[BUG] OLED DIsplay Test Screen freezes during Calibration Verify stage

[SeongGino]

Describe the bug
When calibrating a profile with a display enabled and working, the screen shows the four visible points during most of the process. However, when the user is verifying the resulting calibration, the display stops updating until the user continues or restarts the procedure.

To Reproduce

1. Enter calibration (either docked or standalone)
2. Calibrate a profile, observing the display functioning throughout the process.
3. Finish calibration and initiate verification; observe the screen being frozen at this point.

Expected behavior
Screen should continue to update throughout.

System Info

• Microcontroller board: Any
• OpenFIRE Firmware version: Release v6.0

Additional context
Honestly, the way the screen works at this point is a little unoptimized in general, and could use some further tweaking.

[alessandro-satanassi]

solved on #124

[SeongGino]

@alessandro-satanassi Please don't prematurely state if a PR is meant to close an issue in the issue thread - GitHub does this already if the PR text mentions the issue it's meaning to address without sending me duplicate emails.

[alessandro-satanassi]

ok, sorry, but I still have to get used to it and I don't know github very well, but I'm slowly getting used to it