fix

Author: puboy7

docs/get_started/en/AMOLED/T-Display-S3-AMOLED-Plus/T-Display-S3-AMOLED-Plus.md

@@ -79,23 +79,23 @@ Github：[T-Display S3 AMOLED Plus](https://github.com/Xinyuan-LilyGO/LilyGo-AMO
 
 | Setting                               | Value                                 |
 | -------------------------------| ------------------------------- |
-Board	|ESP32S3 Dev Module
-Port	|Your port
-USB CDC On Boot	|Enable
-CPU Frequency	|240MHZ(WiFi)
-Core Debug Level	|None
-USB DFU On Boot	|Disable
-Erase All Flash Before Sketch Upload	|Disable
-Events Run On	|Core1
-Flash Mode	|QIO 80MHZ
-Flash Size	|16MB(128Mb)
-Arduino Runs On	|Core1
-USB Firmware MSC On Boot	|Disable
-Partition Scheme	|16M Flash(3M APP/9.9MB FATFS)
-PSRAM	|OPI PSRAM
-Upload Mode	|UART0/Hardware CDC
-Upload Speed	|921600
-USB Mode	|CDC and JTAG  
+|Board	|ESP32S3 Dev Module
+|Port	|Your port
+|USB CDC On Boot	|Enable
+|CPU Frequency	|240MHZ(WiFi)
+|Core Debug Level	|None
+|USB DFU On Boot	|Disable
+|Erase All Flash Before Sketch Upload	|Disable
+|Events Run On	|Core1
+|Flash Mode	|QIO 80MHZ
+|Flash Size	|16MB(128Mb)
+|Arduino Runs On	|Core1
+|USB Firmware MSC On Boot	|Disable
+|Partition Scheme	|16M Flash(3M APP/9.9MB FATFS)
+|PSRAM	|OPI PSRAM
+|Upload Mode	|UART0/Hardware CDC
+|Upload Speed	|921600
+|USB Mode	|CDC and JTAG  
 
 
 ### Development Platform

docs/get_started/zh/AMOLED/T-Display-S3-AMOLED-Plus/T-Display-S3-AMOLED-Plus.md

@@ -78,23 +78,23 @@ Github：[T-Display S3 AMOLED Plus](https://github.com/Xinyuan-LilyGO/LilyGo-AMO
 
 | Setting                               | Value                                 |
 | -------------------------------| ------------------------------- |
-Board	|ESP32S3 Dev Module
-Port	|Your port
-USB CDC On Boot	|Enable
-CPU Frequency	|240MHZ(WiFi)
-Core Debug Level	|None
-USB DFU On Boot	|Disable
-Erase All Flash Before Sketch Upload	|Disable
-Events Run On	|Core1
-Flash Mode	|QIO 80MHZ
-Flash Size	|16MB(128Mb)
-Arduino Runs On	|Core1
-USB Firmware MSC On Boot	|Disable
-Partition Scheme	|16M Flash(3M APP/9.9MB FATFS)
-PSRAM	|OPI PSRAM
-Upload Mode	|UART0/Hardware CDC
-Upload Speed	|921600
-USB Mode	|CDC and JTAG  
+|Board	|ESP32S3 Dev Module
+|Port	|Your port
+|USB CDC On Boot	|Enable
+|CPU Frequency	|240MHZ(WiFi)
+|Core Debug Level	|None
+|USB DFU On Boot	|Disable
+|Erase All Flash Before Sketch Upload	|Disable
+|Events Run On	|Core1
+|Flash Mode	|QIO 80MHZ
+|Flash Size	|16MB(128Mb)
+|Arduino Runs On	|Core1
+|USB Firmware MSC On Boot	|Disable
+|Partition Scheme	|16M Flash(3M APP/9.9MB FATFS)
+|PSRAM	|OPI PSRAM
+|Upload Mode	|UART0/Hardware CDC
+|Upload Speed	|921600
+|USB Mode	|CDC and JTAG  
 
 ### 开发平台
 1. [Micropython](https://micropython.org/)