Leggi questo README in altre lingue.
Questo pacchetto ti permette di installare Pi-hole su un server YunoHost in modo semplice e veloce.
Se non hai YunoHost, consulta la guida per imparare a installarlo.
The Pi-hole® is a DNS sinkhole that protects your devices from unwanted content without installing any client-side software.
Versione pubblicata: 5.14.2~ynh4
Use the admin panel of your Pi-hole to configure this app. You may also need to follow the post-install guide to setup Pi-hole either as a DNS server or a DHCP server.
- Activate DHCP with Pi-hole needs manual configuration of your router.
Be careful, you should considering that playing with your DHCP may break your network.
In case your server is down, you will lose your dns resolution and ip address.
So, you will lose any internet connection and even the connection to your router.
If you encounter this kind of problem, please see "How to restore my network" at the end of this document.
There're two ways to configure Pi-hole to be used as your DHCP server.
- Either you can choose to use it when you install the app.
- Or you can activate the DHCP server afterwards in the "Settings" tab, "Pi-hole DHCP Server" part.
In this second case, it can be better to set the ip of the server to a static address
Your personal router or ISP's router has a DHCP server enabled by default.
If you keep this DHCP, along with Pi-hole's one, you will have transparent conflicts between them.
The first DHCP to respond will distribute its own ip and settings.
So you have to turn off the DHCP of your router to let Pi-hole managed your network.
By using the DHCP of Pi-hole, you allow Pi-hole to give at each of your client its dns configuration. This way every requests will be filtered by Pi-hole.
Another use case of using Pi-hole's DHCP is if you have hairpinning problems (You can't connect to your server because its IP is your public IP, and your router doesn't allow that).
In this case, using Pi-hole's dns will allow you to connect to your server by its local address instead of its public one.
Oh crap !
Your Pi-hole server is down, and you don't have a DHCP anymore.
Don't panic, We'll get through it. \o/
Use your favorite terminal on your desktop computer.
And first, get your main interface (usually eth0).
sudo ifconfigThen, set your ip as a static ip.
sudo ifconfig eth0 192.168.1.100Now, you can connect to your router and turn on its DHCP server to use it again.
You can now reset your ip and get a dynamic address.
sudo ifconfig eth0 0.0.0.0 && sudo dhclient eth0Don't forget to turn off the DHCP of your router if your server is working again.
- Sito web ufficiale dell’app: https://pi-hole.net/
- Documentazione ufficiale per gli amministratori: https://docs.pi-hole.net
- Repository upstream del codice dell’app: https://github.com/pi-hole/pi-hole
- Store di YunoHost: https://apps.yunohost.org/app/pihole
- Segnala un problema: https://github.com/YunoHost-Apps/pihole_ynh/issues
Si prega di inviare la tua pull request alla branch di testing.
Per provare la branch di testing, si prega di procedere in questo modo:
sudo yunohost app install https://github.com/YunoHost-Apps/pihole_ynh/tree/testing --debug
o
sudo yunohost app upgrade pihole -u https://github.com/YunoHost-Apps/pihole_ynh/tree/testing --debugMaggiori informazioni riguardo il pacchetto di quest’app: https://yunohost.org/packaging_apps