755 ret=[0]
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 Begin /bin/rm -rf /volume1/@appstore/gitea
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 End /bin/rm -rf /volume1/@appstore/gitea ret=[0]
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 Begin /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/package /volume1/@appstore/gitea
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 End /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/package /volume1/@appstore/gitea ret=[0]
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 Begin /bin/rm -rf /var/packages/gitea
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 End /bin/rm -rf /var/packages/gitea ret=[0]
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 Begin /bin/mkdir -p /var/packages/gitea -m 755
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 End /bin/mkdir -p /var/packages/gitea -m 755 ret=[0]
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 Begin /bin/touch /var/packages/gitea/installing
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 End /bin/touch /var/packages/gitea/installing ret=[0]
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 Begin /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/INFO /var/packages/gitea/INFO
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 End /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/INFO /var/packages/gitea/INFO ret=[0]
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 Begin /bin/rm -rf /var/packages/gitea/scripts
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 End /bin/rm -rf /var/packages/gitea/scripts ret=[0]
2025/02/25 12:19:11 upgrade gitea 1.23.4-19 Begin /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/scripts /var/packages/gitea/scripts
2025/02/25 12:19:12 upgrade gitea 1.23.4-19 End /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/scripts /var/packages/gitea/scripts ret=[0]
2025/02/25 12:19:12 upgrade gitea 1.23.4-19 Begin /bin/rm -rf /var/packages/gitea/WIZARD_UIFILES
2025/02/25 12:19:12 upgrade gitea 1.23.4-19 End /bin/rm -rf /var/packages/gitea/WIZARD_UIFILES ret=[0]
2025/02/25 12:19:12 upgrade gitea 1.23.4-19 Begin /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/WIZARD_UIFILES /var/packages/gitea/WIZARD_UIFILES
2025/02/25 12:19:12 upgrade gitea 1.23.4-19 End /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/WIZARD_UIFILES /var/packages/gitea/WIZARD_UIFILES ret=[0]
2025/02/25 12:19:12 upgrade gitea 1.23.4-19 Begin /bin/rm -rf /var/packages/gitea/conf
2025/02/25 12:19:12 upgrade gitea 1.23.4-19 End /bin/rm -rf /var/packages/gitea/conf ret=[0]
2025/02/25 12:19:12 upgrade gitea 1.23.4-19 Begin /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/conf /var/packages/gitea/conf
2025/02/25 12:19:12 upgrade gitea 1.23.4-19 End /bin/mv -f /volume1/@tmp/synopkg/install.WPdMYS/conf /var/packages/gitea/conf ret=[0]
2025/02/25 12:19:37 upgrade gitea 1.23.4-19 Begin postinst
2025/02/25 12:19:38 upgrade gitea 1.23.4-19 End postinst ret=[0]
2025/02/25 12:19:38 upgrade gitea 1.23.4-19 Begin postupgrade
2025/02/25 12:19:39 upgrade gitea 1.23.4-19 End postupgrade ret=[0]
2025/02/25 12:19:39 upgrade gitea: begin to start version 1.23.4-19
2025/02/25 12:19:41 upgrade gitea 1.23.4-19 Begin start-stop-status start
2025/02/25 12:19:56 upgrade gitea 1.23.4-19 End start-stop-status start ret=[0]
2025/02/25 12:19:58 upgrade gitea: start version 1.23.4-19 successfully, result 0
2025/02/25 12:19:59 upgrade gitea from 1.23.1-18 to 1.23.4-19 successfully
2025/03/22 12:45:09 (system) trigger gitea 1.23.4-19 Begin start-stop-status start
2025/03/22 12:45:39 (system) trigger gitea 1.23.4-19 End start-stop-status start ret=[1]
2025/03/22 12:46:09 (system) trigger gitea 1.23.4-19 Begin start-stop-status stop
2025/03/22 12:46:10 (system) trigger gitea 1.23.4-19 End start-stop-status stop ret=[0]
2025/03/22 13:27:56 (system) trigger gitea 1.23.4-19 Begin start-stop-status start
2025/03/22 13:28:24 (system) trigger gitea 1.23.4-19 End start-stop-status start ret=[1]
2025/03/22 13:28:43 (system) trigger gitea 1.23.4-19 Begin start-stop-status stop
2025/03/22 13:28:44 (system) trigger gitea 1.23.4-19 End start-stop-status stop ret=[0]

Service Log

Mon Mar  2 15:02:49 CET 2026
Begin service_prestart
End service_prestart
Starting gitea command su sc-gitea -s /bin/sh -c /var/packages/gitea/scripts/gitea-start.sh
Password: su: Permission denied

Other Logs

Log file

2026/02/28 22:21:48 Use original volume to install, volume=[/volume1/@appstore/gitea]
2026/02/28 22:22:48 Use original volume to install, volume=[/volume1/@appstore/gitea]
2026/02/28 22:24:59 Use original volume to install, volume=[/volume1/@appstore/gitea]
2026/02/28 22:25:11 Systemd enable status: 1, pkg=[gitea]
2026/02/28 22:25:11 Package unit is in [failed] status before upgrade, pkg=[gitea]
2026/02/28 22:25:12 upgrade gitea: begin to stop version 1.25.0-26
2026/02/28 22:25:13 upgrade gitea: stop version 1.25.0-26 failed, result 0
2026/02/28 22:25:13 upgrade gitea 1.25.0-26 Begin preupgrade
2026/02/28 22:25:15 upgrade gitea 1.25.0-26 End preupgrade ret=[0]
2026/02/28 22:25:15 upgrade gitea 1.25.0-26 Begin preuninst
2026/02/28 22:25:17 upgrade gitea 1.25.0-26 End preuninst ret=[0]
2026/02/28 22:25:17 Release port-config for gitea when 0x0002 (ready)
2026/02/28 22:25:17 Release port-config for gitea when 0x0002 (done)
2026/02/28 22:25:18 Release systemd-unit for gitea when 0x0002 (ready)
2026/02/28 22:25:18 Release systemd-unit for gitea when 0x0002 (done)
2026/02/28 22:25:19 upgrade gitea 1.25.0-26 Begin /bin/rm -rf /volume1/@appstore/gitea
2026/02/28 22:25:19 upgrade gitea 1.25.0-26 End /bin/rm -rf /volume1/@appstore/gitea ret=[0]
2026/02/28 22:25:19 upgrade gitea 1.25.0-26 Begin /bin/rm -rf /volume1/@apptemp/gitea
2026/02/28 22:25:19 upgrade gitea 1.25.0-26 End /bin/rm -rf /volume1/@apptemp/gitea ret=[0]
2026/02/28 22:25:20 Release port-config for gitea when 0x0002 (ready)
2026/02/28 22:25:20 Release port-config for gitea when 0x0002 (done)
2026/02/28 22:25:20 Release data-share for gitea when 0x0002 (ready)
2026/02/28 22:25:20 Release data-share for gitea when 0x0002 (done)
2026/02/28 22:25:20 Release data-share for gitea when 0x0002 (ready)
2026/02/28 22:25:20 Release data-share for gitea when 0x0002 (done)
2026/02/28 22:25:20 Release data-share for gitea when 0x0002 (ready)
2026/02/28 22:25:20 Release data-share for gitea when 0x0002 (done)
2026/02/28 22:25:20 upgrade gitea 1.25.0-26 Begin postuninst
2026/02/28 22:25:22 upgrade gitea 1.25.0-26 End postuninst ret=[0]
2026/02/28 22:25:23 upgrade gitea: Uninstall 1.25.0-26 successfully
2026/02/28 22:25:24 Acquire data-share for gitea when 0x0002 (ready)
2026/02/28 22:25:24 Acquire data-share for gitea when 0x0002 (done)
2026/02/28 22:25:24 upgrade gitea 1.25.4-27 Begin preinst
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 End preinst ret=[0]
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 Begin /bin/mkdir -p /volume1/@appstore/gitea -m 755
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 End /bin/mkdir -p /volume1/@appstore/gitea -m 755 ret=[0]
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 Begin /bin/rm -rf /volume1/@appstore/gitea
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 End /bin/rm -rf /volume1/@appstore/gitea ret=[0]
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 Begin /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/package /volume1/@appstore/gitea
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 End /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/package /volume1/@appstore/gitea ret=[0]
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 Begin /bin/rm -rf /var/packages/gitea
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 End /bin/rm -rf /var/packages/gitea ret=[0]
2026/02/28 22:25:25 upgrade gitea 1.25.4-27 Begin /bin/mkdir -p /var/packages/gitea -m 755
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 End /bin/mkdir -p /var/packages/gitea -m 755 ret=[0]
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 Begin /bin/touch /var/packages/gitea/installing
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 End /bin/touch /var/packages/gitea/installing ret=[0]
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 Begin /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/INFO /var/packages/gitea/INFO
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 End /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/INFO /var/packages/gitea/INFO ret=[0]
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 Begin /bin/rm -rf /var/packages/gitea/scripts
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 End /bin/rm -rf /var/packages/gitea/scripts ret=[0]
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 Begin /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/scripts /var/packages/gitea/scripts
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 End /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/scripts /var/packages/gitea/scripts ret=[0]
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 Begin /bin/rm -rf /var/packages/gitea/WIZARD_UIFILES
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 End /bin/rm -rf /var/packages/gitea/WIZARD_UIFILES ret=[0]
2026/02/28 22:25:26 upgrade gitea 1.25.4-27 Begin /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/WIZARD_UIFILES /var/packages/gitea/WIZARD_UIFILES
2026/02/28 22:25:27 upgrade gitea 1.25.4-27 End /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/WIZARD_UIFILES /var/packages/gitea/WIZARD_UIFILES ret=[0]
2026/02/28 22:25:27 upgrade gitea 1.25.4-27 Begin /bin/rm -rf /var/packages/gitea/conf
2026/02/28 22:25:27 upgrade gitea 1.25.4-27 End /bin/rm -rf /var/packages/gitea/conf ret=[0]
2026/02/28 22:25:27 upgrade gitea 1.25.4-27 Begin /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/conf /var/packages/gitea/conf
2026/02/28 22:25:27 upgrade gitea 1.25.4-27 End /bin/mv -f /volume1/@tmp/synopkg/install.tU28o0/conf /var/packages/gitea/conf ret=[0]
2026/02/28 22:25:53 Acquire systemd-unit for gitea when 0x0002 (ready)
2026/02/28 22:25:54 Acquire systemd-unit for gitea when 0x0002 (done)
2026/02/28 22:25:54 Acquire data-share for gitea when 0x0002 (ready)
2026/02/28 22:25:54 Acquire data-share for gitea when 0x0002 (done)
2026/02/28 22:25:54 Acquire port-config for gitea when 0x0002 (ready)
2026/02/28 22:25:55 Acquire port-config for gitea when 0x0002 (done)
2026/02/28 22:26:18 upgrade gitea 1.25.4-27 Begin postinst
2026/02/28 22:26:21 upgrade gitea 1.25.4-27 End postinst ret=[0]
2026/02/28 22:26:21 upgrade gitea 1.25.4-27 Begin postupgrade
2026/02/28 22:26:23 upgrade gitea 1.25.4-27 End postupgrade ret=[0]
2026/02/28 22:26:23 upgrade gitea: begin to start version 1.25.4-27
2026/02/28 22:26:26 Acquire data-share for gitea when 0x0002 (ready)
2026/02/28 22:26:26 Acquire data-share for gitea when 0x0002 (done)
2026/02/28 22:26:26 Acquire port-config for gitea when 0x0002 (ready)
2026/02/28 22:26:26 Acquire port-config for gitea when 0x0002 (done)
2026/02/28 22:26:26 upgrade gitea 1.25.4-27 Begin start-stop-status start
2026/02/28 22:26:49 upgrade gitea 1.25.4-27 End start-stop-status start ret=[1]
2026/02/28 22:26:49 Release port-config for gitea when 0x0002 (ready)
2026/02/28 22:26:49 Release port-config for gitea when 0x0002 (done)
2026/02/28 22:26:51 upgrade gitea: start version 1.25.4-27 failed, result 0
2026/02/28 22:26:52 upgrade gitea from 1.25.0-26 to 1.25.4-27 successfully

[mreid-tt]

hey @techniinfolinux, I've not been able to reproduce the issue you reported however I have some thoughts on the root cause. Can you provide the service log contents from /var/packages/gitea/var/gitea.log when the package fails to start?

[techniinfolinux]

[---moved to description---]

The key line is Password: su: Permission denied. On DS216se with DSM 7.1.1, the su command prompts for a password when switching to the sc-gitea system account, then fails because system accounts have no password set. The workaround is to call su without the - login flag and pass the script path directly as argument instead of using -c with quoted commands.

[mreid-tt]

Are you sure you are running on DSM 7? There is nothing in the codebase that uses su on DSM 7. Additionally, the service-setup.sh script for this package does not utilise a service_prestart function as noted here:

spksrc/spk/gitea/src/service-setup.sh

Line 11 in 66edc65

SERVICE_COMMAND="env ${ENV} ${GITEA} web --port ${SERVICE_PORT} --pid ${PID_FILE}"

From my tests on DSM 7.1.1-42962 Update 9, the service log should look like this:

Mon Mar  2 08:41:17 AST 2026
Starting gitea command env PATH=/var/packages/git/target/bin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/syno/sbin:/usr/syno/bin:/usr/local/sbin:/usr/local/bin HOME=/volume1/@apphome/gitea /volume1/@appstore/gitea/bin/gitea web --port 8418 --pid /volume1/@appdata/gitea/gitea.pid
2026/03/02 08:41:17 cmd/web.go:266:runWeb() [I] Starting Gitea on PID: 14655
2026/03/02 08:41:17 cmd/web.go:114:showWebStartupMessage() [I] Gitea version: 1.25.4 built with GNU Make 4.3, go1.25.5 : bindata, sqlite, sqlite_unlock_notify
2026/03/02 08:41:17 cmd/web.go:115:showWebStartupMessage() [I] * RunMode: prod
2026/03/02 08:41:17 cmd/web.go:116:showWebStartupMessage() [I] * AppPath: /volume1/@appstore/gitea/bin/gitea
2026/03/02 08:41:17 cmd/web.go:117:showWebStartupMessage() [I] * WorkPath: /var/packages/gitea/var
2026/03/02 08:41:17 cmd/web.go:118:showWebStartupMessage() [I] * CustomPath: /var/packages/gitea/var/custom
2026/03/02 08:41:17 cmd/web.go:119:showWebStartupMessage() [I] * ConfigFile: /var/packages/gitea/var/conf.ini
2026/03/02 08:41:17 cmd/web.go:120:showWebStartupMessage() [I] Prepare to run install page
2026/03/02 08:41:18 cmd/web.go:328:listen() [I] Listen: http://0.0.0.0:8418
2026/03/02 08:41:18 cmd/web.go:332:listen() [I] AppURL(ROOT_URL): http://192.168.10.71:8418/
2026/03/02 08:41:18 modules/graceful/server.go:50:NewServer() [I] Starting new Web server: tcp:0.0.0.0:8418 on PID: 14655

[techniinfolinux]

Here is the proof that I'm running DSM 7.1.1:

root@DS216se:~# cat /etc/VERSION
majorversion="7"
minorversion="1"
major="7"
minor="1"
micro="1"
productversion="7.1.1"
buildphase="GM"
buildnumber="42962"
smallfixnumber="9"
nano="9"
base="42962"
builddate="2025/07/29"
buildtime="14:21:17"

root@DS216se:~# uname -a
Linux DS216se 3.2.101 #42962 Mon Aug 19 15:11:31 CST 2024 armv7l GNU/Linux synology_armada370_216se

Key details:

DSM 7.1.1-42962 Update 9
Kernel: Linux 3.2.101 (very old kernel, shipped with this hardware)
Architecture: ARMv7l
Platform: synology_armada370_216se

Note: despite running DSM 7, the kernel is 3.2.101 which is extremely old. This may explain why the su command behaves differently than on more recent Synology hardware running DSM 7.

[mreid-tt]

hey @techniinfolinux, thanks for the additional evidence. I am still struggling to understand why this is happening since the functions referenced in your log should not be called in DSM 7. In your deployment you should see a file exactly like this one:

Script extract

DSM71:~$ cat /var/packages/gitea/scripts/start-stop-status 
#!/bin/sh

# Default display name
DNAME="${SYNOPKG_PKGNAME}"

[---snip---]

start_daemon ()
{
    i=0
    if [ -z "${SVC_QUIET}" ]; then
        if [ -z "${SVC_KEEP_LOG}" ]; then
            date > ${LOG_FILE}
        else
            date >> ${LOG_FILE}
        fi
    fi
    call_func "service_prestart"
    printf "%s" "$SERVICE_COMMAND" | while read -r service || [ -n "$service" ]
    do
        i=$((i + 1))
        if [ -z "${SVC_QUIET}" ]; then
            echo "Starting ${DNAME} command ${service}" >> ${LOG_FILE}
        fi
        if [ -n "${service}" ]; then
            if [ -n "${SVC_NO_REDIRECT}" ]; then
                OUT="/dev/null"
            else
                OUT="${LOG_FILE}"
            fi
            if [ -n "${USER}" -a -n "${SYNOPKG_DSM_VERSION_MAJOR}" -a "$SYNOPKG_DSM_VERSION_MAJOR" -lt 6 ]; then
                if [ -z "${SVC_CWD}" ]; then
                    SVC_CD=""
                else
                    SVC_CD="cd ${SVC_CWD}; "
                fi
                if [ -n "${SYNOPKG_DSM_VERSION_MAJOR}" ] && [ "${SYNOPKG_DSM_VERSION_MAJOR}" -lt 7 ]; then
                    SU="su ${EFF_USER} -s"
                else
                    SU=""
                fi
                if [ -z "${SVC_BACKGROUND}" ]; then
                    $SU /bin/sh -c "${SVC_CD}${service}" >> ${OUT} 2>&1
                else
                    $SU /bin/sh -c "${SVC_CD}${service}" >> ${OUT} 2>&1 &
                fi

            else
                # DSM 6 user is set by conf/privilege
                if [ -n "${SVC_CWD}" ]; then
                    cd "${SVC_CWD}"
                fi
                if [ -z "${SVC_BACKGROUND}" ]; then
                    ${service} >> ${OUT} 2>&1
                else
                    ${service} >> ${OUT} 2>&1 &
                fi
            fi
            if [ -n "${SVC_WRITE_PID}" -a -n "${SVC_BACKGROUND}" -a -n "${PID_FILE}" ]; then
                [ $i -eq 1 ] && echo -ne "$!" > ${PID_FILE} || echo -ne " $!" >> ${PID_FILE}
            else
                wait_for_status 0 ${SVC_WAIT_TIMEOUT:=20}
            fi
        fi
    done
}

[---snip---]

In your service log you show this line:

Starting gitea command su sc-gitea -s /bin/sh -c /var/packages/gitea/scripts/gitea-start.sh

This would correspond to the function call above:

SU="su ${EFF_USER} -s"
[...]
$SU /bin/sh -c "${SVC_CD}${service}" >> ${OUT} 2>&1

The problem is that this block will only fire under this condition:

[ "${SYNOPKG_DSM_VERSION_MAJOR}" -lt 7 ]

But based on your provided evidence:

majorversion="7"

So this should never fire under normal circumstances.

Do other packages behave like this? For example another Go-based package would be File Browser. If you install that package does it also fail to run with a similar service log error? It should since the start-stop-status script is identical.

Another possibility would be to uninstall Gitea and re-install with the current version. I would suggest that if there were something corrupted but I don't have any evidence of corruption based on what you have sent so far (other than your workaround for gitea-start.sh which is not part of the package).

[techniinfolinux]

Looking back at the debug output from earlier in my investigation (sh -x /var/packages/gitea/scripts/start-stop-status start), I can see the root cause:

+ '[' '' -lt 7 ']'
/var/packages/gitea/scripts/start-stop-status: line 6: [: : integer expression expected

The variable SYNOPKG_DSM_VERSION_MAJOR is empty when the script runs. This causes the condition [ "${SYNOPKG_DSM_VERSION_MAJOR}" -lt 7 ] to fail with "integer expression expected", and the script falls into the wrong branch, triggering the su call as if it were DSM < 6.

This explains everything. The question is: why is SYNOPKG_DSM_VERSION_MAJOR not being set on this hardware (Marvell Armada 370, kernel 3.2.101) under DSM 7.1.1?

[mreid-tt]

This explains everything. The question is: why is SYNOPKG_DSM_VERSION_MAJOR not being set on this hardware (Marvell Armada 370, kernel 3.2.101) under DSM 7.1.1?

That is bizarre indeed since this variable is provided by DSM itself (see: https://help.synology.com/developer-guide/synology_package/script_env_var.html). Could your DSM deployment itself be corrupt?

I would suggest installing a similar Go-based package like File Browser to confirm if it behaves the same way.

[techniinfolinux]

The variable SYNOPKG_DSM_VERSION_MAJOR is completely absent from the environment, even when checked directly:

root@DS216se:~# echo $SYNOPKG_DSM_VERSION_MAJOR

root@DS216se:~# env | grep SYNOPKG

root@DS216se:~# sh -x /var/packages/gitea/scripts/start-stop-status start 2>&1 | grep "SYNOPKG_DSM"

All three commands return nothing. DSM is not injecting SYNOPKG_DSM_VERSION_MAJOR into the environment on this hardware.

This is likely specific to the very old kernel 3.2.101 running on the Marvell Armada 370. Despite DSM 7.1.1 being installed, Synology ships this NAS with a kernel that is over 10 years old and the variable injection mechanism may not work the same way as on more recent hardware.

My DSM installation does not appear corrupted — all other packages work normally. The issue seems to be that DSM 7 on this specific hardware (armada370) does not properly expose SYNOPKG_DSM_VERSION_MAJOR to package scripts, causing start-stop-status to fall into the wrong execution branch.

[mreid-tt]

All three commands return nothing. DSM is not injecting SYNOPKG_DSM_VERSION_MAJOR into the environment on this hardware.

These are script environment variables. They are not persistent across the OS so you will not see it this way. You can try attaching a script like this to your SERVICE_COMMAND= to see the runtime variables:

Script example

#!/bin/sh

env_output=$(env | sort | grep '^SYNO')

page_items=""
i=1

# Save env_output to a temp file to avoid subshell issues
tmpfile="/tmp/syno_env.$$"
printf '%s\n' "$env_output" > "$tmpfile"

while IFS= read -r line; do
    item="{\"type\": \"textfield\", \"subitems\": [{\"key\": \"env_$i\", \"desc\": \"Data $i\", \"defaultValue\": \"$line\"}]}"
    
    if [ -z "$page_items" ]; then
        page_items="$item"
    else
        page_items="$page_items,
            $item"
    fi

    i=$((i + 1))
done < "$tmpfile"

rm -f "$tmpfile"

PAGE_VARS=$(cat <<EOF
[
    {
        "step_title": "Show Variables",
        "items": [
            $page_items
        ]
    }
]
EOF
)

echo "$PAGE_VARS" > "$SYNOPKG_TEMP_LOGFILE"

echo "$env_output" > "/volume1/@tmp/env_output_${SYNOPKG_PKG_STATUS}_${SYNOPKG_DSM_VERSION_MAJOR}.${SYNOPKG_DSM_VERSION_MINOR}.txt"

I have used this script in the past to attach as wizard UI files to see which environment variables were available on INSTALL vs. UPGRADE vs. UNINSTALL across various DSM versions. Once you run it you should see the output in a text file in the /volume1/@tmp/ folder.

This is likely specific to the very old kernel 3.2.101 running on the Marvell Armada 370. Despite DSM 7.1.1 being installed, Synology ships this NAS with a kernel that is over 10 years old and the variable injection mechanism may not work the same way as on more recent hardware.

While it is true that Synology ships a very old kernel, this would not be the reason for this behaviour.

My DSM installation does not appear corrupted — all other packages work normally. The issue seems to be that DSM 7 on this specific hardware (armada370) does not properly expose SYNOPKG_DSM_VERSION_MAJOR to package scripts, causing start-stop-status to fall into the wrong execution branch.

If all other packages from SynoCommunity work as expected then something else in the environment is off since they would all use the exact same start-stop-status script. So every other SynoCommunity package should have the same issue.

[techniinfolinux]

Good news: SYNOPKG_DSM_VERSION_MAJOR=7 IS present at runtime (captured inside service_prestart). So the variable injection works correctly.

However I found the real issue: in service-setup we set USER="sc-gitea" which overwrites the system USER variable. The start-stop-status script then reads this USER variable and since it is now set to sc-gitea (non-empty), it enters the wrong condition branch:

if [ -n "${USER}" -a -n "${SYNOPKG_DSM_VERSION_MAJOR}" -a "$SYNOPKG_DSM_VERSION_MAJOR" -lt 6 ]; then

USER is non-empty → condition partially matches → script falls into the su branch meant for DSM < 6.
The fix would be to rename USER to something like SVC_USER in service-setup to avoid this collision with the system variable.