declarative_component_schema.yaml

"$schema": http://json-schema.org/draft-07/schema#
"$id": https://github.com/airbytehq/airbyte/blob/master/airbyte-cdk/python/airbyte_cdk/sources/declarative/declarative_component_schema.yaml
title: DeclarativeSource
type: object
description: An API source that extracts data according to its declarative components.
version: 1.0.0
required:
  - type
  - check
  - version
anyOf:
  - required:
      - streams
  - required:
      - dynamic_streams
properties:
  type:
    type: string
    enum: [DeclarativeSource]
  check:
    anyOf:
      - "$ref": "#/definitions/CheckStream"
      - "$ref": "#/definitions/CheckDynamicStream"
  streams:
    type: array
    items:
      "$ref": "#/definitions/DeclarativeStream"
  dynamic_streams:
    type: array
    items:
      "$ref": "#/definitions/DynamicDeclarativeStream"
  version:
    type: string
    description: The version of the Airbyte CDK used to build and test the source.
  schemas:
    "$ref": "#/definitions/Schemas"
  definitions:
    type: object
  spec:
    "$ref": "#/definitions/Spec"
  concurrency_level:
    "$ref": "#/definitions/ConcurrencyLevel"
  api_budget:
    "$ref": "#/definitions/HTTPAPIBudget"
  max_concurrent_async_job_count:
    title: Maximum Concurrent Asynchronous Jobs
    description: Maximum number of concurrent asynchronous jobs to run. This property is only relevant for sources/streams that support asynchronous job execution through the AsyncRetriever (e.g. a report-based stream that initiates a job, polls the job status, and then fetches the job results). This is often set by the API's maximum number of concurrent jobs on the account level. Refer to the API's documentation for this information.
    type: integer
  metadata:
    type: object
    description: For internal Airbyte use only - DO NOT modify manually. Used by consumers of declarative manifests for storing related metadata.
    additionalProperties: true
  description:
    type: string
    description: A description of the connector. It will be presented on the Source documentation page.
additionalProperties: false
definitions:
  AddedFieldDefinition:
    title: Definition Of Field To Add
    description: Defines the field to add on a record.
    type: object
    required:
      - type
      - path
      - value
    properties:
      type:
        type: string
        enum: [AddedFieldDefinition]
      path:
        title: Path
        description: List of strings defining the path where to add the value on the record.
        type: array
        items:
          type: string
        examples:
          - ["segment_id"]
          - ["metadata", "segment_id"]
      value:
        title: Value
        description: Value of the new field. Use {{ record['existing_field'] }} syntax to refer to other fields in the record.
        type: string
        interpolation_context:
          - config
          - record
          - stream_interval
          - stream_partition
          - stream_slice
        examples:
          - "{{ record['updates'] }}"
          - "{{ record['MetaData']['LastUpdatedTime'] }}"
          - "{{ stream_partition['segment_id'] }}"
      value_type:
        title: Value Type
        description: Type of the value. If not specified, the type will be inferred from the value.
        "$ref": "#/definitions/ValueType"
      $parameters:
        type: object
        additionalProperties: true
  AddFields:
    title: Add Fields
    description: Transformation which adds field to an output record. The path of the added field can be nested.
    type: object
    required:
      - type
      - fields
    properties:
      type:
        type: string
        enum: [AddFields]
      fields:
        title: Fields
        description: List of transformations (path and corresponding value) that will be added to the record.
        type: array
        items:
          "$ref": "#/definitions/AddedFieldDefinition"
      $parameters:
        type: object
        additionalProperties: true
  ApiKeyAuthenticator:
    title: API Key Authenticator
    description: Authenticator for requests authenticated with an API token injected as an HTTP request header.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [ApiKeyAuthenticator]
      api_token:
        title: API Key
        description: The API key to inject in the request. Fill it in the user inputs.
        type: string
        interpolation_context:
          - config
        examples:
          - "{{ config['api_key'] }}"
          - "Token token={{ config['api_key'] }}"
      header:
        title: Header Name
        description: The name of the HTTP header that will be set to the API key. This setting is deprecated, use inject_into instead. Header and inject_into can not be defined at the same time.
        type: string
        interpolation_context:
          - config
        examples:
          - Authorization
          - Api-Token
          - X-Auth-Token
      inject_into:
        title: Inject API Key Into Outgoing HTTP Request
        description: Configure how the API Key will be sent in requests to the source API. Either inject_into or header has to be defined.
        "$ref": "#/definitions/RequestOption"
        examples:
          - inject_into: header
            field_name: Authorization
          - inject_into: request_parameter
            field_name: authKey
      $parameters:
        type: object
        additionalProperties: true
  AuthFlow:
    title: "Auth flow"
    description: |-
      Additional and optional specification object to describe what an 'advanced' Auth flow would need to function.
        - A connector should be able to fully function with the configuration as described by the ConnectorSpecification in a 'basic' mode.
        - The 'advanced' mode provides easier UX for the user with UI improvements and automations. However, this requires further setup on the
        server side by instance or workspace admins beforehand. The trade-off is that the user does not have to provide as many technical
        inputs anymore and the auth process is faster and easier to complete.
    type: object
    properties:
      auth_flow_type:
        title: "Auth flow type"
        description: "The type of auth to use"
        type: string
        enum: ["oauth2.0", "oauth1.0"] # Future auth types should be added here
      predicate_key:
        title: "Predicate key"
        description: JSON path to a field in the connectorSpecification that should exist for the advanced auth to be applicable.
        type: array
        items:
          type: string
        examples:
          - ["credentials", "auth_type"]
      predicate_value:
        title: "Predicate value"
        description: Value of the predicate_key fields for the advanced auth to be applicable.
        type: string
        examples:
          - "Oauth"
      oauth_config_specification:
        "$ref": "#/definitions/OAuthConfigSpecification"
  BasicHttpAuthenticator:
    title: Basic HTTP Authenticator
    description: Authenticator for requests authenticated with the Basic HTTP authentication scheme, which encodes a username and an optional password in the Authorization request header.
    type: object
    required:
      - type
      - username
    properties:
      type:
        type: string
        enum: [BasicHttpAuthenticator]
      username:
        title: Username
        description: The username that will be combined with the password, base64 encoded and used to make requests. Fill it in the user inputs.
        type: string
        interpolation_context:
          - config
        examples:
          - "{{ config['username'] }}"
          - "{{ config['api_key'] }}"
      password:
        title: Password
        description: The password that will be combined with the username, base64 encoded and used to make requests. Fill it in the user inputs.
        type: string
        default: ""
        interpolation_context:
          - config
        examples:
          - "{{ config['password'] }}"
          - ""
      $parameters:
        type: object
        additionalProperties: true
  BearerAuthenticator:
    title: Bearer Token Authenticator
    description: "Authenticator for requests authenticated with a bearer token injected as a request header of the form `Authorization: Bearer <token>`."
    type: object
    required:
      - type
      - api_token
    properties:
      type:
        type: string
        enum: [BearerAuthenticator]
      api_token:
        title: Bearer Token
        description: Token to inject as request header for authenticating with the API.
        type: string
        interpolation_context:
          - config
        examples:
          - "{{ config['api_key'] }}"
          - "{{ config['token'] }}"
      $parameters:
        type: object
        additionalProperties: true
  SelectiveAuthenticator:
    title: Selective Authenticator
    description: Authenticator that selects concrete authenticator based on config property.
    type: object
    additionalProperties: true
    required:
      - type
      - authenticators
      - authenticator_selection_path
    properties:
      type:
        type: string
        enum: [SelectiveAuthenticator]
      authenticator_selection_path:
        title: Authenticator Selection Path
        description: Path of the field in config with selected authenticator name
        type: array
        items:
          type: string
        examples:
          - ["auth"]
          - ["auth", "type"]
      authenticators:
        title: Authenticators
        description: Authenticators to select from.
        type: object
        additionalProperties:
          anyOf:
            - "$ref": "#/definitions/ApiKeyAuthenticator"
            - "$ref": "#/definitions/BasicHttpAuthenticator"
            - "$ref": "#/definitions/BearerAuthenticator"
            - "$ref": "#/definitions/CustomAuthenticator"
            - "$ref": "#/definitions/OAuthAuthenticator"
            - "$ref": "#/definitions/JwtAuthenticator"
            - "$ref": "#/definitions/NoAuth"
            - "$ref": "#/definitions/SessionTokenAuthenticator"
            - "$ref": "#/definitions/LegacySessionTokenAuthenticator"
        examples:
          - authenticators:
              token: "#/definitions/ApiKeyAuthenticator"
              oauth: "#/definitions/OAuthAuthenticator"
              jwt: "#/definitions/JwtAuthenticator"
      $parameters:
        type: object
        additionalProperties: true
  CheckStream:
    title: Streams to Check
    description: Defines the streams to try reading when running a check operation.
    type: object
    required:
      - type
      - stream_names
    properties:
      type:
        type: string
        enum: [CheckStream]
      stream_names:
        title: Stream Names
        description: Names of the streams to try reading from when running a check operation.
        type: array
        items:
          type: string
        examples:
          - ["users"]
          - ["users", "contacts"]
  CheckDynamicStream:
    title: Dynamic Streams to Check
    description: (This component is experimental. Use at your own risk.) Defines the dynamic streams to try reading when running a check operation.
    type: object
    required:
      - type
      - stream_count
    properties:
      type:
        type: string
        enum: [CheckDynamicStream]
      stream_count:
        title: Stream Count
        description: Numbers of the streams to try reading from when running a check operation.
        type: integer
      use_check_availability:
        title: Use Check Availability
        description: Enables stream check availability. This field is automatically set by the CDK.
        type: boolean
        default: true
  CompositeErrorHandler:
    title: Composite Error Handler
    description: Error handler that sequentially iterates over a list of error handlers.
    type: object
    required:
      - type
      - error_handlers
    properties:
      type:
        type: string
        enum: [CompositeErrorHandler]
      error_handlers:
        title: Error Handlers
        description: List of error handlers to iterate on to determine how to handle a failed response.
        type: array
        items:
          anyOf:
            - "$ref": "#/definitions/CompositeErrorHandler"
            - "$ref": "#/definitions/DefaultErrorHandler"
      $parameters:
        type: object
        additionalProperties: true
  ConcurrencyLevel:
    title: Concurrency Level
    description: Defines the amount of parallelization for the streams that are being synced. The factor of parallelization is how many partitions or streams are synced at the same time. For example, with a concurrency_level of 10, ten streams or partitions of data will processed at the same time. Note that a value of 1 could create deadlock if a stream has a very high number of partitions.
    type: object
    required:
      - default_concurrency
    properties:
      type:
        type: string
        enum: [ConcurrencyLevel]
      default_concurrency:
        title: Default Concurrency
        description: The amount of concurrency that will applied during a sync. This value can be hardcoded or user-defined in the config if different users have varying volume thresholds in the target API.
        anyOf:
          - type: integer
          - type: string
        interpolation_context:
          - config
        examples:
          - 10
          - "{{ config['num_workers'] or 10 }}"
      max_concurrency:
        title: Max Concurrency
        description: The maximum level of concurrency that will be used during a sync. This becomes a required field when the default_concurrency derives from the config, because it serves as a safeguard against a user-defined threshold that is too high.
        type: integer
        examples:
          - 20
          - 100
      $parameters:
        type: object
        additionalProperties: true
  ConstantBackoffStrategy:
    title: Constant Backoff
    description: Backoff strategy with a constant backoff interval.
    type: object
    required:
      - type
      - backoff_time_in_seconds
    properties:
      type:
        type: string
        enum: [ConstantBackoffStrategy]
      backoff_time_in_seconds:
        title: Backoff Time
        description: Backoff time in seconds.
        anyOf:
          - type: number
          - type: string
        interpolation_context:
          - config
        examples:
          - 30
          - 30.5
          - "{{ config['backoff_time'] }}"
      $parameters:
        type: object
        additionalProperties: true
  CursorPagination:
    title: Cursor Pagination
    description: Pagination strategy that evaluates an interpolated string to define the next page to fetch.
    type: object
    required:
      - type
      - cursor_value
    properties:
      type:
        type: string
        enum: [CursorPagination]
      cursor_value:
        title: Cursor Value
        description: Value of the cursor defining the next page to fetch.
        type: string
        interpolation_context:
          - config
          - headers
          - last_page_size
          - last_record
          - response
        examples:
          - "{{ headers.link.next.cursor }}"
          - "{{ last_record['key'] }}"
          - "{{ response['nextPage'] }}"
      page_size:
        title: Page Size
        description: The number of records to include in each pages.
        type: integer
        examples:
          - 100
      stop_condition:
        title: Stop Condition
        description: Template string evaluating when to stop paginating.
        type: string
        interpolation_context:
          - config
          - headers
          - last_record
          - response
        examples:
          - "{{ response.data.has_more is false }}"
          - "{{ 'next' not in headers['link'] }}"
      $parameters:
        type: object
        additionalProperties: true
  CustomAuthenticator:
    title: Custom Authenticator
    description: Authenticator component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomAuthenticator]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom authentication strategy. Has to be a sub class of DeclarativeAuthenticator. The format is `source_<name>.<package>.<class_name>`.
        type: string
        additionalProperties: true
        examples:
          - "source_railz.components.ShortLivedTokenAuthenticator"
      $parameters:
        type: object
        additionalProperties: true
  CustomBackoffStrategy:
    title: Custom Backoff Strategy
    description: Backoff strategy component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomBackoffStrategy]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom backoff strategy. The format is `source_<name>.<package>.<class_name>`.
        type: string
        examples:
          - "source_railz.components.MyCustomBackoffStrategy"
      $parameters:
        type: object
        additionalProperties: true
  CustomErrorHandler:
    title: Custom Error Handler
    description: Error handler component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomErrorHandler]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom error handler. The format is `source_<name>.<package>.<class_name>`.
        type: string
        examples:
          - "source_railz.components.MyCustomErrorHandler"
      $parameters:
        type: object
        additionalProperties: true
  CustomIncrementalSync:
    title: Custom Incremental Sync
    description: Incremental component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
      - cursor_field
    properties:
      type:
        type: string
        enum: [CustomIncrementalSync]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom incremental sync. The format is `source_<name>.<package>.<class_name>`.
        type: string
        additionalProperties: true
        examples:
          - "source_railz.components.MyCustomIncrementalSync"
      cursor_field:
        description: The location of the value on a record that will be used as a bookmark during sync.
        type: string
      $parameters:
        type: object
        additionalProperties: true
  CustomPaginationStrategy:
    title: Custom Pagination Strategy
    description: Pagination strategy component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomPaginationStrategy]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom pagination strategy. The format is `source_<name>.<package>.<class_name>`.
        type: string
        examples:
          - "source_railz.components.MyCustomPaginationStrategy"
      $parameters:
        type: object
        additionalProperties: true
  CustomRecordExtractor:
    title: Custom Record Extractor
    description: Record extractor component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomRecordExtractor]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom record extraction strategy. The format is `source_<name>.<package>.<class_name>`.
        type: string
        examples:
          - "source_railz.components.MyCustomRecordExtractor"
      $parameters:
        type: object
        additionalProperties: true
  CustomRecordFilter:
    title: Custom Record Filter
    description: Record filter component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomRecordFilter]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom record filter strategy. The format is `source_<name>.<package>.<class_name>`.
        type: string
        examples:
          - "source_railz.components.MyCustomCustomRecordFilter"
      $parameters:
        type: object
        additionalProperties: true
  CustomRequester:
    title: Custom Requester
    description: Requester component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomRequester]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom requester strategy. The format is `source_<name>.<package>.<class_name>`.
        type: string
        additionalProperties: true
        examples:
          - "source_railz.components.MyCustomRecordExtractor"
      $parameters:
        type: object
        additionalProperties: true
  CustomRetriever:
    title: Custom Retriever
    description: Retriever component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomRetriever]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom retriever strategy. The format is `source_<name>.<package>.<class_name>`.
        type: string
        additionalProperties: true
        examples:
          - "source_railz.components.MyCustomRetriever"
      $parameters:
        type: object
        additionalProperties: true
  CustomPartitionRouter:
    title: Custom Partition Router
    description: Partition router component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomPartitionRouter]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom partition router. The format is `source_<name>.<package>.<class_name>`.
        type: string
        examples:
          - "source_railz.components.MyCustomPartitionRouter"
      $parameters:
        type: object
        additionalProperties: true
  CustomSchemaLoader:
    title: Custom Schema Loader
    description: Schema Loader component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomSchemaLoader]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom schema loader. The format is `source_<name>.<package>.<class_name>`.
        type: string
        examples:
          - "source_railz.components.MyCustomSchemaLoader"
      $parameters:
        type: object
        additionalProperties: true
  CustomSchemaNormalization:
    title: Custom Schema Normalization
    description: Schema normalization component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomSchemaNormalization]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom normalization. The format is `source_<name>.<package>.<class_name>`.
        type: string
        additionalProperties: true
        examples:
          - "source_amazon_seller_partner.components.LedgerDetailedViewReportsTypeTransformer"
      $parameters:
        type: object
        additionalProperties: true
  CustomStateMigration:
    title: Custom State Migration
    description: Apply a custom transformation on the input state.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomStateMigration]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom state migration. The format is `source_<name>.<package>.<class_name>`.
        type: string
        examples:
          - "source_railz.components.MyCustomStateMigration"
      $parameters:
        type: object
        additionalProperties: true
  CustomTransformation:
    title: Custom Transformation
    description: Transformation component whose behavior is derived from a custom code implementation of the connector.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomTransformation]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom transformation. The format is `source_<name>.<package>.<class_name>`.
        type: string
        examples:
          - "source_railz.components.MyCustomTransformation"
      $parameters:
        type: object
        additionalProperties: true
  LegacyToPerPartitionStateMigration:
    title: Legacy To Per-partition-state Migration
    description:
      'Transforms the input state for per-partitioned streams from the legacy format to the low-code format.
      The cursor field and partition ID fields are automatically extracted from the stream''s DatetimebasedCursor and SubstreamPartitionRouter.

      Example input state:
      {
      "13506132": {
      "last_changed": "2022-12-27T08:34:39+00:00"
      }
      Example output state:
      {
      "partition": {"id": "13506132"},
      "cursor": {"last_changed": "2022-12-27T08:34:39+00:00"}
      }
      '
    type: object
    additionalProperties: true
    properties:
      type:
        type: string
        enum: [LegacyToPerPartitionStateMigration]
  IncrementingCountCursor:
    title: Incrementing Count Cursor
    description: Cursor that allows for incremental sync according to a continuously increasing integer.
    type: object
    required:
      - type
      - cursor_field
    properties:
      type:
        type: string
        enum: [IncrementingCountCursor]
      cursor_field:
        title: Cursor Field
        description: The location of the value on a record that will be used as a bookmark during sync. To ensure no data loss, the API must return records in ascending order based on the cursor field. Nested fields are not supported, so the field must be at the top level of the record. You can use a combination of Add Field and Remove Field transformations to move the nested field to the top.
        type: string
        interpolation_context:
          - config
        examples:
          - "created_at"
          - "{{ config['record_cursor'] }}"
      start_value:
        title: Start Value
        description: The value that determines the earliest record that should be synced.
        anyOf:
          - type: string
          - type: integer
        interpolation_context:
          - config
        examples:
          - 0
          - "{{ config['start_value'] }}"
      start_value_option:
        title: Inject Start Value Into Outgoing HTTP Request
        description: Optionally configures how the start value will be sent in requests to the source API.
        "$ref": "#/definitions/RequestOption"
      $parameters:
        type: object
        additionalProperties: true
  DatetimeBasedCursor:
    title: Datetime Based Cursor
    description: Cursor to provide incremental capabilities over datetime.
    type: object
    required:
      - type
      - cursor_field
      - datetime_format
      - start_datetime
    properties:
      type:
        type: string
        enum: [DatetimeBasedCursor]
      clamping:
        title: Date Range Clamping
        description: This option is used to adjust the upper and lower boundaries of each datetime window to beginning and end of the provided target period (day, week, month)
        type: object
        required:
          - target
        properties:
          target:
            title: Target
            description: The period of time that datetime windows will be clamped by
            # This should ideally be an enum. However, we don't use an enum because we want to allow for connectors
            # to support interpolation on the connector config to get the target which is an arbitrary string
            type: string
            interpolation_context:
              - config
            examples:
              - "DAY"
              - "WEEK"
              - "MONTH"
              - "{{ config['target'] }}"
          target_details:
            type: object
            additionalProperties: true
      cursor_field:
        title: Cursor Field
        description: The location of the value on a record that will be used as a bookmark during sync. To ensure no data loss, the API must return records in ascending order based on the cursor field. Nested fields are not supported, so the field must be at the top level of the record. You can use a combination of Add Field and Remove Field transformations to move the nested field to the top.
        type: string
        interpolation_context:
          - config
        examples:
          - "created_at"
          - "{{ config['record_cursor'] }}"
      datetime_format:
        title: Outgoing Datetime Format
        description: |
          The datetime format used to format the datetime values that are sent in outgoing requests to the API. Use placeholders starting with "%" to describe the format the API is using. The following placeholders are available:
            * **%s**: Epoch unix timestamp - `1686218963`
            * **%s_as_float**: Epoch unix timestamp in seconds as float with microsecond precision - `1686218963.123456`
            * **%ms**: Epoch unix timestamp (milliseconds) - `1686218963123`
            * **%a**: Weekday (abbreviated) - `Sun`
            * **%A**: Weekday (full) - `Sunday`
            * **%w**: Weekday (decimal) - `0` (Sunday), `6` (Saturday)
            * **%d**: Day of the month (zero-padded) - `01`, `02`, ..., `31`
            * **%b**: Month (abbreviated) - `Jan`
            * **%B**: Month (full) - `January`
            * **%m**: Month (zero-padded) - `01`, `02`, ..., `12`
            * **%y**: Year (without century, zero-padded) - `00`, `01`, ..., `99`
            * **%Y**: Year (with century) - `0001`, `0002`, ..., `9999`
            * **%H**: Hour (24-hour, zero-padded) - `00`, `01`, ..., `23`
            * **%I**: Hour (12-hour, zero-padded) - `01`, `02`, ..., `12`
            * **%p**: AM/PM indicator
            * **%M**: Minute (zero-padded) - `00`, `01`, ..., `59`
            * **%S**: Second (zero-padded) - `00`, `01`, ..., `59`
            * **%f**: Microsecond (zero-padded to 6 digits) - `000000`
            * **%_ms**: Millisecond (zero-padded to 3 digits) - `000`
            * **%z**: UTC offset - `(empty)`, `+0000`, `-04:00`
            * **%Z**: Time zone name - `(empty)`, `UTC`, `GMT`
            * **%j**: Day of the year (zero-padded) - `001`, `002`, ..., `366`
            * **%U**: Week number of the year (starting Sunday) - `00`, ..., `53`
            * **%W**: Week number of the year (starting Monday) - `00`, ..., `53`
            * **%c**: Date and time - `Tue Aug 16 21:30:00 1988`
            * **%x**: Date standard format - `08/16/1988`
            * **%X**: Time standard format - `21:30:00`
            * **%%**: Literal '%' character

            Some placeholders depend on the locale of the underlying system - in most cases this locale is configured as en/US. For more information see the [Python documentation](https://docs.python.org/3/library/datetime.html#strftime-and-strptime-format-codes).
        type: string
        examples:
          - "%Y-%m-%dT%H:%M:%S.%f%z"
          - "%Y-%m-%d"
          - "%s"
          - "%ms"
          - "%s_as_float"
      start_datetime:
        title: Start Datetime
        description: The datetime that determines the earliest record that should be synced.
        anyOf:
          - type: string
          - "$ref": "#/definitions/MinMaxDatetime"
        interpolation_context:
          - config
        examples:
          - "2020-01-1T00:00:00Z"
          - "{{ config['start_time'] }}"
      cursor_datetime_formats:
        title: Cursor Datetime Formats
        description: The possible formats for the cursor field, in order of preference. The first format that matches the cursor field value will be used to parse it. If not provided, the `datetime_format` will be used.
        type: array
        items:
          type: string
          examples:
            - "%Y-%m-%dT%H:%M:%S.%f%z"
            - "%Y-%m-%d"
            - "%s"
      cursor_granularity:
        title: Cursor Granularity
        description:
          Smallest increment the datetime_format has (ISO 8601 duration) that is used to ensure the start of a slice does not overlap with the end of the previous one, e.g. for %Y-%m-%d the granularity should
          be P1D, for %Y-%m-%dT%H:%M:%SZ the granularity should be PT1S. Given this field is provided, `step` needs to be provided as well.
        type: string
        examples:
          - "PT1S"
      end_datetime:
        title: End Datetime
        description: The datetime that determines the last record that should be synced. If not provided, `{{ now_utc() }}` will be used.
        anyOf:
          - type: string
          - "$ref": "#/definitions/MinMaxDatetime"
        interpolation_context:
          - config
        examples:
          - "2021-01-1T00:00:00Z"
          - "{{ now_utc() }}"
          - "{{ day_delta(-1) }}"
      end_time_option:
        title: Inject End Time Into Outgoing HTTP Request
        description: Optionally configures how the end datetime will be sent in requests to the source API.
        "$ref": "#/definitions/RequestOption"
      is_data_feed:
        title: Whether the target API is formatted as a data feed
        description: A data feed API is an API that does not allow filtering and paginates the content from the most recent to the least recent. Given this, the CDK needs to know when to stop paginating and this field will generate a stop condition for pagination.
        type: boolean
      is_client_side_incremental:
        title: Whether the target API does not support filtering and returns all data (the cursor filters records in the client instead of the API side)
        description: If the target API endpoint does not take cursor values to filter records and returns all records anyway, the connector with this cursor will filter out records locally, and only emit new records from the last sync, hence incremental. This means that all records would be read from the API, but only new records will be emitted to the destination.
        type: boolean
      is_compare_strictly:
        title: Whether to skip requests if the start time equals the end time
        description: Set to True if the target API does not accept queries where the start time equal the end time.
        type: boolean
        default: False
      global_substream_cursor:
        title: Whether to store cursor as one value instead of per partition
        description: This setting optimizes performance when the parent stream has thousands of partitions by storing the cursor as a single value rather than per partition. Notably, the substream state is updated only at the end of the sync, which helps prevent data loss in case of a sync failure. See more info in the [docs](https://docs.airbyte.com/connector-development/config-based/understanding-the-yaml-file/incremental-syncs).
        type: boolean
        default: false
      lookback_window:
        title: Lookback Window
        description: Time interval before the start_datetime to read data for, e.g. P1M for looking back one month.
        type: string
        interpolation_context:
          - config
        examples:
          - "P1D"
          - "P{{ config['lookback_days'] }}D"
      partition_field_end:
        title: Partition Field End
        description: Name of the partition start time field.
        type: string
        examples:
          - "ending_time"
      partition_field_start:
        title: Partition Field Start
        description: Name of the partition end time field.
        type: string
        examples:
          - "starting_time"
      start_time_option:
        title: Inject Start Time Into Outgoing HTTP Request
        description: Optionally configures how the start datetime will be sent in requests to the source API.
        "$ref": "#/definitions/RequestOption"
      step:
        title: Step
        description: The size of the time window (ISO8601 duration). Given this field is provided, `cursor_granularity` needs to be provided as well.
        type: string
        examples:
          - "P1W"
          - "{{ config['step_increment'] }}"
      $parameters:
        type: object
        additionalProperties: true
  JwtAuthenticator:
    title: JWT Authenticator
    description: Authenticator for requests using JWT authentication flow.
    type: object
    required:
      - type
      - secret_key
      - algorithm
    properties:
      type:
        type: string
        enum: [JwtAuthenticator]
      secret_key:
        type: string
        description: Secret used to sign the JSON web token.
        examples:
          - "{{ config['secret_key'] }}"
      base64_encode_secret_key:
        type: boolean
        description: When set to true, the secret key will be base64 encoded prior to being encoded as part of the JWT. Only set to "true" when required by the API.
        default: False
      algorithm:
        type: string
        description: Algorithm used to sign the JSON web token.
        enum:
          [
            "HS256",
            "HS384",
            "HS512",
            "ES256",
            "ES256K",
            "ES384",
            "ES512",
            "RS256",
            "RS384",
            "RS512",
            "PS256",
            "PS384",
            "PS512",
            "EdDSA",
          ]
        examples:
          - ES256
          - HS256
          - RS256
          - "{{ config['algorithm'] }}"
      token_duration:
        type: integer
        title: Token Duration
        description: The amount of time in seconds a JWT token can be valid after being issued.
        default: 1200
        examples:
          - 1200
          - 3600
      header_prefix:
        type: string
        title: Header Prefix
        description: The prefix to be used within the Authentication header.
        examples:
          - "Bearer"
          - "Basic"
      jwt_headers:
        type: object
        title: JWT Headers
        description: JWT headers used when signing JSON web token.
        additionalProperties: false
        properties:
          kid:
            type: string
            title: Key Identifier
            description: Private key ID for user account.
            examples:
              - "{{ config['kid'] }}"
          typ:
            type: string
            title: Type
            description: The media type of the complete JWT.
            default: JWT
            examples:
              - JWT
          cty:
            type: string
            title: Content Type
            description: Content type of JWT header.
            examples:
              - JWT
      additional_jwt_headers:
        type: object
        title: Additional JWT Headers
        description: Additional headers to be included with the JWT headers object.
        additionalProperties: true
      jwt_payload:
        type: object
        title: JWT Payload
        description: JWT Payload used when signing JSON web token.
        additionalProperties: false
        properties:
          iss:
            type: string
            title: Issuer
            description: The user/principal that issued the JWT. Commonly a value unique to the user.
            examples:
              - "{{ config['iss'] }}"
          sub:
            type: string
            title: Subject
            description: The subject of the JWT. Commonly defined by the API.
          aud:
            type: string
            title: Audience
            description: The recipient that the JWT is intended for. Commonly defined by the API.
            examples:
              - "appstoreconnect-v1"
      additional_jwt_payload:
        type: object
        title: Additional JWT Payload Properties
        description: Additional properties to be added to the JWT payload.
        additionalProperties: true
      $parameters:
        type: object
        additionalProperties: true
  OAuthAuthenticator:
    title: OAuth2
    description: Authenticator for requests using OAuth 2.0 authorization flow.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [OAuthAuthenticator]
      client_id_name:
        title: Client ID Property Name
        description: The name of the property to use to refresh the `access_token`.
        type: string
        default: "client_id"
        examples:
          - custom_app_id
      client_id:
        title: Client ID
        description: The OAuth client ID. Fill it in the user inputs.
        type: string
        examples:
          - "{{ config['client_id }}"
          - "{{ config['credentials']['client_id }}"
      client_secret_name:
        title: Client Secret Property Name
        description: The name of the property to use to refresh the `access_token`.
        type: string
        default: "client_secret"
        examples:
          - custom_app_secret
      client_secret:
        title: Client Secret
        description: The OAuth client secret. Fill it in the user inputs.
        type: string
        examples:
          - "{{ config['client_secret }}"
          - "{{ config['credentials']['client_secret }}"
      refresh_token_name:
        title: Refresh Token Property Name
        description: The name of the property to use to refresh the `access_token`.
        type: string
        default: "refresh_token"
        examples:
          - custom_app_refresh_value
      refresh_token:
        title: Refresh Token
        description: Credential artifact used to get a new access token.
        type: string
        examples:
          - "{{ config['refresh_token'] }}"
          - "{{ config['credentials]['refresh_token'] }}"
      token_refresh_endpoint:
        title: Token Refresh Endpoint
        description: The full URL to call to obtain a new access token.
        type: string
        examples:
          - https://connect.squareup.com/oauth2/token
      access_token_name:
        title: Access Token Property Name
        description: The name of the property which contains the access token in the response from the token refresh endpoint.
        type: string
        default: "access_token"
        examples:
          - access_token
      access_token_value:
        title: Access Token Value
        description: The value of the access_token to bypass the token refreshing using `refresh_token`.
        type: string
        examples:
          - secret_access_token_value
      expires_in_name:
        title: Token Expiry Property Name
        description: The name of the property which contains the expiry date in the response from the token refresh endpoint.
        type: string
        default: "expires_in"
        examples:
          - expires_in
      grant_type_name:
        title: Grant Type Property Name
        description: The name of the property to use to refresh the `access_token`.
        type: string
        default: "grant_type"
        examples:
          - custom_grant_type
      grant_type:
        title: Grant Type
        description: Specifies the OAuth2 grant type. If set to refresh_token, the refresh_token needs to be provided as well. For client_credentials, only client id and secret are required. Other grant types are not officially supported.
        type: string
        default: "refresh_token"
        examples:
          - refresh_token
          - client_credentials
      refresh_request_body:
        title: Refresh Request Body
        description: Body of the request sent to get a new access token.
        type: object
        additionalProperties: true
        examples:
          - applicationId: "{{ config['application_id'] }}"
            applicationSecret: "{{ config['application_secret'] }}"
            token: "{{ config['token'] }}"
      refresh_request_headers:
        title: Refresh Request Headers
        description: Headers of the request sent to get a new access token.
        type: object
        additionalProperties: true
        examples:
          - Authorization: "<AUTH_TOKEN>"
            Content-Type: "application/x-www-form-urlencoded"
      scopes:
        title: Scopes
        description: List of scopes that should be granted to the access token.
        type: array
        items:
          type: string
        examples:
          - [
              "crm.list.read",
              "crm.objects.contacts.read",
              "crm.schema.contacts.read",
            ]
      token_expiry_date:
        title: Token Expiry Date
        description: The access token expiry date.
        type: string
        examples:
          - 2023-04-06T07:12:10.421833+00:00
          - 1680842386
      token_expiry_date_format:
        title: Token Expiry Date Format
        description: The format of the time to expiration datetime. Provide it if the time is returned as a date-time string instead of seconds.
        type: string
        examples:
          - "%Y-%m-%d %H:%M:%S.%f+00:00"
      refresh_token_updater:
        title: Token Updater
        description: When the token updater is defined, new refresh tokens, access tokens and the access token expiry date are written back from the authentication response to the config object. This is important if the refresh token can only used once.
        properties:
          refresh_token_name:
            title: Refresh Token Property Name
            description: The name of the property which contains the updated refresh token in the response from the token refresh endpoint.
            type: string
            default: "refresh_token"
            examples:
              - "refresh_token"
          access_token_config_path:
            title: Config Path To Access Token
            description: Config path to the access token. Make sure the field actually exists in the config.
            type: array
            items:
              type: string
            default: ["credentials", "access_token"]
            examples:
              - ["credentials", "access_token"]
              - ["access_token"]
          refresh_token_config_path:
            title: Config Path To Refresh Token
            description: Config path to the access token. Make sure the field actually exists in the config.
            type: array
            items:
              type: string
            default: ["credentials", "refresh_token"]
            examples:
              - ["credentials", "refresh_token"]
              - ["refresh_token"]
          token_expiry_date_config_path:
            title: Config Path To Expiry Date
            description: Config path to the expiry date. Make sure actually exists in the config.
            type: array
            items:
              type: string
            default: ["credentials", "token_expiry_date"]
            examples:
              - ["credentials", "token_expiry_date"]
          refresh_token_error_status_codes:
            title: Refresh Token Error Status Codes
            description: Status Codes to Identify refresh token error in response (Refresh Token Error Key and Refresh Token Error Values should be also specified). Responses with one of the error status code and containing an error value will be flagged as a config error
            type: array
            items:
              type: integer
            default: []
            examples:
              - [400, 500]
          refresh_token_error_key:
            title: Refresh Token Error Key
            description: Key to Identify refresh token error in response (Refresh Token Error Status Codes and Refresh Token Error Values should be also specified).
            type: string
            default: ""
            examples:
              - "error"
          refresh_token_error_values:
            title: Refresh Token Error Values
            description: 'List of values to check for exception during token refresh process. Used to check if the error found in the response matches the key from the Refresh Token Error Key field (e.g. response={"error": "invalid_grant"}). Only responses with one of the error status code and containing an error value will be flagged as a config error'
            type: array
            items:
              type: string
            default: []
            examples:
              - ["invalid_grant", "invalid_permissions"]
      profile_assertion:
        title: Profile Assertion
        description: The authenticator being used to authenticate the client authenticator.
        "$ref": "#/definitions/JwtAuthenticator"
      use_profile_assertion:
        title: Use Profile Assertion
        description: Enable using profile assertion as a flow for OAuth authorization.
        type: boolean
        default: false
      $parameters:
        type: object
        additionalProperties: true
  DeclarativeStream:
    title: Declarative Stream
    description: A stream whose behavior is described by a set of declarative low code components.
    type: object
    additionalProperties: true
    required:
      - type
      - retriever
    properties:
      type:
        type: string
        enum: [DeclarativeStream]
      retriever:
        title: Retriever
        description: Component used to coordinate how records are extracted across stream slices and request pages.
        anyOf:
          - "$ref": "#/definitions/AsyncRetriever"
          - "$ref": "#/definitions/CustomRetriever"
          - "$ref": "#/definitions/SimpleRetriever"
      incremental_sync:
        title: Incremental Sync
        description: Component used to fetch data incrementally based on a time field in the data.
        anyOf:
          - "$ref": "#/definitions/CustomIncrementalSync"
          - "$ref": "#/definitions/DatetimeBasedCursor"
          - "$ref": "#/definitions/IncrementingCountCursor"
      name:
        title: Name
        description: The stream name.
        type: string
        default: ""
        example:
          - "Users"
      primary_key:
        title: Primary Key
        description: The primary key of the stream.
        "$ref": "#/definitions/PrimaryKey"
        default: ""
      schema_loader:
        title: Schema Loader
        description: Component used to retrieve the schema for the current stream.
        anyOf:
          - "$ref": "#/definitions/DynamicSchemaLoader"
          - "$ref": "#/definitions/InlineSchemaLoader"
          - "$ref": "#/definitions/JsonFileSchemaLoader"
          - "$ref": "#/definitions/CustomSchemaLoader"
      # TODO we have move the transformation to the RecordSelector level in the code but kept this here for
      # compatibility reason. We should eventually move this to align with the code.
      transformations:
        title: Transformations
        description: A list of transformations to be applied to each output record.
        type: array
        items:
          anyOf:
            - "$ref": "#/definitions/AddFields"
            - "$ref": "#/definitions/CustomTransformation"
            - "$ref": "#/definitions/RemoveFields"
            - "$ref": "#/definitions/KeysToLower"
            - "$ref": "#/definitions/KeysToSnakeCase"
            - "$ref": "#/definitions/FlattenFields"
            - "$ref": "#/definitions/DpathFlattenFields"
            - "$ref": "#/definitions/KeysReplace"
      state_migrations:
        title: State Migrations
        description: Array of state migrations to be applied on the input state
        type: array
        items:
          anyOf:
            - "$ref": "#/definitions/LegacyToPerPartitionStateMigration"
            - "$ref": "#/definitions/CustomStateMigration"
        default: []
      $parameters:
        type: object
        additional_properties: true
  HTTPAPIBudget:
    title: HTTP API Budget
    description: >
      Defines how many requests can be made to the API in a given time frame. `HTTPAPIBudget` extracts the remaining
      call count and the reset time from HTTP response headers using the header names provided by
      `ratelimit_remaining_header` and `ratelimit_reset_header`. Only requests using `HttpRequester`
      are rate-limited; custom components that bypass `HttpRequester` are not covered by this budget.
    type: object
    required:
      - type
      - policies
    properties:
      type:
        type: string
        enum: [HTTPAPIBudget]
      policies:
        title: Policies
        description: List of call rate policies that define how many calls are allowed.
        type: array
        items:
          anyOf:
            - "$ref": "#/definitions/FixedWindowCallRatePolicy"
            - "$ref": "#/definitions/MovingWindowCallRatePolicy"
            - "$ref": "#/definitions/UnlimitedCallRatePolicy"
      ratelimit_reset_header:
        title: Rate Limit Reset Header
        description: The HTTP response header name that indicates when the rate limit resets.
        type: string
        default: "ratelimit-reset"
      ratelimit_remaining_header:
        title: Rate Limit Remaining Header
        description: The HTTP response header name that indicates the number of remaining allowed calls.
        type: string
        default: "ratelimit-remaining"
      status_codes_for_ratelimit_hit:
        title: Status Codes for Rate Limit Hit
        description: List of HTTP status codes that indicate a rate limit has been hit.
        type: array
        items:
          type: integer
        default: [429]
    additionalProperties: true
  FixedWindowCallRatePolicy:
    title: Fixed Window Call Rate Policy
    description: A policy that allows a fixed number of calls within a specific time window.
    type: object
    required:
      - type
      - period
      - call_limit
      - matchers
    properties:
      type:
        type: string
        enum: [FixedWindowCallRatePolicy]
      period:
        title: Period
        description: The time interval for the rate limit window.
        type: string
      call_limit:
        title: Call Limit
        description: The maximum number of calls allowed within the period.
        type: integer
      matchers:
        title: Matchers
        description: List of matchers that define which requests this policy applies to.
        type: array
        items:
          "$ref": "#/definitions/HttpRequestRegexMatcher"
    additionalProperties: true
  MovingWindowCallRatePolicy:
    title: Moving Window Call Rate Policy
    description: A policy that allows a fixed number of calls within a moving time window.
    type: object
    required:
      - type
      - rates
      - matchers
    properties:
      type:
        type: string
        enum: [MovingWindowCallRatePolicy]
      rates:
        title: Rates
        description: List of rates that define the call limits for different time intervals.
        type: array
        items:
          "$ref": "#/definitions/Rate"
      matchers:
        title: Matchers
        description: List of matchers that define which requests this policy applies to.
        type: array
        items:
          "$ref": "#/definitions/HttpRequestRegexMatcher"
    additionalProperties: true
  UnlimitedCallRatePolicy:
    title: Unlimited Call Rate Policy
    description: A policy that allows unlimited calls for specific requests.
    type: object
    required:
      - type
      - matchers
    properties:
      type:
        type: string
        enum: [UnlimitedCallRatePolicy]
      matchers:
        title: Matchers
        description: List of matchers that define which requests this policy applies to.
        type: array
        items:
          "$ref": "#/definitions/HttpRequestRegexMatcher"
    additionalProperties: true
  Rate:
    title: Rate
    description: Defines a rate limit with a specific number of calls allowed within a time interval.
    type: object
    required:
      - limit
      - interval
    properties:
      limit:
        title: Limit
        description: The maximum number of calls allowed within the interval.
        anyOf:
          - type: integer
          - type: string
        interpolation_context:
          - config
      interval:
        title: Interval
        description: The time interval for the rate limit.
        type: string
        examples:
          - "PT1H"
          - "P1D"
    additionalProperties: true
  HttpRequestRegexMatcher:
    title: HTTP Request Matcher
    description: >
      Matches HTTP requests based on method, base URL, URL path pattern, query parameters, and headers.
      Use `url_base` to specify the scheme and host (without trailing slash) and
      `url_path_pattern` to apply a regex to the request path.
    type: object
    properties:
      method:
        title: Method
        description: The HTTP method to match (e.g., GET, POST).
        type: string
      url_base:
        title: URL Base
        description: The base URL (scheme and host, e.g. "https://api.example.com") to match.
        type: string
      url_path_pattern:
        title: URL Path Pattern
        description: A regular expression pattern to match the URL path.
        type: string
      params:
        title: Parameters
        description: The query parameters to match.
        type: object
        additionalProperties: true
      headers:
        title: Headers
        description: The headers to match.
        type: object
        additionalProperties: true
    additionalProperties: true
  DefaultErrorHandler:
    title: Default Error Handler
    description: Component defining how to handle errors. Default behavior includes only retrying server errors (HTTP 5XX) and too many requests (HTTP 429) with an exponential backoff.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [DefaultErrorHandler]
      backoff_strategies:
        title: Backoff Strategies
        description: List of backoff strategies to use to determine how long to wait before retrying a retryable request.
        type: array
        items:
          anyOf:
            - "$ref": "#/definitions/ConstantBackoffStrategy"
            - "$ref": "#/definitions/CustomBackoffStrategy"
            - "$ref": "#/definitions/ExponentialBackoffStrategy"
            - "$ref": "#/definitions/WaitTimeFromHeader"
            - "$ref": "#/definitions/WaitUntilTimeFromHeader"
      max_retries:
        title: Max Retry Count
        description: The maximum number of time to retry a retryable request before giving up and failing.
        type: integer
        default: 5
        examples:
          - 5
          - 0
          - 10
      response_filters:
        title: Response Filters
        description: List of response filters to iterate on when deciding how to handle an error. When using an array of multiple filters, the filters will be applied sequentially and the response will be selected if it matches any of the filter's predicate.
        type: array
        items:
          "$ref": "#/definitions/HttpResponseFilter"
      $parameters:
        type: object
        additional_properties: true
  DefaultPaginator:
    title: Default Paginator
    description: Default pagination implementation to request pages of results with a fixed size until the pagination strategy no longer returns a next_page_token.
    type: object
    required:
      - type
      - pagination_strategy
    properties:
      type:
        type: string
        enum: [DefaultPaginator]
      pagination_strategy:
        title: Pagination Strategy
        description: Strategy defining how records are paginated.
        anyOf:
          - "$ref": "#/definitions/CursorPagination"
          - "$ref": "#/definitions/CustomPaginationStrategy"
          - "$ref": "#/definitions/OffsetIncrement"
          - "$ref": "#/definitions/PageIncrement"
      page_size_option:
        "$ref": "#/definitions/RequestOption"
      page_token_option:
        anyOf:
          - "$ref": "#/definitions/RequestOption"
          - "$ref": "#/definitions/RequestPath"
      $parameters:
        type: object
        additionalProperties: true
  DpathExtractor:
    title: Dpath Extractor
    description: Record extractor that searches a decoded response over a path defined as an array of fields.
    type: object
    required:
      - type
      - field_path
    properties:
      type:
        type: string
        enum: [DpathExtractor]
      field_path:
        title: Field Path
        description: List of potentially nested fields describing the full path of the field to extract. Use "*" to extract all values from an array. See more info in the [docs](https://docs.airbyte.com/connector-development/config-based/understanding-the-yaml-file/record-selector).
        type: array
        items:
          type: string
        interpolation_context:
          - config
        examples:
          - ["data"]
          - ["data", "records"]
          - ["data", "{{ parameters.name }}"]
          - ["data", "*", "record"]
      $parameters:
        type: object
        additionalProperties: true
  ResponseToFileExtractor:
    title: CSV To File Extractor
    description: A record extractor designed for handling large responses that may exceed memory limits (to prevent OOM issues). It downloads a CSV file to disk, reads the data from disk, and deletes the file once it has been fully processed.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [ResponseToFileExtractor]
      $parameters:
        type: object
        additionalProperties: true
  ExponentialBackoffStrategy:
    title: Exponential Backoff
    description: Backoff strategy with an exponential backoff interval. The interval is defined as factor * 2^attempt_count.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [ExponentialBackoffStrategy]
      factor:
        title: Factor
        description: Multiplicative constant applied on each retry.
        anyOf:
          - type: number
          - type: string
        default: 5
        interpolation_context:
          - config
        examples:
          - 5
          - 5.5
          - "10"
      $parameters:
        type: object
        additionalProperties: true
  SessionTokenAuthenticator:
    type: object
    required:
      - type
      - login_requester
      - session_token_path
      - request_authentication
    properties:
      type:
        type: string
        enum: [SessionTokenAuthenticator]
      login_requester:
        title: Login Requester
        description: Description of the request to perform to obtain a session token to perform data requests. The response body is expected to be a JSON object with a session token property.
        "$ref": "#/definitions/HttpRequester"
        examples:
          - type: HttpRequester
            url_base: "https://my_api.com"
            path: "/login"
            authenticator:
              type: BasicHttpAuthenticator
              username: "{{ config.username }}"
              password: "{{ config.password }}"
      session_token_path:
        title: Session Token Path
        description: The path in the response body returned from the login requester to the session token.
        examples:
          - ["access_token"]
          - ["result", "token"]
        type: array
        items:
          type: string
      expiration_duration:
        title: Expiration Duration
        description: The duration in ISO 8601 duration notation after which the session token expires, starting from the time it was obtained. Omitting it will result in the session token being refreshed for every request.
        type: string
        examples:
          - "PT1H"
          - "P1D"
      request_authentication:
        title: Data Request Authentication
        description: Authentication method to use for requests sent to the API, specifying how to inject the session token.
        anyOf:
          - "$ref": "#/definitions/SessionTokenRequestApiKeyAuthenticator"
          - "$ref": "#/definitions/SessionTokenRequestBearerAuthenticator"
      decoder:
        title: Decoder
        description: Component used to decode the response.
        anyOf:
          - "$ref": "#/definitions/JsonDecoder"
          - "$ref": "#/definitions/XmlDecoder"
      $parameters:
        type: object
        additionalProperties: true
  SessionTokenRequestApiKeyAuthenticator:
    type: object
    title: API Key Authenticator
    description: Authenticator for requests using the session token as an API key that's injected into the request.
    required:
      - type
      - inject_into
    properties:
      type:
        enum: [ApiKey]
      inject_into:
        title: Inject API Key Into Outgoing HTTP Request
        description: Configure how the API Key will be sent in requests to the source API.
        "$ref": "#/definitions/RequestOption"
        examples:
          - inject_into: header
            field_name: Authorization
          - inject_into: request_parameter
            field_name: authKey
  SessionTokenRequestBearerAuthenticator:
    title: Bearer Authenticator
    description: Authenticator for requests using the session token as a standard bearer token.
    required:
      - type
    properties:
      type:
        enum: [Bearer]
  HttpRequester:
    title: HTTP Requester
    description: Requester submitting HTTP requests and extracting records from the response.
    type: object
    required:
      - type
      - url_base
    properties:
      type:
        type: string
        enum: [HttpRequester]
      url_base:
        title: API Base URL
        description: Base URL of the API source. Do not put sensitive information (e.g. API tokens) into this field - Use the Authentication component for this.
        type: string
        interpolation_context:
          - config
          - next_page_token
          - stream_interval
          - stream_partition
          - stream_slice
          - creation_response
          - polling_response
          - download_target
        examples:
          - "https://connect.squareup.com/v2"
          - "{{ config['base_url'] or 'https://app.posthog.com'}}/api"
          - "https://connect.squareup.com/v2/quotes/{{ stream_partition['id'] }}/quote_line_groups"
          - "https://example.com/api/v1/resource/{{ next_page_token['id'] }}"
      path:
        title: URL Path
        description: Path the specific API endpoint that this stream represents. Do not put sensitive information (e.g. API tokens) into this field - Use the Authentication component for this.
        type: string
        interpolation_context:
          - config
          - next_page_token
          - stream_interval
          - stream_partition
          - stream_slice
          - creation_response
          - polling_response
          - download_target
        examples:
          - "/products"
          - "/quotes/{{ stream_partition['id'] }}/quote_line_groups"
          - "/trades/{{ config['symbol_id'] }}/history"
      authenticator:
        title: Authenticator
        description: Authentication method to use for requests sent to the API.
        anyOf:
          - "$ref": "#/definitions/ApiKeyAuthenticator"
          - "$ref": "#/definitions/BasicHttpAuthenticator"
          - "$ref": "#/definitions/BearerAuthenticator"
          - "$ref": "#/definitions/CustomAuthenticator"
          - "$ref": "#/definitions/OAuthAuthenticator"
          - "$ref": "#/definitions/JwtAuthenticator"
          - "$ref": "#/definitions/NoAuth"
          - "$ref": "#/definitions/SessionTokenAuthenticator"
          - "$ref": "#/definitions/LegacySessionTokenAuthenticator"
          - "$ref": "#/definitions/SelectiveAuthenticator"
      error_handler:
        title: Error Handler
        description: Error handler component that defines how to handle errors.
        anyOf:
          - "$ref": "#/definitions/DefaultErrorHandler"
          - "$ref": "#/definitions/CustomErrorHandler"
          - "$ref": "#/definitions/CompositeErrorHandler"
      http_method:
        title: HTTP Method
        description: The HTTP method used to fetch data from the source (can be GET or POST).
        type: string
        enum:
          - GET
          - POST
        default: GET
        examples:
          - GET
          - POST
      request_body_data:
        title: Request Body Payload (Non-JSON)
        description: Specifies how to populate the body of the request with a non-JSON payload. Plain text will be sent as is, whereas objects will be converted to a urlencoded form.
        anyOf:
          - type: string
          - type: object
            additionalProperties:
              type: string
        interpolation_context:
          - next_page_token
          - stream_interval
          - stream_partition
          - stream_slice
        examples:
          - |
            [{"clause": {"type": "timestamp", "operator": 10, "parameters":
                [{"value": {{ stream_interval['start_time'] | int * 1000 }} }]
              }, "orderBy": 1, "columnName": "Timestamp"}]/
      request_body_json:
        title: Request Body JSON Payload
        description: Specifies how to populate the body of the request with a JSON payload. Can contain nested objects.
        anyOf:
          - type: string
          - type: object
            additionalProperties: true
        interpolation_context:
          - next_page_token
          - stream_interval
          - stream_partition
          - stream_slice
        examples:
          - sort_order: "ASC"
            sort_field: "CREATED_AT"
          - key: "{{ config['value'] }}"
          - sort:
              field: "updated_at"
              order: "ascending"
      request_headers:
        title: Request Headers
        description: Return any non-auth headers. Authentication headers will overwrite any overlapping headers returned from this method.
        anyOf:
          - type: string
          - type: object
            additionalProperties:
              type: string
        interpolation_context:
          - next_page_token
          - stream_interval
          - stream_partition
          - stream_slice
        examples:
          - Output-Format: JSON
          - Version: "{{ config['version'] }}"
      request_parameters:
        title: Query Parameters
        description: Specifies the query parameters that should be set on an outgoing HTTP request given the inputs.
        anyOf:
          - type: string
          - type: object
            additionalProperties:
              type: string
        interpolation_context:
          - next_page_token
          - stream_interval
          - stream_partition
          - stream_slice
        examples:
          - unit: "day"
          - query: 'last_event_time BETWEEN TIMESTAMP "{{ stream_interval.start_time }}" AND TIMESTAMP "{{ stream_interval.end_time }}"'
          - searchIn: "{{ ','.join(config.get('search_in', [])) }}"
          - sort_by[asc]: updated_at
      use_cache:
        title: Use Cache
        description: Enables stream requests caching. This field is automatically set by the CDK.
        type: boolean
        default: false
      $parameters:
        type: object
        additionalProperties: true
  HttpResponseFilter:
    description: A filter that is used to select on properties of the HTTP response received. When used with additional filters, a response will be selected if it matches any of the filter's criteria.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [HttpResponseFilter]
      action:
        title: Action
        description: Action to execute if a response matches the filter.
        type: string
        enum:
          - SUCCESS
          - FAIL
          - RETRY
          - IGNORE
          - RATE_LIMITED
        examples:
          - SUCCESS
          - FAIL
          - RETRY
          - IGNORE
          - RATE_LIMITED
      failure_type:
        title: Failure Type
        description: Failure type of traced exception if a response matches the filter.
        type: string
        enum:
          - system_error
          - config_error
          - transient_error
        examples:
          - system_error
          - config_error
          - transient_error
      error_message:
        title: Error Message
        description: Error Message to display if the response matches the filter.
        type: string
        interpolation_context:
          - config
          - response
          - headers
      error_message_contains:
        title: Error Message Substring
        description: Match the response if its error message contains the substring.
        type: string
        example:
          - This API operation is not enabled for this site
      http_codes:
        title: HTTP Codes
        description: Match the response if its HTTP code is included in this list.
        type: array
        items:
          type: integer
        uniqueItems: true
        examples:
          - [420, 429]
          - [500]
      predicate:
        title: Predicate
        description: Match the response if the predicate evaluates to true.
        type: string
        interpolation_context:
          - response
          - headers
        examples:
          - "{{ 'Too much requests' in response }}"
          - "{{ 'error_code' in response and response['error_code'] == 'ComplexityException' }}"
      $parameters:
        type: object
        additionalProperties: true
  ComplexFieldType:
    title: Schema Field Type
    description: (This component is experimental. Use at your own risk.) Represents a complex field type.
    type: object
    required:
      - field_type
    properties:
      field_type:
        type: string
      items:
        anyOf:
          - type: string
          - "$ref": "#/definitions/ComplexFieldType"
  TypesMap:
    title: Types Map
    description: (This component is experimental. Use at your own risk.) Represents a mapping between a current type and its corresponding target type.
    type: object
    required:
      - target_type
      - current_type
    properties:
      target_type:
        anyOf:
          - type: string
          - type: array
            items:
              type: string
          - "$ref": "#/definitions/ComplexFieldType"
      current_type:
        anyOf:
          - type: string
          - type: array
            items:
              type: string
      condition:
        type: string
        interpolation_context:
          - raw_schema
  SchemaTypeIdentifier:
    title: Schema Type Identifier
    description: (This component is experimental. Use at your own risk.) Identifies schema details for dynamic schema extraction and processing.
    type: object
    required:
      - key_pointer
    properties:
      type:
        type: string
        enum: [SchemaTypeIdentifier]
      schema_pointer:
        title: Schema Path
        description: List of nested fields defining the schema field path to extract. Defaults to [].
        type: array
        default: []
        items:
          type: string
        interpolation_context:
          - config
      key_pointer:
        title: Key Path
        description: List of potentially nested fields describing the full path of the field key to extract.
        type: array
        items:
          type: string
        interpolation_context:
          - config
      type_pointer:
        title: Type Path
        description: List of potentially nested fields describing the full path of the field type to extract.
        type: array
        items:
          type: string
        interpolation_context:
          - config
      types_mapping:
        type: array
        items:
          "$ref": "#/definitions/TypesMap"
      $parameters:
        type: object
        additionalProperties: true
  DynamicSchemaLoader:
    title: Dynamic Schema Loader
    description: (This component is experimental. Use at your own risk.) Loads a schema by extracting data from retrieved records.
    type: object
    required:
      - type
      - retriever
      - schema_type_identifier
    properties:
      type:
        type: string
        enum: [DynamicSchemaLoader]
      retriever:
        title: Retriever
        description: Component used to coordinate how records are extracted across stream slices and request pages.
        anyOf:
          - "$ref": "#/definitions/AsyncRetriever"
          - "$ref": "#/definitions/CustomRetriever"
          - "$ref": "#/definitions/SimpleRetriever"
      schema_transformations:
        title: Schema Transformations
        description: A list of transformations to be applied to the schema.
        type: array
        items:
          anyOf:
            - "$ref": "#/definitions/AddFields"
            - "$ref": "#/definitions/CustomTransformation"
            - "$ref": "#/definitions/RemoveFields"
            - "$ref": "#/definitions/KeysToLower"
            - "$ref": "#/definitions/KeysToSnakeCase"
            - "$ref": "#/definitions/FlattenFields"
            - "$ref": "#/definitions/DpathFlattenFields"
            - "$ref": "#/definitions/KeysReplace"
      schema_type_identifier:
        "$ref": "#/definitions/SchemaTypeIdentifier"
      $parameters:
        type: object
        additionalProperties: true
  InlineSchemaLoader:
    title: Inline Schema Loader
    description: Loads a schema that is defined directly in the manifest file.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [InlineSchemaLoader]
      schema:
        title: Schema
        description: Describes a streams' schema. Refer to the <a href="https://docs.airbyte.com/understanding-airbyte/supported-data-types/">Data Types documentation</a> for more details on which types are valid.
        type: object
  JsonFileSchemaLoader:
    title: Json File Schema Loader
    description: Loads the schema from a json file.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [JsonFileSchemaLoader]
      file_path:
        title: File Path
        description: Path to the JSON file defining the schema. The path is relative to the connector module's root.
        type: string
        interpolation_context:
          - config
        example:
          - "./schemas/users.json"
      $parameters:
        type: object
        additionalProperties: true
  JsonDecoder:
    title: Json Decoder
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [JsonDecoder]
  JsonlDecoder:
    title: JSONL Decoder
    description: Use this if the response consists of JSON objects separated by new lines (`\n`) in JSONL format.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [JsonlDecoder]
  KeysToLower:
    title: Keys to Lower Case
    description: A transformation that renames all keys to lower case.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [KeysToLower]
      $parameters:
        type: object
        additionalProperties: true
  KeysToSnakeCase:
    title: Key to Snake Case
    description: A transformation that renames all keys to snake case.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [KeysToSnakeCase]
      $parameters:
        type: object
        additionalProperties: true
  FlattenFields:
    title: Flatten Fields
    description: A transformation that flatten record to single level format.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [FlattenFields]
      flatten_lists:
        title: Flatten Lists
        description: Whether to flatten lists or leave it as is. Default is True.
        type: boolean
        default: true
      $parameters:
        type: object
        additionalProperties: true
  DpathFlattenFields:
    title: Dpath Flatten Fields
    description: A transformation that flatten field values to the to top of the record.
    type: object
    required:
      - type
      - field_path
    properties:
      type:
        type: string
        enum: [DpathFlattenFields]
      field_path:
        title: Field Path
        description: A path to field that needs to be flattened.
        type: array
        items:
          type: string
        examples:
          - ["data"]
          - ["data", "*", "field"]
      delete_origin_value:
        title: Delete Origin Value
        description: Whether to delete the origin value or keep it. Default is False.
        type: boolean
      $parameters:
        type: object
        additionalProperties: true
  KeysReplace:
    title: Keys Replace
    description: A transformation that replaces symbols in keys.
    type: object
    required:
      - type
      - old
      - new
    properties:
      type:
        type: string
        enum: [KeysReplace]
      old:
        type: string
        title: Old value
        description: Old value to replace.
        examples:
          - " "
          - "{{ record.id }}"
          - "{{ config['id'] }}"
          - "{{ stream_slice['id'] }}"
        interpolation_context:
          - config
          - record
          - stream_slice
      new:
        type: string
        title: New value
        description: New value to set.
        examples:
          - "_"
          - "{{ record.id }}"
          - "{{ config['id'] }}"
          - "{{ stream_slice['id'] }}"
        interpolation_context:
          - config
          - record
          - stream_slice
      $parameters:
        type: object
        additionalProperties: true
  IterableDecoder:
    title: Iterable Decoder
    description: Use this if the response consists of strings separated by new lines (`\n`). The Decoder will wrap each row into a JSON object with the `record` key.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [IterableDecoder]
  XmlDecoder:
    title: XML Decoder
    description: Use this if the response is XML.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [XmlDecoder]
  CustomDecoder:
    title: Custom Decoder
    description: Use this to implement custom decoder logic.
    type: object
    additionalProperties: true
    required:
      - type
      - class_name
    properties:
      type:
        type: string
        enum: [CustomDecoder]
      class_name:
        title: Class Name
        description: Fully-qualified name of the class that will be implementing the custom decoding. Has to be a sub class of Decoder. The format is `source_<name>.<package>.<class_name>`.
        type: string
        additionalProperties: true
        examples:
          - "source_amazon_ads.components.GzipJsonlDecoder"
      $parameters:
        type: object
        additionalProperties: true
  ZipfileDecoder:
    title: Zipfile Decoder
    description: Decoder for response data that is returned as zipfile(s).
    type: object
    additionalProperties: true
    required:
      - type
      - decoder
    properties:
      type:
        type: string
        enum: [ZipfileDecoder]
      decoder:
        title: Parser
        description: Parser to parse the decompressed data from the zipfile(s).
        anyOf:
          - "$ref": "#/definitions/CsvDecoder"
          - "$ref": "#/definitions/GzipDecoder"
          - "$ref": "#/definitions/JsonDecoder"
          - "$ref": "#/definitions/JsonlDecoder"
  ListPartitionRouter:
    title: List Partition Router
    description: A Partition router that specifies a list of attributes where each attribute describes a portion of the complete data set for a stream. During a sync, each value is iterated over and can be used as input to outbound API requests.
    type: object
    required:
      - type
      - cursor_field
      - values
    properties:
      type:
        type: string
        enum: [ListPartitionRouter]
      cursor_field:
        title: Current Partition Value Identifier
        description: While iterating over list values, the name of field used to reference a list value. The partition value can be accessed with string interpolation. e.g. "{{ stream_partition['my_key'] }}" where "my_key" is the value of the cursor_field.
        type: string
        interpolation_context:
          - config
        examples:
          - "section"
          - "{{ config['section_key'] }}"
      values:
        title: Partition Values
        description: The list of attributes being iterated over and used as input for the requests made to the source API.
        anyOf:
          - type: string
          - type: array
            items:
              type: string
        interpolation_context:
          - config
        examples:
          - ["section_a", "section_b", "section_c"]
          - "{{ config['sections'] }}"
      request_option:
        title: Inject Partition Value Into Outgoing HTTP Request
        description: A request option describing where the list value should be injected into and under what field name if applicable.
        "$ref": "#/definitions/RequestOption"
      $parameters:
        type: object
        additionalProperties: true
  MinMaxDatetime:
    title: Min-Max Datetime
    description: Compares the provided date against optional minimum or maximum times. The max_datetime serves as the ceiling and will be returned when datetime exceeds it. The min_datetime serves as the floor.
    type: object
    required:
      - type
      - datetime
    properties:
      type:
        type: string
        enum: [MinMaxDatetime]
      datetime:
        title: Datetime
        description: Datetime value.
        type: string
        interpolation_context:
          - config
        examples:
          - 2021-01-01
          - 2021-01-01T00:00:00Z
          - "{{ config['start_time'] }}"
      datetime_format:
        title: Datetime Format
        description: |
          Format of the datetime value. Defaults to "%Y-%m-%dT%H:%M:%S.%f%z" if left empty. Use placeholders starting with "%" to describe the format the API is using. The following placeholders are available:
            * **%s**: Epoch unix timestamp - `1686218963`
            * **%s_as_float**: Epoch unix timestamp in seconds as float with microsecond precision - `1686218963.123456`
            * **%ms**: Epoch unix timestamp - `1686218963123`
            * **%a**: Weekday (abbreviated) - `Sun`
            * **%A**: Weekday (full) - `Sunday`
            * **%w**: Weekday (decimal) - `0` (Sunday), `6` (Saturday)
            * **%d**: Day of the month (zero-padded) - `01`, `02`, ..., `31`
            * **%b**: Month (abbreviated) - `Jan`
            * **%B**: Month (full) - `January`
            * **%m**: Month (zero-padded) - `01`, `02`, ..., `12`
            * **%y**: Year (without century, zero-padded) - `00`, `01`, ..., `99`
            * **%Y**: Year (with century) - `0001`, `0002`, ..., `9999`
            * **%H**: Hour (24-hour, zero-padded) - `00`, `01`, ..., `23`
            * **%I**: Hour (12-hour, zero-padded) - `01`, `02`, ..., `12`
            * **%p**: AM/PM indicator
            * **%M**: Minute (zero-padded) - `00`, `01`, ..., `59`
            * **%S**: Second (zero-padded) - `00`, `01`, ..., `59`
            * **%f**: Microsecond (zero-padded to 6 digits) - `000000`, `000001`, ..., `999999`
            * **%_ms**: Millisecond (zero-padded to 3 digits) - `000`, `001`, ..., `999`
            * **%z**: UTC offset - `(empty)`, `+0000`, `-04:00`
            * **%Z**: Time zone name - `(empty)`, `UTC`, `GMT`
            * **%j**: Day of the year (zero-padded) - `001`, `002`, ..., `366`
            * **%U**: Week number of the year (Sunday as first day) - `00`, `01`, ..., `53`
            * **%W**: Week number of the year (Monday as first day) - `00`, `01`, ..., `53`
            * **%c**: Date and time representation - `Tue Aug 16 21:30:00 1988`
            * **%x**: Date representation - `08/16/1988`
            * **%X**: Time representation - `21:30:00`
            * **%%**: Literal '%' character

            Some placeholders depend on the locale of the underlying system - in most cases this locale is configured as en/US. For more information see the [Python documentation](https://docs.python.org/3/library/datetime.html#strftime-and-strptime-format-codes).
        type: string
        default: ""
        examples:
          - "%Y-%m-%dT%H:%M:%S.%f%z"
          - "%Y-%m-%d"
          - "%s"
      max_datetime:
        title: Max Datetime
        description: Ceiling applied on the datetime value. Must be formatted with the datetime_format field.
        type: string
        interpolation_context:
          - config
        examples:
          - "2021-01-01T00:00:00Z"
          - "2021-01-01"
      min_datetime:
        title: Min Datetime
        description: Floor applied on the datetime value. Must be formatted with the datetime_format field.
        type: string
        interpolation_context:
          - config
        examples:
          - "2010-01-01T00:00:00Z"
          - "2010-01-01"
      $parameters:
        type: object
        additionalProperties: true
  NoAuth:
    title: No Authentication
    description: Authenticator for requests requiring no authentication.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [NoAuth]
      $parameters:
        type: object
        additionalProperties: true
  NoPagination:
    title: No Pagination
    description: Pagination implementation that never returns a next page.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [NoPagination]
  OAuthConfigSpecification:
    title: OAuth Config Specification
    description: Specification describing how an 'advanced' Auth flow would need to function.
    type: object
    additionalProperties: true
    properties:
      oauth_user_input_from_connector_config_specification:
        title: "OAuth user input"
        description: |-
          OAuth specific blob. This is a Json Schema used to validate Json configurations used as input to OAuth.
          Must be a valid non-nested JSON that refers to properties from ConnectorSpecification.connectionSpecification
          using special annotation 'path_in_connector_config'.
          These are input values the user is entering through the UI to authenticate to the connector, that might also shared
          as inputs for syncing data via the connector.
          Examples:
          if no connector values is shared during oauth flow, oauth_user_input_from_connector_config_specification=[]
          if connector values such as 'app_id' inside the top level are used to generate the API url for the oauth flow,
            oauth_user_input_from_connector_config_specification={
              app_id: {
                type: string
                path_in_connector_config: ['app_id']
              }
            }
          if connector values such as 'info.app_id' nested inside another object are used to generate the API url for the oauth flow,
            oauth_user_input_from_connector_config_specification={
              app_id: {
                type: string
                path_in_connector_config: ['info', 'app_id']
              }
            }
        type: object
        examples:
          - app_id:
              type: string
              path_in_connector_config: ["app_id"]
          - app_id:
              type: string
              path_in_connector_config: ["info", "app_id"]
      oauth_connector_input_specification:
        title: DeclarativeOAuth Connector Specification
        description: |-
          The DeclarativeOAuth specific blob.
          Pertains to the fields defined by the connector relating to the OAuth flow.

          Interpolation capabilities:
          - The variables placeholders are declared as `{{my_var}}`.
          - The nested resolution variables like `{{ {{my_nested_var}} }}` is allowed as well.

          - The allowed interpolation context is:
            + base64Encoder - encode to `base64`, {{ {{my_var_a}}:{{my_var_b}} | base64Encoder }}
            + base64Decorer - decode from `base64` encoded string, {{ {{my_string_variable_or_string_value}} | base64Decoder }}
            + urlEncoder - encode the input string to URL-like format, {{ https://test.host.com/endpoint | urlEncoder}}
            + urlDecorer - decode the input url-encoded string into text format, {{ urlDecoder:https%3A%2F%2Fairbyte.io | urlDecoder}}
            + codeChallengeS256 - get the `codeChallenge` encoded value to provide additional data-provider specific authorisation values, {{ {{state_value}} | codeChallengeS256 }}

          Examples:
            - The TikTok Marketing DeclarativeOAuth spec:
            {
              "oauth_connector_input_specification": {
                "type": "object",
                "additionalProperties": false,
                "properties": {
                    "consent_url": "https://ads.tiktok.com/marketing_api/auth?{{client_id_key}}={{client_id_value}}&{{redirect_uri_key}}={{ {{redirect_uri_value}} | urlEncoder}}&{{state_key}}={{state_value}}",
                    "access_token_url": "https://business-api.tiktok.com/open_api/v1.3/oauth2/access_token/",
                    "access_token_params": {
                        "{{ auth_code_key }}": "{{ auth_code_value }}",
                        "{{ client_id_key }}": "{{ client_id_value }}",
                        "{{ client_secret_key }}": "{{ client_secret_value }}"
                    },
                    "access_token_headers": {
                        "Content-Type": "application/json",
                        "Accept": "application/json"
                    },
                    "extract_output": ["data.access_token"],
                    "client_id_key": "app_id",
                    "client_secret_key": "secret",
                    "auth_code_key": "auth_code"
                }
              }
            }
        type: object
        additionalProperties: true
        required:
          - consent_url
          - access_token_url
        properties:
          consent_url:
            title: Consent URL
            type: string
            description: |-
              The DeclarativeOAuth Specific string URL string template to initiate the authentication.
              The placeholders are replaced during the processing to provide neccessary values.
            examples:
              - https://domain.host.com/marketing_api/auth?{{client_id_key}}={{client_id_value}}&{{redirect_uri_key}}={{{{redirect_uri_value}} | urlEncoder}}&{{state_key}}={{state_value}}
              - https://endpoint.host.com/oauth2/authorize?{{client_id_key}}={{client_id_value}}&{{redirect_uri_key}}={{{{redirect_uri_value}} | urlEncoder}}&{{scope_key}}={{{{scope_value}} | urlEncoder}}&{{state_key}}={{state_value}}&subdomain={{subdomain}}
          scope:
            title: Scopes
            type: string
            description: |-
              The DeclarativeOAuth Specific string of the scopes needed to be grant for authenticated user.
            examples:
              - user:read user:read_orders workspaces:read
          access_token_url:
            title: Access Token URL
            type: string
            description: |-
              The DeclarativeOAuth Specific URL templated string to obtain the `access_token`, `refresh_token` etc.
              The placeholders are replaced during the processing to provide neccessary values.
            examples:
              - https://auth.host.com/oauth2/token?{{client_id_key}}={{client_id_value}}&{{client_secret_key}}={{client_secret_value}}&{{auth_code_key}}={{auth_code_value}}&{{redirect_uri_key}}={{{{redirect_uri_value}} | urlEncoder}}
          access_token_headers:
            title: Access Token Headers
            type: object
            additionalProperties: true
            description: |-
              The DeclarativeOAuth Specific optional headers to inject while exchanging the `auth_code` to `access_token` during `completeOAuthFlow` step.
            examples:
              - {
                  "Authorization": "Basic {{ {{ client_id_value }}:{{ client_secret_value }} | base64Encoder }}",
                }
          access_token_params:
            title: Access Token Query Params (Json Encoded)
            type: object
            additionalProperties: true
            description: |-
              The DeclarativeOAuth Specific optional query parameters to inject while exchanging the `auth_code` to `access_token` during `completeOAuthFlow` step.
              When this property is provided, the query params will be encoded as `Json` and included in the outgoing API request.
            examples:
              - {
                  "{{ auth_code_key }}": "{{ auth_code_value }}",
                  "{{ client_id_key }}": "{{ client_id_value }}",
                  "{{ client_secret_key }}": "{{ client_secret_value }}",
                }
          extract_output:
            title: Extract Output
            type: array
            items:
              type: string
            description: |-
              The DeclarativeOAuth Specific list of strings to indicate which keys should be extracted and returned back to the input config.
            examples:
              - ["access_token", "refresh_token", "other_field"]
          state:
            title: Configurable State Query Param
            type: object
            additionalProperties: true
            required:
              - min
              - max
            description: |-
              The DeclarativeOAuth Specific object to provide the criteria of how the `state` query param should be constructed,
              including length and complexity.
            properties:
              min:
                type: integer
              max:
                type: integer
            examples:
              - { "min": 7, "max": 128 }
          client_id_key:
            title: Client ID Key Override
            type: string
            description: |-
              The DeclarativeOAuth Specific optional override to provide the custom `client_id` key name, if required by data-provider.
            examples:
              - "my_custom_client_id_key_name"
          client_secret_key:
            title: Client Secret Key Override
            type: string
            description: |-
              The DeclarativeOAuth Specific optional override to provide the custom `client_secret` key name, if required by data-provider.
            examples:
              - "my_custom_client_secret_key_name"
          scope_key:
            title: Scopes Key Override
            type: string
            description: |-
              The DeclarativeOAuth Specific optional override to provide the custom `scope` key name, if required by data-provider.
            examples:
              - "my_custom_scope_key_key_name"
          state_key:
            title: State Key Override
            type: string
            description: |-
              The DeclarativeOAuth Specific optional override to provide the custom `state` key name, if required by data-provider.
            examples:
              - "my_custom_state_key_key_name"
          auth_code_key:
            title: Auth Code Key Override
            type: string
            description: |-
              The DeclarativeOAuth Specific optional override to provide the custom `code` key name to something like `auth_code` or `custom_auth_code`, if required by data-provider.
            examples:
              - "my_custom_auth_code_key_name"
          redirect_uri_key:
            title: Redirect URI Key Override
            type: string
            description: |-
              The DeclarativeOAuth Specific optional override to provide the custom `redirect_uri` key name to something like `callback_uri`, if required by data-provider.
            examples:
              - "my_custom_redirect_uri_key_name"
      complete_oauth_output_specification:
        title: "OAuth output specification"
        description: |-
          OAuth specific blob. This is a Json Schema used to validate Json configurations produced by the OAuth flows as they are
          returned by the distant OAuth APIs.
          Must be a valid JSON describing the fields to merge back to `ConnectorSpecification.connectionSpecification`.
          For each field, a special annotation `path_in_connector_config` can be specified to determine where to merge it,
          Examples:
              complete_oauth_output_specification={
                refresh_token: {
                  type: string,
                  path_in_connector_config: ['credentials', 'refresh_token']
                }
              }
        type: object
        additionalProperties: true
        examples:
          - refresh_token:
              type: string,
              path_in_connector_config: ["credentials", "refresh_token"]
      complete_oauth_server_input_specification:
        title: "OAuth input specification"
        description: |-
          OAuth specific blob. This is a Json Schema used to validate Json configurations persisted as Airbyte Server configurations.
          Must be a valid non-nested JSON describing additional fields configured by the Airbyte Instance or Workspace Admins to be used by the
          server when completing an OAuth flow (typically exchanging an auth code for refresh token).
          Examples:
              complete_oauth_server_input_specification={
                client_id: {
                  type: string
                },
                client_secret: {
                  type: string
                }
              }
        type: object
        additionalProperties: true
        examples:
          - client_id:
              type: string
            client_secret:
              type: string
      complete_oauth_server_output_specification:
        title: "OAuth server output specification"
        description: |-
          OAuth specific blob. This is a Json Schema used to validate Json configurations persisted as Airbyte Server configurations that
          also need to be merged back into the connector configuration at runtime.
          This is a subset configuration of `complete_oauth_server_input_specification` that filters fields out to retain only the ones that
          are necessary for the connector to function with OAuth. (some fields could be used during oauth flows but not needed afterwards, therefore
          they would be listed in the `complete_oauth_server_input_specification` but not `complete_oauth_server_output_specification`)
          Must be a valid non-nested JSON describing additional fields configured by the Airbyte Instance or Workspace Admins to be used by the
          connector when using OAuth flow APIs.
          These fields are to be merged back to `ConnectorSpecification.connectionSpecification`.
          For each field, a special annotation `path_in_connector_config` can be specified to determine where to merge it,
          Examples:
                complete_oauth_server_output_specification={
                  client_id: {
                    type: string,
                    path_in_connector_config: ['credentials', 'client_id']
                  },
                  client_secret: {
                    type: string,
                    path_in_connector_config: ['credentials', 'client_secret']
                  }
                }
        type: object
        additionalProperties: true
        examples:
          - client_id:
              type: string,
              path_in_connector_config: ["credentials", "client_id"]
            client_secret:
              type: string,
              path_in_connector_config: ["credentials", "client_secret"]
  OffsetIncrement:
    title: Offset Increment
    description: Pagination strategy that returns the number of records reads so far and returns it as the next page token.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [OffsetIncrement]
      page_size:
        title: Limit
        description: The number of records to include in each pages.
        anyOf:
          - type: integer
          - type: string
        interpolation_context:
          - config
          - response
        examples:
          - 100
          - "{{ config['page_size'] }}"
      inject_on_first_request:
        title: Inject Offset
        description: Using the `offset` with value `0` during the first request
        type: boolean
        default: false
      $parameters:
        type: object
        additionalProperties: true
  PageIncrement:
    title: Page Increment
    description: Pagination strategy that returns the number of pages reads so far and returns it as the next page token.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [PageIncrement]
      page_size:
        title: Page Size
        description: The number of records to include in each pages.
        interpolation_context:
          - config
        anyOf:
          - type: integer
          - type: string
        examples:
          - 100
          - "100"
          - "{{ config['page_size'] }}"
      start_from_page:
        title: Start From Page
        description: Index of the first page to request.
        type: integer
        default: 0
        examples:
          - 0
          - 1
      inject_on_first_request:
        title: Inject Page Number
        description: Using the `page number` with value defined by `start_from_page` during the first request
        type: boolean
        default: false
      $parameters:
        type: object
        additionalProperties: true
  ParentStreamConfig:
    title: Parent Stream Config
    description: Describes how to construct partitions from the records retrieved from the parent stream..
    type: object
    required:
      - type
      - parent_key
      - partition_field
      - stream
    properties:
      type:
        type: string
        enum: [ParentStreamConfig]
      parent_key:
        title: Parent Key
        description: The primary key of records from the parent stream that will be used during the retrieval of records for the current substream. This parent identifier field is typically a characteristic of the child records being extracted from the source API.
        type: string
        examples:
          - "id"
          - "{{ config['parent_record_id'] }}"
      stream:
        title: Parent Stream
        description: Reference to the parent stream.
        "$ref": "#/definitions/DeclarativeStream"
      partition_field:
        title: Current Parent Key Value Identifier
        description: While iterating over parent records during a sync, the parent_key value can be referenced by using this field.
        type: string
        examples:
          - "parent_id"
          - "{{ config['parent_partition_field'] }}"
      request_option:
        title: Request Option
        description: A request option describing where the parent key value should be injected into and under what field name if applicable.
        "$ref": "#/definitions/RequestOption"
      incremental_dependency:
        title: Incremental Dependency
        description: Indicates whether the parent stream should be read incrementally based on updates in the child stream.
        type: boolean
        default: false
      extra_fields:
        title: Extra Fields
        description: Array of field paths to include as additional fields in the stream slice. Each path is an array of strings representing keys to access fields in the respective parent record. Accessible via `stream_slice.extra_fields`. Missing fields are set to `None`.
        interpolation_context:
          - config
        type: array
        items:
          type: array
          items:
            type: string
          description: Defines a field path as an array of strings.
          examples:
            - ["field1"]
            - ["nested", "field2"]
      $parameters:
        type: object
        additionalProperties: true
  PrimaryKey:
    title: Primary Key
    description: The stream field to be used to distinguish unique records. Can either be a single field, an array of fields representing a composite key, or an array of arrays representing a composite key where the fields are nested fields.
    anyOf:
      - type: string
      - type: array
        items:
          type: string
      - type: array
        items:
          type: array
          items:
            type: string
    default: ""
    examples:
      - id
      - ["code", "type"]
  RecordFilter:
    title: Record Filter
    description: Filter applied on a list of records.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [RecordFilter]
      condition:
        description: The predicate to filter a record. Records will be removed if evaluated to False.
        type: string
        default: ""
        interpolation_context:
          - config
          - next_page_token
          - record
          - stream_interval
          - stream_partition
          - stream_slice
        examples:
          - "{{ record['created_at'] >= stream_interval['start_time'] }}"
          - "{{ record.status in ['active', 'expired'] }}"
      $parameters:
        type: object
        additionalProperties: true
  RecordSelector:
    title: Record Selector
    description: Responsible for translating an HTTP response into a list of records by extracting records from the response and optionally filtering records based on a heuristic.
    type: object
    required:
      - type
      - extractor
    properties:
      type:
        type: string
        enum: [RecordSelector]
      extractor:
        anyOf:
          - "$ref": "#/definitions/CustomRecordExtractor"
          - "$ref": "#/definitions/DpathExtractor"
      record_filter:
        title: Record Filter
        description: Responsible for filtering records to be emitted by the Source.
        anyOf:
          - "$ref": "#/definitions/CustomRecordFilter"
          - "$ref": "#/definitions/RecordFilter"
      schema_normalization:
        title: Schema Normalization
        description: Responsible for normalization according to the schema.
        anyOf:
          - "$ref": "#/definitions/SchemaNormalization"
          - "$ref": "#/definitions/CustomSchemaNormalization"
        default: None
      $parameters:
        type: object
        additionalProperties: true
  SchemaNormalization:
    title: Schema Normalization
    description: Responsible for normalization according to the schema.
    type: string
    enum:
      - None
      - Default
    examples:
      - None
      - Default
  RemoveFields:
    title: Remove Fields
    description: A transformation which removes fields from a record. The fields removed are designated using FieldPointers. During transformation, if a field or any of its parents does not exist in the record, no error is thrown.
    type: object
    required:
      - type
      - field_pointers
    properties:
      type:
        type: string
        enum: [RemoveFields]
      condition:
        description: The predicate to filter a property by a property value. Property will be removed if it is empty OR expression is evaluated to True.,
        type: string
        default: ""
        interpolation_context:
          - config
          - property
          - parameters
        examples:
          - "{{ property|string == '' }}"
          - "{{ property is integer }}"
          - "{{ property|length > 5 }}"
          - "{{ property == 'some_string_to_match' }}"
      field_pointers:
        title: Field Paths
        description: Array of paths defining the field to remove. Each item is an array whose field describe the path of a field to remove.
        type: array
        items:
          items:
            type: string
        examples:
          - ["tags"]
          - [["content", "html"], ["content", "plain_text"]]
  RequestPath:
    title: Request Path
    description: Specifies where in the request path a component's value should be inserted.
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [RequestPath]
  RequestOption:
    title: Request Option
    description: Specifies the key field or path and where in the request a component's value should be injected.
    type: object
    required:
      - type
      - inject_into
    properties:
      type:
        type: string
        enum: [RequestOption]
      field_name:
        title: Field Name
        description: Configures which key should be used in the location that the descriptor is being injected into. We hope to eventually deprecate this field in favor of `field_path` for all request_options, but must currently maintain it for backwards compatibility in the Builder.
        type: string
        examples:
          - segment_id
        interpolation_context:
          - config
          - parameters
      field_path:
        title: Field Path
        description: Configures a path to be used for nested structures in JSON body requests (e.g. GraphQL queries)
        type: array
        items:
          type: string
        examples:
          - ["data", "viewer", "id"]
        interpolation_context:
          - config
          - parameters
      inject_into:
        title: Inject Into
        description: Configures where the descriptor should be set on the HTTP requests. Note that request parameters that are already encoded in the URL path will not be duplicated.
        enum:
          - request_parameter
          - header
          - body_data
          - body_json
        examples:
          - request_parameter
          - header
          - body_data
          - body_json
  Schemas:
    title: Schemas
    description: The stream schemas representing the shape of the data emitted by the stream.
    type: object
    additionalProperties: true
  LegacySessionTokenAuthenticator:
    title: Session Token Authenticator
    description: Deprecated - use SessionTokenAuthenticator instead. Authenticator for requests authenticated using session tokens. A session token is a random value generated by a server to identify a specific user for the duration of one interaction session.
    type: object
    required:
      - type
      - header
      - login_url
      - session_token_response_key
      - validate_session_url
    properties:
      type:
        type: string
        enum: [LegacySessionTokenAuthenticator]
      header:
        title: Session Request Header
        description: The name of the session token header that will be injected in the request
        type: string
        examples:
          - "X-Session"
      login_url:
        title: Login Path
        description: Path of the login URL (do not include the base URL)
        type: string
        examples:
          - session
      session_token:
        title: Session Token
        description: Session token to use if using a pre-defined token. Not needed if authenticating with username + password pair
        type: string
        example:
          - "{{ config['session_token'] }}"
      session_token_response_key:
        title: Response Token Response Key
        description: Name of the key of the session token to be extracted from the response
        type: string
        examples:
          - id
      username:
        title: Username
        description: Username used to authenticate and obtain a session token
        type: string
        examples:
          - " {{ config['username'] }}"
      password:
        title: Password
        description: Password used to authenticate and obtain a session token
        type: string
        default: ""
        examples:
          - "{{ config['password'] }}"
          - ""
      validate_session_url:
        title: Validate Session Path
        description: Path of the URL to use to validate that the session token is valid (do not include the base URL)
        type: string
        examples:
          - "user/current"
      $parameters:
        type: object
        additionalProperties: true
  SimpleRetriever:
    description: Retrieves records by synchronously sending requests to fetch records. The retriever acts as an orchestrator between the requester, the record selector, the paginator, and the partition router.
    type: object
    required:
      - type
      - record_selector
      - requester
    properties:
      type:
        type: string
        enum: [SimpleRetriever]
      record_selector:
        description: Component that describes how to extract records from a HTTP response.
        "$ref": "#/definitions/RecordSelector"
      requester:
        description: Requester component that describes how to prepare HTTP requests to send to the source API.
        anyOf:
          - "$ref": "#/definitions/CustomRequester"
          - "$ref": "#/definitions/HttpRequester"
      paginator:
        description: Paginator component that describes how to navigate through the API's pages.
        anyOf:
          - "$ref": "#/definitions/DefaultPaginator"
          - "$ref": "#/definitions/NoPagination"
      ignore_stream_slicer_parameters_on_paginated_requests:
        description: If true, the partition router and incremental request options will be ignored when paginating requests. Request options set directly on the requester will not be ignored.
        type: boolean
        default: false
      partition_router:
        title: Partition Router
        description: PartitionRouter component that describes how to partition the stream, enabling incremental syncs and checkpointing.
        default: []
        anyOf:
          - "$ref": "#/definitions/CustomPartitionRouter"
          - "$ref": "#/definitions/ListPartitionRouter"
          - "$ref": "#/definitions/SubstreamPartitionRouter"
          - type: array
            items:
              anyOf:
                - "$ref": "#/definitions/CustomPartitionRouter"
                - "$ref": "#/definitions/ListPartitionRouter"
                - "$ref": "#/definitions/SubstreamPartitionRouter"
      decoder:
        title: Decoder
        description: Component decoding the response so records can be extracted.
        anyOf:
          - "$ref": "#/definitions/CustomDecoder"
          - "$ref": "#/definitions/CsvDecoder"
          - "$ref": "#/definitions/GzipDecoder"
          - "$ref": "#/definitions/JsonDecoder"
          - "$ref": "#/definitions/JsonlDecoder"
          - "$ref": "#/definitions/IterableDecoder"
          - "$ref": "#/definitions/XmlDecoder"
          - "$ref": "#/definitions/ZipfileDecoder"
      lazy_read_pointer:
        title: Lazy Read Pointer
        description: If set, this will enable lazy reading, using the initial read of parent records to extract child records.
        type: array
        default: [ ]
        items:
          - type: string
        interpolation_context:
          - config
      $parameters:
        type: object
        additionalProperties: true
  GzipDecoder:
    type: object
    required:
      - type
      - decoder
    properties:
      type:
        type: string
        enum: [GzipDecoder]
      decoder:
        anyOf:
          - "$ref": "#/definitions/CsvDecoder"
          - "$ref": "#/definitions/GzipDecoder"
          - "$ref": "#/definitions/JsonDecoder"
          - "$ref": "#/definitions/JsonlDecoder"
  CsvDecoder:
    type: object
    required:
      - type
    properties:
      type:
        type: string
        enum: [CsvDecoder]
      encoding:
        type: string
        default: utf-8
      delimiter:
        type: string
        default: ","
  AsyncJobStatusMap:
    description: Matches the api job status to Async Job Status.
    type: object
    required:
      - running
      - completed
      - failed
      - timeout
    properties:
      type:
        type: string
        enum: [AsyncJobStatusMap]
      running:
        type: array
        items:
          type: string
      completed:
        type: array
        items:
          type: string
      failed:
        type: array
        items:
          type: string
      timeout:
        type: array
        items:
          type: string
  AsyncRetriever:
    description: "[Experimental - We expect the interface to change shortly and we reserve the right to not consider this a breaking change] Retrieves records by Asynchronously sending requests to fetch records. The retriever acts as an orchestrator between the requester, the record selector, the paginator, and the partition router."
    type: object
    required:
      - type
      - record_selector
      - status_mapping
      - creation_requester
      - polling_requester
      - download_requester
      - status_extractor
      - download_target_extractor
    properties:
      type:
        type: string
        enum: [AsyncRetriever]
      record_selector:
        description: Component that describes how to extract records from a HTTP response.
        "$ref": "#/definitions/RecordSelector"
      status_mapping:
        description: Async Job Status to Airbyte CDK Async Job Status mapping.
        anyOf:
          - "$ref": "#/definitions/AsyncJobStatusMap"
      status_extractor:
        description: Responsible for fetching the actual status of the async job.
        anyOf:
          - "$ref": "#/definitions/CustomRecordExtractor"
          - "$ref": "#/definitions/DpathExtractor"
      download_target_extractor:
        description: Responsible for fetching the final result `urls` provided by the completed / finished / ready async job.
        anyOf:
          - "$ref": "#/definitions/CustomRecordExtractor"
          - "$ref": "#/definitions/DpathExtractor"
      download_extractor:
        description: Responsible for fetching the records from provided urls.
        anyOf:
          - "$ref": "#/definitions/CustomRecordExtractor"
          - "$ref": "#/definitions/DpathExtractor"
          - "$ref": "#/definitions/ResponseToFileExtractor"
      creation_requester:
        description: Requester component that describes how to prepare HTTP requests to send to the source API to create the async server-side job.
        anyOf:
          - "$ref": "#/definitions/CustomRequester"
          - "$ref": "#/definitions/HttpRequester"
      polling_requester:
        description: Requester component that describes how to prepare HTTP requests to send to the source API to fetch the status of the running async job.
        anyOf:
          - "$ref": "#/definitions/CustomRequester"
          - "$ref": "#/definitions/HttpRequester"
      download_target_requester:
        description: Requester component that describes how to prepare HTTP requests to send to the source API to extract the url from polling response by the completed async job.
        anyOf:
          - "$ref": "#/definitions/CustomRequester"
          - "$ref": "#/definitions/HttpRequester"
      download_requester:
        description: Requester component that describes how to prepare HTTP requests to send to the source API to download the data provided by the completed async job.
        anyOf:
          - "$ref": "#/definitions/CustomRequester"
          - "$ref": "#/definitions/HttpRequester"
      download_paginator:
        description: Paginator component that describes how to navigate through the API's pages during download.
        anyOf:
          - "$ref": "#/definitions/DefaultPaginator"
          - "$ref": "#/definitions/NoPagination"
      abort_requester:
        description: Requester component that describes how to prepare HTTP requests to send to the source API to abort a job once it is timed out from the source's perspective.
        anyOf:
          - "$ref": "#/definitions/CustomRequester"
          - "$ref": "#/definitions/HttpRequester"
      delete_requester:
        description: Requester component that describes how to prepare HTTP requests to send to the source API to delete a job once the records are extracted.
        anyOf:
          - "$ref": "#/definitions/CustomRequester"
          - "$ref": "#/definitions/HttpRequester"
      partition_router:
        title: Partition Router
        description: PartitionRouter component that describes how to partition the stream, enabling incremental syncs and checkpointing.
        default: []
        anyOf:
          - "$ref": "#/definitions/CustomPartitionRouter"
          - "$ref": "#/definitions/ListPartitionRouter"
          - "$ref": "#/definitions/SubstreamPartitionRouter"
          - type: array
            items:
              anyOf:
                - "$ref": "#/definitions/CustomPartitionRouter"
                - "$ref": "#/definitions/ListPartitionRouter"
                - "$ref": "#/definitions/SubstreamPartitionRouter"
      decoder:
        title: Decoder
        description: Component decoding the response so records can be extracted.
        anyOf:
          - "$ref": "#/definitions/CustomDecoder"
          - "$ref": "#/definitions/CsvDecoder"
          - "$ref": "#/definitions/GzipDecoder"
          - "$ref": "#/definitions/JsonDecoder"
          - "$ref": "#/definitions/JsonlDecoder"
          - "$ref": "#/definitions/IterableDecoder"
          - "$ref": "#/definitions/XmlDecoder"
          - "$ref": "#/definitions/ZipfileDecoder"
      download_decoder:
        title: Download Decoder
        description: Component decoding the download response so records can be extracted.
        anyOf:
          - "$ref": "#/definitions/CustomDecoder"
          - "$ref": "#/definitions/CsvDecoder"
          - "$ref": "#/definitions/GzipDecoder"
          - "$ref": "#/definitions/JsonDecoder"
          - "$ref": "#/definitions/JsonlDecoder"
          - "$ref": "#/definitions/IterableDecoder"
          - "$ref": "#/definitions/XmlDecoder"
          - "$ref": "#/definitions/ZipfileDecoder"
      $parameters:
        type: object
        additionalProperties: true
  Spec:
    title: Spec
    description: A source specification made up of connector metadata and how it can be configured.
    type: object
    required:
      - type
      - connection_specification
    properties:
      type:
        type: string
        enum: [Spec]
      connection_specification:
        title: Connection Specification
        description: A connection specification describing how a the connector can be configured.
        type: object
        additionalProperties: true
      documentation_url:
        title: Documentation URL
        description: URL of the connector's documentation page.
        type: string
        examples:
          - "https://docs.airbyte.com/integrations/sources/dremio"
      advanced_auth:
        title: Advanced Auth
        description: Advanced specification for configuring the authentication flow.
        "$ref": "#/definitions/AuthFlow"
  SubstreamPartitionRouter:
    title: Substream Partition Router
    description: Partition router that is used to retrieve records that have been partitioned according to records from the specified parent streams. An example of a parent stream is automobile brands and the substream would be the various car models associated with each branch.
    type: object
    required:
      - type
      - parent_stream_configs
    properties:
      type:
        type: string
        enum: [SubstreamPartitionRouter]
      parent_stream_configs:
        title: Parent Stream Configs
        description: Specifies which parent streams are being iterated over and how parent records should be used to partition the child stream data set.
        type: array
        items:
          "$ref": "#/definitions/ParentStreamConfig"
      $parameters:
        type: object
        additionalProperties: true
  ValueType:
    title: Value Type
    description: A schema type.
    type: string
    enum:
      - string
      - number
      - integer
      - boolean
  WaitTimeFromHeader:
    title: Wait Time Extracted From Response Header
    description: Extract wait time from a HTTP header in the response.
    type: object
    required:
      - type
      - header
    properties:
      type:
        type: string
        enum: [WaitTimeFromHeader]
      header:
        title: Response Header Name
        description: The name of the response header defining how long to wait before retrying.
        type: string
        interpolation_context:
          - config
        examples:
          - "Retry-After"
      regex:
        title: Extraction Regex
        description: Optional regex to apply on the header to extract its value. The regex should define a capture group defining the wait time.
        type: string
        examples:
          - "([-+]?\\d+)"
      max_waiting_time_in_seconds:
        title: Max Waiting Time in Seconds
        description: Given the value extracted from the header is greater than this value, stop the stream.
        type: number
        examples:
          - 3600
      $parameters:
        type: object
        additionalProperties: true
  WaitUntilTimeFromHeader:
    title: Wait Until Time Defined In Response Header
    description: Extract time at which we can retry the request from response header and wait for the difference between now and that time.
    type: object
    required:
      - type
      - header
    properties:
      type:
        type: string
        enum: [WaitUntilTimeFromHeader]
      header:
        title: Response Header
        description: The name of the response header defining how long to wait before retrying.
        type: string
        interpolation_context:
          - config
        examples:
          - wait_time
      min_wait:
        title: Minimum Wait Time
        description: Minimum time to wait before retrying.
        anyOf:
          - type: number
          - type: string
        interpolation_context:
          - config
        examples:
          - 10
          - "60"
      regex:
        title: Extraction Regex
        description: Optional regex to apply on the header to extract its value. The regex should define a capture group defining the wait time.
        type: string
        interpolation_context:
          - config
        examples:
          - "([-+]?\\d+)"
      $parameters:
        type: object
        additionalProperties: true
  ComponentMappingDefinition:
    title: Component Mapping Definition
    description: (This component is experimental. Use at your own risk.) Specifies a mapping definition to update or add fields in a record or configuration. This allows dynamic mapping of data by interpolating values into the template based on provided contexts.
    type: object
    required:
      - type
      - field_path
      - value
    properties:
      type:
        type: string
        enum: [ComponentMappingDefinition]
      field_path:
        title: Field Path
        description: A list of potentially nested fields indicating the full path where value will be added or updated.
        type: array
        items:
          type: string
        interpolation_context:
          - config
          - components_values
          - stream_slice
          - stream_template_config
        examples:
          - ["data"]
          - ["data", "records"]
          - ["data", 1, "name"]
          - ["data", "{{ components_values.name }}"]
          - ["data", "*", "record"]
          - ["*", "**", "name"]
      value:
        title: Value
        description: The dynamic or static value to assign to the key. Interpolated values can be used to dynamically determine the value during runtime.
        type: string
        interpolation_context:
          - config
          - stream_template_config
          - components_values
          - stream_slice
        examples:
          - "{{ components_values['updates'] }}"
          - "{{ components_values['MetaData']['LastUpdatedTime'] }}"
          - "{{ config['segment_id'] }}"
          - "{{ stream_slice['parent_id'] }}"
          - "{{ stream_slice['extra_fields']['name'] }}"
      value_type:
        title: Value Type
        description: The expected data type of the value. If omitted, the type will be inferred from the value provided.
        "$ref": "#/definitions/ValueType"
      $parameters:
        type: object
        additionalProperties: true
  HttpComponentsResolver:
    type: object
    description: (This component is experimental. Use at your own risk.) Component resolve and populates stream templates with components fetched via an HTTP retriever.
    properties:
      type:
        type: string
        enum: [HttpComponentsResolver]
      retriever:
        title: Retriever
        description: Component used to coordinate how records are extracted across stream slices and request pages.
        anyOf:
          - "$ref": "#/definitions/AsyncRetriever"
          - "$ref": "#/definitions/CustomRetriever"
          - "$ref": "#/definitions/SimpleRetriever"
      components_mapping:
        type: array
        items:
          "$ref": "#/definitions/ComponentMappingDefinition"
      $parameters:
        type: object
        additionalProperties: true
    required:
      - type
      - retriever
      - components_mapping
  StreamConfig:
    title: Stream Config
    description: (This component is experimental. Use at your own risk.) Describes how to get streams config from the source config.
    type: object
    required:
      - type
      - configs_pointer
    properties:
      type:
        type: string
        enum: [StreamConfig]
      configs_pointer:
        title: Configs Pointer
        description: A list of potentially nested fields indicating the full path in source config file where streams configs located.
        type: array
        items:
          type: string
        interpolation_context:
          - parameters
        examples:
          - ["data"]
          - ["data", "streams"]
          - ["data", "{{ parameters.name }}"]
      $parameters:
        type: object
        additionalProperties: true
  ConfigComponentsResolver:
    type: object
    description: (This component is experimental. Use at your own risk.) Resolves and populates stream templates with components fetched from the source config.
    properties:
      type:
        type: string
        enum: [ConfigComponentsResolver]
      stream_config:
        "$ref": "#/definitions/StreamConfig"
      components_mapping:
        type: array
        items:
          "$ref": "#/definitions/ComponentMappingDefinition"
      $parameters:
        type: object
        additionalProperties: true
    required:
      - type
      - stream_config
      - components_mapping
  DynamicDeclarativeStream:
    type: object
    description: (This component is experimental. Use at your own risk.) A component that described how will be created declarative streams based on stream template.
    properties:
      type:
        type: string
        enum: [DynamicDeclarativeStream]
      stream_template:
        title: Stream Template
        description: Reference to the stream template.
        "$ref": "#/definitions/DeclarativeStream"
      components_resolver:
        title: Components Resolver
        description: Component resolve and populates stream templates with components values.
        anyOf:
          - "$ref": "#/definitions/HttpComponentsResolver"
          - "$ref": "#/definitions/ConfigComponentsResolver"
    required:
      - type
      - stream_template
      - components_resolver
interpolation:
  variables:
    - title: config
      description: The connector configuration. The object's keys are the same as the the keys defined in the connection specification.
      type: object
      examples:
        - start_date: 2010-01-01
          api_key: "*****"
    - title: parameters
      description: Additional runtime parameters, to be used for string interpolation. Parameters can be passed down from a parent component to its subcomponents using the $parameters key. This can be used to avoid repetitions.
      type: object
      examples:
        - path: "automations"
          data_export_path: "automations"
          cursor_field: "updated_at"
    - title: headers
      description: The HTTP headers from the last response received from the API. The object's keys are the header names from the response.
      type: object
      examples:
        - Server: nginx
          Date: Mon, 24 Apr 2023 20:17:21 GMT
          Content-Type: application/json
          Content-Length: "420"
          Connection: keep-alive
          referrer-policy: strict-origin-when-cross-origin
          x-content-type-options: nosniff
          x-ratelimit-limit: "600"
          x-ratelimit-remaining: "598"
          x-ratelimit-reset: "39"
    - title: last_record
      description: Last record extracted from the response received from the API.
      type: object
      examples:
        - name: "Test List: 19"
          id: 0236d6d2
          contact_count: 20
          _metadata:
            self: https://api.sendgrid.com/v3/marketing/lists/0236d6d2
    - title: last_page_size
      description: Number of records extracted from the last response received from the API.
      type: object
      examples:
        - 2
    - title: next_page_token
      description: Object describing the token to fetch the next page of records. The object has a single key "next_page_token".
      type: object
      examples:
        - next_page_token: 3
        - next_page_token: https://api.sendgrid.com/v3/marketing/lists/0236d6d2-75d2-42c5-962d-603e0deaf8d1
    - title: record
      description: The record being processed. The object's keys are the same keys as the records produced by the RecordSelector.
      type: object
    - title: response
      description: The body of the last response received from the API. The object's keys are the same keys as the response body's.
      type: object
      examples:
        - result:
            - name: "Test List: 19"
              id: 0236d6d2-75d2-42c5-962d-603e0deaf8d1
              contact_count: 20
              _metadata:
                self: https://api.sendgrid.com/v3/marketing/lists/0236d6d2
          _metadata:
            self: https://api.sendgrid.com/v3/marketing/lists?page_size=1&page_token=
            next: https://api.sendgrid.com/v3/marketing/lists?page_size=1&page_token=0236d6d2
            count: 82
    - title: creation_response
      description: The response received from the creation_requester in the AsyncRetriever component.
      type: object
      examples:
        - id: "1234"
    - title: polling_response
      description: The response received from the polling_requester in the AsyncRetriever component.
      type: object
      examples:
        - id: "1234"
    - title: download_target
      description: The `URL` received from the polling_requester in the AsyncRetriever with jobStatus as `COMPLETED`.
      type: string
      examples:
        - "https://api.sendgrid.com/v3/marketing/lists?page_size=1&page_token=0236d6d2&filename=xxx_yyy_zzz.csv"
    - title: stream_interval
      description: The current stream interval being processed. The keys are defined by the incremental sync component. Default keys are `start_time` and `end_time`.
      type: object
      examples:
        - start_time: "2020-01-01 00:00:00.000+00:00"
          end_time: "2020-01-02 00:00:00.000+00:00"
    - title: stream_partition
      description: The current stream partition being processed. The keys are defined by the partition router component.
      type: object
      examples:
        - survey_id: 1234
        - strategy: DESKTOP
        - survey_id: 1234
          strategy: MOBILE
    - title: stream_slice
      description: This variable is deprecated. Use stream_interval or stream_partition instead.
      type: object
  macros:
    - title: now_utc
      description: Returns the current date and time in the UTC timezone.
      arguments: {}
      return_type: Datetime
      examples:
        - "'{{ now_utc() }}' -> '2021-09-01 00:00:00+00:00'"
        - "'{{ now_utc().strftime('%Y-%m-%d') }}' -> '2021-09-01'"
    - title: today_utc
      description: Returns the current date in UTC timezone. The output is a date object.
      arguments: {}
      return_type: Date
      examples:
        - "'{{ today_utc() }}' -> '2021-09-01'"
        - "'{{ today_utc().strftime('%Y/%m/%d')}}' -> '2021/09/01'"
    - title: timestamp
      description: Converts a number or a string representing a datetime (formatted as ISO8601) to a timestamp. If the input is a number, it is converted to an int. If no timezone is specified, the string is interpreted as UTC.
      arguments:
        datetime: A string formatted as ISO8601 or an integer representing a unix timestamp
      return_type: int
      examples:
        - "'{{ timestamp(1646006400) }}' -> 1646006400"
        - "'{{ timestamp('2022-02-28') }}' -> 1646006400"
        - "'{{ timestamp('2022-02-28T00:00:00Z') }}' -> 1646006400"
        - "'{{ timestamp('2022-02-28 00:00:00Z') }}' -> 1646006400"
        - "'{{ timestamp('2022-02-28T00:00:00-08:00') }}' -> 1646035200"
    - title: max
      description: Returns the largest object of a iterable, or or two or more arguments.
      arguments:
        args: iterable or a sequence of two or more arguments
      return_type: Any
      examples:
        - "'{{ max(2, 3) }}' -> 3"
        - "'{{ max([2, 3]) }}' -> 3"
    - title: day_delta
      description: Returns the datetime of now() + num_days.
      arguments:
        num_days: The number of days to add to now
        format: How to format the output string
      return_type: str
      examples:
        - "'{{ day_delta(1) }}' -> '2021-09-02T00:00:00.000000+0000'"
        - "'{{ day_delta(-1) }}' -> '2021-08-31:00:00.000000+0000'"
        - "'{{ day_delta(25, format='%Y-%m-%d') }}' -> '2021-09-02'"
    - title: duration
      description: Converts an ISO8601 duration to datetime timedelta.
      arguments:
        duration_string: "A string representing an ISO8601 duration. See https://www.digi.com/resources/documentation/digidocs//90001488-13/reference/r_iso_8601_duration_format.htm for more details."
      return_type: datetime.timedelta
      examples:
        - "'{{ duration('P1D') }}' -> '1 day, 0:00:00'"
        - "'{{ duration('P6DT23H') }}' -> '6 days, 23:00:00'"
        - "'{{ (now_utc() - duration('P1D')).strftime('%Y-%m-%dT%H:%M:%SZ') }}' -> '2021-08-31T00:00:00Z'"
    - title: format_datetime
      description: Converts a datetime or a datetime-string to the specified format.
      arguments:
        datetime: The datetime object or a string to convert. If datetime is a string, it must be formatted as ISO8601.
        format: The datetime format.
        input_format: (optional) The datetime format in the case it is an string.
      return_type: str
      examples:
        - "{{ format_datetime(config['start_time'], '%Y-%m-%d') }}"
        - "{{ format_datetime(config['start_date'], '%Y-%m-%dT%H:%M:%S.%fZ') }}"
        - "{{ format_datetime(config['start_date'], '%Y-%m-%dT%H:%M:%S.%fZ', '%a, %d %b %Y %H:%M:%S %z') }}"
    - title: str_to_datetime
      description: Converts a string to a datetime object with UTC timezone.
      arguments:
        s: The string to convert.
      return_type: datetime.datetime
      examples:
        - "{{ str_to_datetime('2022-01-14') }}"
        - "{{ str_to_datetime('2022-01-01 13:45:30') }}"
        - "{{ str_to_datetime('2022-01-01T13:45:30+00:00') }}"
        - "{{ str_to_datetime('2022-01-01T13:45:30.123456Z') }}"
  filters:
    - title: hash
      description: Convert the specified value to a hashed string.
      arguments:
        hash_type: Valid hash type for converts ('md5' as default value).
        salt: An additional value to further protect sensitive data.
      return_type: str
      examples:
        - "{{ 'Test client_secret' | hash() }} -> '3032d57a12f76b61a820e47b9a5a0cbb'"
        - "{{ 'Test client_secret' | hash('md5') }} -> '3032d57a12f76b61a820e47b9a5a0cbb'"
        - "{{ 'Test client_secret' | hash('md5', salt='salt') }} -> '5011a0168579c2d94cbbe1c6ad14327c'"
    - title: base64encode
      description: Convert the specified value to a string in the base64 format.
      arguments: {}
      return_type: str
      examples:
        - "{{ 'Test client_secret' | base64encode }} -> 'VGVzdCBjbGllbnRfc2VjcmV0'"
    - title: base64decode
      description: Decodes the specified base64 format value into a common string.
      arguments: {}
      return_type: str
      examples:
        - "{{ 'ZmFrZSByZWZyZXNoX3Rva2VuIHZhbHVl' | base64decode }} -> 'fake refresh_token value'"
    - title: string
      description: Converts the specified value to a string.
      arguments: {}
      return_type: str
      examples:
        - '{{ 1 | string }} -> "1"'
        - '{{ ["hello", "world" | string }} -> "["hello", "world"]"'
    - title: regex_search
      description: Match the input string against a regular expression and return the first match.
      arguments:
        regex: The regular expression to search for. It must include a capture group.
      return_type: str
      examples:
        - '{{ "goodbye, cruel world" | regex_search("goodbye,\s(.*)$") }} -> "cruel world"'