VNC into Pi

[Skippyinspace]

Ok silly question time but its not working for me.

Ip address of my camera is 192.168.1..129 or when I put that into my browser it brings up the web Ui but when I put that into realvnc to access the pi I get rejected by the computer message. Ive also forgotten my Indi allsky login (Something absolutly obvious!) but the question here is can you do darks from there.

Thanks

Ian

[aaronwmorris]

I am afraid I do not know anything about setting up the VNC access.

The password to indi-allsky can be reset on the CLI: https://github.com/aaronwmorris/indi-allsky/wiki/Web-Interface-Password

Darks also have to be taken from the CLI: https://github.com/aaronwmorris/indi-allsky/wiki/Dark-Calibration-Frames The process for taking darks takes too long (longer than 3 minutes) to be done via the web interface.

[jimmauck]

Ian, are you able to ssh to the PI? That is the most straight forward method to get to the CLI.

[Skippyinspace]

I did try but for some reason it didnt open. Will give it a try when Im back home Ian

…

On Mon, Sep 29, 2025 at 2:58 AM JimMauck ***@***.***> wrote: Ian, are you able to ssh to the PI? That is the most straight forward method to get to the CLI. — Reply to this email directly, view it on GitHub <#2414 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AOAZSOHNMSLIZNJGZTFL2KD3VCG4LAVCNFSM6AAAAACHXD6KAGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTINJTG4YDSNQ> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>