Remove double defined settings to stop printer linter from being judgemental

THeijmans · THeijmans · commit 0a21ccf37fcb · 2025-12-23T15:04:28.000+01:00
diff --git a/resources/definitions/ultimaker_s8.def.json b/resources/definitions/ultimaker_s8.def.json
@@ -455,11 +455,9 @@
         "seam_overhang_angle": { "value": 35 },
         "skin_material_flow": { "value": 93 },
         "skin_outline_count": { "value": 0 },
-        "skin_overlap": { "value": 20 },
         "skin_support_speed": { "value": "speed_infill * infill_material_flow / skin_support_material_flow" },
         "skirt_brim_minimal_length": { "value": 1000 },
         "skirt_line_count": { "value": 5 },
-        "small_skin_on_surface": { "value": false },
         "small_skin_width": { "value": 4 },
         "speed_flooring":
         {
diff --git a/resources/variants/ultimaker_s6_aa025.inst.cfg b/resources/variants/ultimaker_s6_aa025.inst.cfg
@@ -117,11 +117,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s6_aa04.inst.cfg b/resources/variants/ultimaker_s6_aa04.inst.cfg
@@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s6_aa08.inst.cfg b/resources/variants/ultimaker_s6_aa08.inst.cfg
@@ -127,11 +127,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s6_cc04.inst.cfg b/resources/variants/ultimaker_s6_cc04.inst.cfg
@@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s6_cc06.inst.cfg b/resources/variants/ultimaker_s6_cc06.inst.cfg
@@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s8_aa025.inst.cfg b/resources/variants/ultimaker_s8_aa025.inst.cfg
@@ -117,11 +117,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s8_aa04.inst.cfg b/resources/variants/ultimaker_s8_aa04.inst.cfg
@@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s8_aa08.inst.cfg b/resources/variants/ultimaker_s8_aa08.inst.cfg
@@ -127,11 +127,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s8_cc04.inst.cfg b/resources/variants/ultimaker_s8_cc04.inst.cfg
@@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
diff --git a/resources/variants/ultimaker_s8_cc06.inst.cfg b/resources/variants/ultimaker_s8_cc06.inst.cfg
@@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern
 seam_overhang_angle = =support_angle
 skin_material_flow = =0.95 * material_flow
 skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1
-skin_overlap = 20
 skin_support_speed = =bridge_skin_speed
 skirt_brim_minimal_length = 250
 skirt_line_count = 1
-small_skin_on_surface = False
 small_skin_width = =skin_line_width * 2
 speed_flooring = =speed_topbottom
 speed_infill = =speed_print
