cutting bug

[rozaxd1998s]

Cura Version

5.5.0

Operating System

Windows 11 Pro Education/12th Gen Inte(R) core(TM) i3-1215U (1.20 GHz)

Printer

Antycubic Vyper

Reproduction steps

i created a 3d plik named lemon holder bc it was for holding lemon.i created it in tinkercad (mb usefull). i got the plick into ultimate cura 5.5.0 (last time i cheked it was 5.5.0 so its old idk).put the plik in cura (plik is in polish document or idk im not teacher) and tried to cut ( in translate said ,,potnij" in polish cut bc u cut plick to analise how lond and tell later the printer.logical)

Actual results

after i tried to cut the plik (read the info above at least for me) for a moment did the stuf id normaly did ( loading the plik, cutting into layers, the bar moving) but after some time (4/5s lmao) it said it cant cut the plik for no reason just took me here (to tell that it doesnt like the plick i gave it or somthing (i wasnt loged on this account just made and i used cura without loging)

Expected results

normaly i put the plik in the ULTIMATE cura for momend the cricle spins the plik apears, i move it somewere,scale it or dont do anythink to the plik, add suports, let the cura cut the do the analysis (im ton sciencist) it tells me how long , i get the pendrive into laptop (yes not computer, laptop) get the plick on the pendrive that gets the info onto the disk (it looks like old plik but black and on one side it has stuf so it can tell the printer what to do just gives info) i get safeley the pendrive with disk out , go to 3d printer, get the disk out the pendrive, put the disk into 3d printer and print (happy with the info?!)

Add your .zip and screenshots here ⬇️

i used tinkercad to make the plik but it never hapend. i use stl bc other pliks dont work for my printer. using generic PLA/noticed when cutting the cutting bar was grey normaly it was blue(idk i dont watch it load but i know for sure it was blue)

[GregValiant]

Your version of Cura is 8 or 10 versions behind the current version (5.11.0). You need to upgrade as the problem may have been fixed.

I'll mark this as a duplicate (there were many reports of Not Slicing from Cura 5.5 and 5.6) and close it. You can try "repairing" the model using on-line tools, but you should really update your Cura installation.