From 179c48765eb2a70a0ab4337f98f7b770d2b95889 Mon Sep 17 00:00:00 2001 From: THeijmans Date: Tue, 23 Dec 2025 13:04:19 +0100 Subject: [PATCH 1/3] PP-708 Set presets for skin support S6/S8 --- resources/definitions/ultimaker_s8.def.json | 1 + resources/variants/ultimaker_s6_aa025.inst.cfg | 1 + resources/variants/ultimaker_s6_aa04.inst.cfg | 1 + resources/variants/ultimaker_s6_aa08.inst.cfg | 1 + resources/variants/ultimaker_s6_cc04.inst.cfg | 1 + resources/variants/ultimaker_s6_cc06.inst.cfg | 1 + resources/variants/ultimaker_s8_aa025.inst.cfg | 1 + resources/variants/ultimaker_s8_aa04.inst.cfg | 1 + resources/variants/ultimaker_s8_aa08.inst.cfg | 1 + resources/variants/ultimaker_s8_cc04.inst.cfg | 1 + resources/variants/ultimaker_s8_cc06.inst.cfg | 1 + 11 files changed, 11 insertions(+) diff --git a/resources/definitions/ultimaker_s8.def.json b/resources/definitions/ultimaker_s8.def.json index d3744c9aff1..56a5f5cdfd2 100644 --- a/resources/definitions/ultimaker_s8.def.json +++ b/resources/definitions/ultimaker_s8.def.json @@ -457,6 +457,7 @@ "skin_outline_count": { "value": 0 }, "skin_overlap": { "value": 20 }, "skin_preshrink": { "value": 0 }, + "skin_support_speed": { "value": "speed_infill * infill_material_flow / skin_support_material_flow" }, "skirt_brim_minimal_length": { "value": 1000 }, "skirt_brim_speed": { diff --git a/resources/variants/ultimaker_s6_aa025.inst.cfg b/resources/variants/ultimaker_s6_aa025.inst.cfg index b343f11c2c9..1d1462cf5de 100644 --- a/resources/variants/ultimaker_s6_aa025.inst.cfg +++ b/resources/variants/ultimaker_s6_aa025.inst.cfg @@ -119,6 +119,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 diff --git a/resources/variants/ultimaker_s6_aa04.inst.cfg b/resources/variants/ultimaker_s6_aa04.inst.cfg index c09ff1cf251..7b364ddad0e 100644 --- a/resources/variants/ultimaker_s6_aa04.inst.cfg +++ b/resources/variants/ultimaker_s6_aa04.inst.cfg @@ -118,6 +118,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 diff --git a/resources/variants/ultimaker_s6_aa08.inst.cfg b/resources/variants/ultimaker_s6_aa08.inst.cfg index ee5cd320d35..1667d749029 100644 --- a/resources/variants/ultimaker_s6_aa08.inst.cfg +++ b/resources/variants/ultimaker_s6_aa08.inst.cfg @@ -129,6 +129,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 diff --git a/resources/variants/ultimaker_s6_cc04.inst.cfg b/resources/variants/ultimaker_s6_cc04.inst.cfg index 8474b14bf03..409a41dde3b 100644 --- a/resources/variants/ultimaker_s6_cc04.inst.cfg +++ b/resources/variants/ultimaker_s6_cc04.inst.cfg @@ -118,6 +118,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 diff --git a/resources/variants/ultimaker_s6_cc06.inst.cfg b/resources/variants/ultimaker_s6_cc06.inst.cfg index 50ba28b788b..702c05faa05 100644 --- a/resources/variants/ultimaker_s6_cc06.inst.cfg +++ b/resources/variants/ultimaker_s6_cc06.inst.cfg @@ -118,6 +118,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 diff --git a/resources/variants/ultimaker_s8_aa025.inst.cfg b/resources/variants/ultimaker_s8_aa025.inst.cfg index 1b6ead480e3..e6903039c52 100644 --- a/resources/variants/ultimaker_s8_aa025.inst.cfg +++ b/resources/variants/ultimaker_s8_aa025.inst.cfg @@ -119,6 +119,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 diff --git a/resources/variants/ultimaker_s8_aa04.inst.cfg b/resources/variants/ultimaker_s8_aa04.inst.cfg index 94e411aa20e..a7e26a6669e 100644 --- a/resources/variants/ultimaker_s8_aa04.inst.cfg +++ b/resources/variants/ultimaker_s8_aa04.inst.cfg @@ -118,6 +118,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 diff --git a/resources/variants/ultimaker_s8_aa08.inst.cfg b/resources/variants/ultimaker_s8_aa08.inst.cfg index 4f403d77e5e..cd2df359e54 100644 --- a/resources/variants/ultimaker_s8_aa08.inst.cfg +++ b/resources/variants/ultimaker_s8_aa08.inst.cfg @@ -129,6 +129,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 diff --git a/resources/variants/ultimaker_s8_cc04.inst.cfg b/resources/variants/ultimaker_s8_cc04.inst.cfg index fc93603f85b..bae282d7d96 100644 --- a/resources/variants/ultimaker_s8_cc04.inst.cfg +++ b/resources/variants/ultimaker_s8_cc04.inst.cfg @@ -118,6 +118,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 diff --git a/resources/variants/ultimaker_s8_cc06.inst.cfg b/resources/variants/ultimaker_s8_cc06.inst.cfg index 874227e9b86..5b304dd2bbc 100644 --- a/resources/variants/ultimaker_s8_cc06.inst.cfg +++ b/resources/variants/ultimaker_s8_cc06.inst.cfg @@ -118,6 +118,7 @@ skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x +skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 From 5fb075f5a4bd0e24232c71d385153420acc35b8f Mon Sep 17 00:00:00 2001 From: THeijmans Date: Tue, 23 Dec 2025 14:02:21 +0100 Subject: [PATCH 2/3] Remove double defined settings --- resources/definitions/ultimaker_s8.def.json | 6 ------ resources/variants/ultimaker_s6_aa025.inst.cfg | 2 -- resources/variants/ultimaker_s6_aa04.inst.cfg | 2 -- resources/variants/ultimaker_s6_aa08.inst.cfg | 2 -- resources/variants/ultimaker_s6_cc04.inst.cfg | 2 -- resources/variants/ultimaker_s6_cc06.inst.cfg | 2 -- resources/variants/ultimaker_s8_aa025.inst.cfg | 2 -- resources/variants/ultimaker_s8_aa04.inst.cfg | 2 -- resources/variants/ultimaker_s8_aa08.inst.cfg | 2 -- resources/variants/ultimaker_s8_cc04.inst.cfg | 2 -- resources/variants/ultimaker_s8_cc06.inst.cfg | 2 -- 11 files changed, 26 deletions(-) diff --git a/resources/definitions/ultimaker_s8.def.json b/resources/definitions/ultimaker_s8.def.json index 56a5f5cdfd2..8ad33d90631 100644 --- a/resources/definitions/ultimaker_s8.def.json +++ b/resources/definitions/ultimaker_s8.def.json @@ -456,14 +456,8 @@ "skin_material_flow": { "value": 93 }, "skin_outline_count": { "value": 0 }, "skin_overlap": { "value": 20 }, - "skin_preshrink": { "value": 0 }, "skin_support_speed": { "value": "speed_infill * infill_material_flow / skin_support_material_flow" }, "skirt_brim_minimal_length": { "value": 1000 }, - "skirt_brim_speed": - { - "maximum_value_warning": 300, - "value": "speed_layer_0" - }, "skirt_line_count": { "value": 5 }, "small_skin_on_surface": { "value": false }, "small_skin_width": { "value": 4 }, diff --git a/resources/variants/ultimaker_s6_aa025.inst.cfg b/resources/variants/ultimaker_s6_aa025.inst.cfg index 1d1462cf5de..e24f3a9fd02 100644 --- a/resources/variants/ultimaker_s6_aa025.inst.cfg +++ b/resources/variants/ultimaker_s6_aa025.inst.cfg @@ -118,10 +118,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 diff --git a/resources/variants/ultimaker_s6_aa04.inst.cfg b/resources/variants/ultimaker_s6_aa04.inst.cfg index 7b364ddad0e..ba74112999c 100644 --- a/resources/variants/ultimaker_s6_aa04.inst.cfg +++ b/resources/variants/ultimaker_s6_aa04.inst.cfg @@ -117,10 +117,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 diff --git a/resources/variants/ultimaker_s6_aa08.inst.cfg b/resources/variants/ultimaker_s6_aa08.inst.cfg index 1667d749029..fe94e13ba14 100644 --- a/resources/variants/ultimaker_s6_aa08.inst.cfg +++ b/resources/variants/ultimaker_s6_aa08.inst.cfg @@ -128,10 +128,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 diff --git a/resources/variants/ultimaker_s6_cc04.inst.cfg b/resources/variants/ultimaker_s6_cc04.inst.cfg index 409a41dde3b..1251fabb054 100644 --- a/resources/variants/ultimaker_s6_cc04.inst.cfg +++ b/resources/variants/ultimaker_s6_cc04.inst.cfg @@ -117,10 +117,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 diff --git a/resources/variants/ultimaker_s6_cc06.inst.cfg b/resources/variants/ultimaker_s6_cc06.inst.cfg index 702c05faa05..fada7016455 100644 --- a/resources/variants/ultimaker_s6_cc06.inst.cfg +++ b/resources/variants/ultimaker_s6_cc06.inst.cfg @@ -117,10 +117,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 diff --git a/resources/variants/ultimaker_s8_aa025.inst.cfg b/resources/variants/ultimaker_s8_aa025.inst.cfg index e6903039c52..4d47526cf0d 100644 --- a/resources/variants/ultimaker_s8_aa025.inst.cfg +++ b/resources/variants/ultimaker_s8_aa025.inst.cfg @@ -118,10 +118,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 diff --git a/resources/variants/ultimaker_s8_aa04.inst.cfg b/resources/variants/ultimaker_s8_aa04.inst.cfg index a7e26a6669e..7bc10be6222 100644 --- a/resources/variants/ultimaker_s8_aa04.inst.cfg +++ b/resources/variants/ultimaker_s8_aa04.inst.cfg @@ -117,10 +117,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 diff --git a/resources/variants/ultimaker_s8_aa08.inst.cfg b/resources/variants/ultimaker_s8_aa08.inst.cfg index cd2df359e54..41cda85a9a7 100644 --- a/resources/variants/ultimaker_s8_aa08.inst.cfg +++ b/resources/variants/ultimaker_s8_aa08.inst.cfg @@ -128,10 +128,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 diff --git a/resources/variants/ultimaker_s8_cc04.inst.cfg b/resources/variants/ultimaker_s8_cc04.inst.cfg index bae282d7d96..668b1d8a06c 100644 --- a/resources/variants/ultimaker_s8_cc04.inst.cfg +++ b/resources/variants/ultimaker_s8_cc04.inst.cfg @@ -117,10 +117,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 diff --git a/resources/variants/ultimaker_s8_cc06.inst.cfg b/resources/variants/ultimaker_s8_cc06.inst.cfg index 5b304dd2bbc..81eceec9d57 100644 --- a/resources/variants/ultimaker_s8_cc06.inst.cfg +++ b/resources/variants/ultimaker_s8_cc06.inst.cfg @@ -117,10 +117,8 @@ seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 skin_overlap = 20 -skin_preshrink = =wall_line_width_0 + (wall_line_count - 1) * wall_line_width_x skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 -skirt_brim_speed = =speed_layer_0 skirt_line_count = 1 small_skin_on_surface = False small_skin_width = =skin_line_width * 2 From 0a21ccf37fcb418577a44667d4b29c0484a97bf9 Mon Sep 17 00:00:00 2001 From: THeijmans Date: Tue, 23 Dec 2025 15:04:28 +0100 Subject: [PATCH 3/3] Remove double defined settings to stop printer linter from being judgemental --- resources/definitions/ultimaker_s8.def.json | 2 -- resources/variants/ultimaker_s6_aa025.inst.cfg | 2 -- resources/variants/ultimaker_s6_aa04.inst.cfg | 2 -- resources/variants/ultimaker_s6_aa08.inst.cfg | 2 -- resources/variants/ultimaker_s6_cc04.inst.cfg | 2 -- resources/variants/ultimaker_s6_cc06.inst.cfg | 2 -- resources/variants/ultimaker_s8_aa025.inst.cfg | 2 -- resources/variants/ultimaker_s8_aa04.inst.cfg | 2 -- resources/variants/ultimaker_s8_aa08.inst.cfg | 2 -- resources/variants/ultimaker_s8_cc04.inst.cfg | 2 -- resources/variants/ultimaker_s8_cc06.inst.cfg | 2 -- 11 files changed, 22 deletions(-) diff --git a/resources/definitions/ultimaker_s8.def.json b/resources/definitions/ultimaker_s8.def.json index 8ad33d90631..c84336a96ed 100644 --- a/resources/definitions/ultimaker_s8.def.json +++ b/resources/definitions/ultimaker_s8.def.json @@ -455,11 +455,9 @@ "seam_overhang_angle": { "value": 35 }, "skin_material_flow": { "value": 93 }, "skin_outline_count": { "value": 0 }, - "skin_overlap": { "value": 20 }, "skin_support_speed": { "value": "speed_infill * infill_material_flow / skin_support_material_flow" }, "skirt_brim_minimal_length": { "value": 1000 }, "skirt_line_count": { "value": 5 }, - "small_skin_on_surface": { "value": false }, "small_skin_width": { "value": 4 }, "speed_flooring": { diff --git a/resources/variants/ultimaker_s6_aa025.inst.cfg b/resources/variants/ultimaker_s6_aa025.inst.cfg index e24f3a9fd02..72435684fe8 100644 --- a/resources/variants/ultimaker_s6_aa025.inst.cfg +++ b/resources/variants/ultimaker_s6_aa025.inst.cfg @@ -117,11 +117,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s6_aa04.inst.cfg b/resources/variants/ultimaker_s6_aa04.inst.cfg index ba74112999c..87658fa0f6c 100644 --- a/resources/variants/ultimaker_s6_aa04.inst.cfg +++ b/resources/variants/ultimaker_s6_aa04.inst.cfg @@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s6_aa08.inst.cfg b/resources/variants/ultimaker_s6_aa08.inst.cfg index fe94e13ba14..11dea4b358b 100644 --- a/resources/variants/ultimaker_s6_aa08.inst.cfg +++ b/resources/variants/ultimaker_s6_aa08.inst.cfg @@ -127,11 +127,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s6_cc04.inst.cfg b/resources/variants/ultimaker_s6_cc04.inst.cfg index 1251fabb054..6e310b80a21 100644 --- a/resources/variants/ultimaker_s6_cc04.inst.cfg +++ b/resources/variants/ultimaker_s6_cc04.inst.cfg @@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s6_cc06.inst.cfg b/resources/variants/ultimaker_s6_cc06.inst.cfg index fada7016455..e53d5856702 100644 --- a/resources/variants/ultimaker_s6_cc06.inst.cfg +++ b/resources/variants/ultimaker_s6_cc06.inst.cfg @@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s8_aa025.inst.cfg b/resources/variants/ultimaker_s8_aa025.inst.cfg index 4d47526cf0d..bd393b4cf54 100644 --- a/resources/variants/ultimaker_s8_aa025.inst.cfg +++ b/resources/variants/ultimaker_s8_aa025.inst.cfg @@ -117,11 +117,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s8_aa04.inst.cfg b/resources/variants/ultimaker_s8_aa04.inst.cfg index 7bc10be6222..76f7c601ea5 100644 --- a/resources/variants/ultimaker_s8_aa04.inst.cfg +++ b/resources/variants/ultimaker_s8_aa04.inst.cfg @@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s8_aa08.inst.cfg b/resources/variants/ultimaker_s8_aa08.inst.cfg index 41cda85a9a7..eb2d66bea8a 100644 --- a/resources/variants/ultimaker_s8_aa08.inst.cfg +++ b/resources/variants/ultimaker_s8_aa08.inst.cfg @@ -127,11 +127,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s8_cc04.inst.cfg b/resources/variants/ultimaker_s8_cc04.inst.cfg index 668b1d8a06c..d3cdf103d7c 100644 --- a/resources/variants/ultimaker_s8_cc04.inst.cfg +++ b/resources/variants/ultimaker_s8_cc04.inst.cfg @@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print diff --git a/resources/variants/ultimaker_s8_cc06.inst.cfg b/resources/variants/ultimaker_s8_cc06.inst.cfg index 81eceec9d57..22f1f28daf9 100644 --- a/resources/variants/ultimaker_s8_cc06.inst.cfg +++ b/resources/variants/ultimaker_s8_cc06.inst.cfg @@ -116,11 +116,9 @@ roofing_pattern = =top_bottom_pattern seam_overhang_angle = =support_angle skin_material_flow = =0.95 * material_flow skin_outline_count = =0 if top_bottom_pattern == 'concentric' and top_bottom_pattern_0 == 'concentric' and roofing_layer_count <= 0 else 1 -skin_overlap = 20 skin_support_speed = =bridge_skin_speed skirt_brim_minimal_length = 250 skirt_line_count = 1 -small_skin_on_surface = False small_skin_width = =skin_line_width * 2 speed_flooring = =speed_topbottom speed_infill = =speed_print