KNX Cover does not support datatype 9.023

[bytefactory73]

I have several Somfy ILT 510 knx interfaces in my knx setup.

The set position is 8 bit (which works)

The knx app returns the current position of the cover as 16 byte 9.023 percent value (this doesn't work atm).

The HA knx monitor receives the value correctly:

would it be possible to allow also the 9.023 datatype here in "Current Position" to get proper states (e.g. when moving with the move/stop telegram and stopping somewhere in the middle, the knx bus sends the position as 9.023 16 byte value)

Thx
Tilo

[bytefactory73]

in entity_store_schema.py line 183 i found this:

        vol.Optional(CONF_GA_POSITION_STATE): GASelector(
            write=False, valid_dpt="5.001"
        ),

would it work to change this line to:

        vol.Optional(CONF_GA_POSITION_STATE): GASelector(
            write=False, valid_dpt=["5.001","9.023"]
        ),