ci.yml

# Copyright 2021-2026 The OpenSSL Project Authors. All Rights Reserved.
#
# Licensed under the Apache License 2.0 (the "License").  You may not use
# this file except in compliance with the License.  You can obtain a copy
# in the file LICENSE in the source distribution or at
# https://www.openssl.org/source/license.html

name: GitHub CI

on: [pull_request, push]

# for some reason, this does not work:
# variables:
#   BUILDOPTS: "-j4"
#   HARNESS_JOBS: "${HARNESS_JOBS:-4}"

# for some reason, this does not work:
# before_script:
#     - make="make -s"

permissions:
  contents: read

env:
  OSSL_RUN_CI_TESTS: 1

jobs:
  check_update:
    runs-on: ubuntu-latest
    steps:
    - name: install unifdef
      run: |
        sudo apt-get update
        sudo apt-get -yq --no-install-suggests --no-install-recommends --allow-unauthenticated --allow-downgrades --allow-remove-essential --allow-change-held-packages install unifdef
    - uses: actions/checkout@v6
      with:
        fetch-depth: 0
        persist-credentials: false
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-fips && perl configdata.pm --dump
    - name: make build_generated
      run: make -s build_generated
    - name: make update
      run: make update
    - name: git diff
      run: git diff --exit-code

  check_docs:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-fips && perl configdata.pm --dump
    - name: make build_generated
      run: make -s build_generated
    - name: make doc-nits
      run: make doc-nits
    - name: make help
      run: make help
    - name: make md-nits
      run: |
          sudo gem install mdl
          make md-nits

  # This checks that we use ANSI C language syntax and semantics.
  # We are not as strict with libraries, but rather adapt to what's
  # expected to be available in a certain version of each platform.
  check-c99:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: config
      run: CPPFLAGS='-std=c99 -D_XOPEN_SOURCE=1 -D_POSIX_C_SOURCE=200809L' ./config --strict-warnings --banner=Configured enable-sslkeylog no-asm no-secure-memory no-makedepend enable-buildtest-c++ enable-fips enable-lms && perl configdata.pm --dump
    - name: make
      run: make -s -j4

  basic_gcc:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: localegen
      run: sudo locale-gen tr_TR.UTF-8
    - name: fipsvendor
      # Make one fips build use a customized FIPS vendor
      run: echo "FIPS_VENDOR=CI" >> VERSION.dat
    - name: config
      # enable-quic is on by default, but we leave it here to check we're testing the explicit enable somewhere
      run: CC=gcc ./config --strict-warnings --banner=Configured enable-demos enable-h3demo enable-ec_explicit_curves enable-sslkeylog enable-fips enable-quic enable-lms && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: check fipsvendor
      run: |
        util/wrap.pl -fips apps/openssl list -providers | grep 'name: CI FIPS Provider for OpenSSL$'
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@basic-gcc"
        path: artifacts.tar.gz

  basic_clang:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: config
      run: CC=clang ./config --strict-warnings --banner=Configured enable-demos enable-h3demo no-fips && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@basic-clang"
        path: artifacts.tar.gz

  linux-arm64:
    runs-on: ubuntu-24.04-arm
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: config
      run: ./config --strict-warnings enable-demos enable-fips enable-lms enable-ec_nistp_64_gcc_128 enable-md2 enable-rc5 enable-trace
    - name: config dump
      run: ./configdata.pm --dump
    - name: make
      run: make -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@linux-arm64"
        path: artifacts.tar.gz

  gcc-min-version:
    runs-on: ubuntu-latest
    container:
      image: docker.io/gcc:9
    timeout-minutes: 90
    strategy:
      fail-fast: false
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-fips && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: print gcc version
      run: |
        gcc --version
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test

  linux-x86:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: run container
      run: |
        CONTAINER_ID=$(podman run -d -v $(pwd):/mnt -w /mnt --platform=linux/i386 docker.io/i386/debian:13 sleep infinity)
        echo "CONTAINER_ID=$CONTAINER_ID" >> "$GITHUB_ENV"
    - name: install dependencies
      run:
        podman exec -t $CONTAINER_ID sh -c "apt-get update && apt-get install -y gcc perl make"
    - name: config
      run: |
        podman exec -t $CONTAINER_ID sh -c \
          "./config --strict-warnings linux-x86 enable-demos enable-fips enable-lms enable-md2 enable-rc5 enable-trace"
    - name: config dump
      run: |
        podman exec -t $CONTAINER_ID sh -c \
          "./configdata.pm --dump"
    - name: make
      run: |
        podman exec -t $CONTAINER_ID sh -c \
        "make -j"
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        podman exec -t $CONTAINER_ID sh -c \
          "./util/opensslwrap.sh version -c"
    - name: make test
      run: |
        podman exec -t $CONTAINER_ID sh -c \
          ".github/workflows/make-test"
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@linux-x86"
        path: artifacts.tar.gz

  freebsd-x86_64:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: config
      uses: cross-platform-actions/action@46e8d7fb25520a8d6c64fd2b7a1192611da98eda #v0.30.0
      with:
        operating_system: freebsd
        version: "13.4"
        shutdown_vm: false
        run: |
          sudo pkg install -y gcc perl5
          ./config --strict-warnings enable-fips enable-lms enable-ec_nistp_64_gcc_128 enable-md2 enable-rc5 enable-trace
    - name: config dump
      uses: cross-platform-actions/action@46e8d7fb25520a8d6c64fd2b7a1192611da98eda #v0.30.0
      with:
        operating_system: freebsd
        version: "13.4"
        shutdown_vm: false
        run: ./configdata.pm --dump
    - name: make
      uses: cross-platform-actions/action@46e8d7fb25520a8d6c64fd2b7a1192611da98eda #v0.30.0
      with:
        operating_system: freebsd
        version: "13.4"
        shutdown_vm: false
        run: make -j4
    - name: make test
      uses: cross-platform-actions/action@46e8d7fb25520a8d6c64fd2b7a1192611da98eda #v0.30.0
      with:
        operating_system: freebsd
        version: "13.4"
        run: |
          ./util/opensslwrap.sh version -c
          .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@BSD-x86_64"
        path: artifacts.tar.gz

  minimal:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-demos enable-h3demo no-bulk no-pic no-asm no-lms -DOPENSSL_NO_SECURE_MEMORY -DOPENSSL_SMALL_FOOTPRINT && perl configdata.pm --dump
    - name: make
      run: make -j4 # verbose, so no -s here
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@minimal"
        path: artifacts.tar.gz

  no-deprecated:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-demos enable-h3demo no-deprecated enable-fips && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@no-deprecated"
        path: artifacts.tar.gz

  no-shared-ubuntu:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-demos enable-h3demo no-shared no-fips && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@no-shared-ubuntu"
        path: artifacts.tar.gz

  no-shared-macos:
    runs-on: macos-14
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-demos enable-h3demo no-shared no-fips && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        sysctl machdep.cpu
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@no-shared-macos-14"
        path: artifacts.tar.gz

  non-caching:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: Adjust ASLR for sanitizer
      run: |
        sudo cat /proc/sys/vm/mmap_rnd_bits
        sudo sysctl -w vm.mmap_rnd_bits=28
    - name: config
      run: ./config --strict-warnings --banner=Configured --debug enable-demos enable-h3demo enable-asan enable-ubsan no-cached-fetch no-fips no-dtls no-tls1 no-tls1-method no-tls1_1 no-tls1_1-method no-async && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test OPENSSL_TEST_RAND_ORDER=0 TESTS="-test_fuzz* -test_ssl_* -test_sslapi -test_evp -test_cmp_http -test_verify -test_cms -test_store -test_enc -[01][0-9]"
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@non-caching"
        path: artifacts.tar.gz

  address_ub_sanitizer:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: Adjust ASLR for sanitizer
      run: |
        sudo cat /proc/sys/vm/mmap_rnd_bits
        sudo sysctl -w vm.mmap_rnd_bits=28
    - name: config
      run: ./config --strict-warnings --banner=Configured --debug enable-demos enable-h3demo enable-asan enable-ec_explicit_curves enable-ubsan enable-rc5 enable-md2 enable-ec_nistp_64_gcc_128 enable-fips enable-lms && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test OPENSSL_TEST_RAND_ORDER=0
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@address_ub_sanitizer"
        path: artifacts.tar.gz

  fuzz_tests:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: Adjust ASLR for sanitizer
      run: |
        sudo cat /proc/sys/vm/mmap_rnd_bits
        sudo sysctl -w vm.mmap_rnd_bits=28
    - name: config
      run: ./config --strict-warnings --banner=Configured --debug -DPEDANTIC -DFUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION enable-asan enable-ec_explicit_curves enable-ubsan enable-rc5 enable-md2 enable-ec_nistp_64_gcc_128 enable-weak-ssl-ciphers enable-nextprotoneg && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test OPENSSL_TEST_RAND_ORDER=0 TESTS="test_fuzz*"
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@fuzz_tests"
        path: artifacts.tar.gz
        if-no-files-found: ignore

  memory_sanitizer:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: Adjust ASLR for sanitizer
      run: |
        sudo cat /proc/sys/vm/mmap_rnd_bits
        sudo sysctl -w vm.mmap_rnd_bits=28
    - name: config
      # --debug -O1 is to produce a debug build that runs in a reasonable amount of time
      run: CC=clang ./config --strict-warnings --banner=Configured --debug no-shared -O1 -fsanitize=memory -DOSSL_SANITIZE_MEMORY -fno-optimize-sibling-calls enable-rc5 enable-md2 enable-ec_nistp_64_gcc_128 enable-ec_explicit_curves enable-fips enable-lms no-slh-dsa && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test OPENSSL_TEST_RAND_ORDER=0
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@memory_sanitizer"
        path: artifacts.tar.gz

  threads_sanitizer:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: Adjust ASLR for sanitizer
      run: |
        sudo cat /proc/sys/vm/mmap_rnd_bits
        sudo sysctl -w vm.mmap_rnd_bits=28
    - name: config
      run: CC=clang ./config --strict-warnings --banner=Configured no-shared no-fips -g -fsanitize=thread && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test V=1 TESTS="test_lhash test_threads test_internal_provider test_provfetch test_provider test_pbe test_evp_kdf test_pkcs12 test_store test_evp test_quic*"
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@threads_sanitizer"
        path: artifacts.tar.gz

  enable_non-default_options:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: modprobe tls
      run: sudo modprobe tls
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-demos enable-h3demo no-ec enable-ssl-trace enable-zlib enable-zlib-dynamic enable-crypto-mdebug enable-egd enable-ktls enable-fips enable-lms no-threads && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@enable_non-default_options"
        path: artifacts.tar.gz

  full_featured:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: modprobe tls
      run: sudo modprobe tls
    - name: Enable sctp
      run: sudo modprobe sctp
    - name: Enable auth in sctp
      run: sudo sysctl -w net.sctp.auth_enable=1
    - name: install extra config support
      run: sudo apt-get -y install libsctp-dev abigail-tools libzstd-dev zstd
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-demos enable-h3demo enable-ec_explicit_curves enable-ktls enable-fips enable-lms enable-egd enable-ec_nistp_64_gcc_128 enable-md2 enable-rc5 enable-sctp enable-weak-ssl-ciphers enable-trace enable-zlib enable-zstd && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@full_featured"
        path: artifacts.tar.gz

  no-legacy:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: config
      run: ./config --strict-warnings --banner=Configured enable-demos enable-h3demo no-legacy enable-fips enable-lms && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@no-legacy"
        path: artifacts.tar.gz

  legacy:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
    - name: config
      run: ./config --strict-warnings --banner=Configured --debug enable-demos enable-h3demo no-shared enable-crypto-mdebug enable-rc5 enable-md2 enable-weak-ssl-ciphers enable-zlib enable-ec_nistp_64_gcc_128 enable-ec_explicit_curves no-fips && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: make test
      run: .github/workflows/make-test
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@legacy"
        path: artifacts.tar.gz

  # out-of-source-and-install checks multiple things at the same time:
  # - That building, testing and installing works from an out-of-source
  #   build tree
  # - That building, testing and installing works with a read-only source
  #   tree
  out-of-readonly-source-and-install-ubuntu:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        path: ./source
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
      working-directory: ./source
    - name: make source read-only
      run: chmod -R a-w ./source
    - name: create build and install directories
      run: |
        mkdir ./build
        mkdir ./install
    - name: config
      run: |
        ../source/config --banner=Configured enable-demos enable-h3demo enable-fips enable-lms enable-quic enable-acvp-tests --strict-warnings --prefix=$(cd ../install; pwd)
        perl configdata.pm --dump
      working-directory: ./build
    - name: make
      run: make -s -j4
      working-directory: ./build
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
      working-directory: ./build
    - name: make test
      run: ../source/.github/workflows/make-test
      working-directory: ./build
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@out-of-readonly-source-and-install-ubuntu"
        path: build/artifacts.tar.gz
    - name: make install
      run: make install
      working-directory: ./build

  out-of-readonly-source-and-install-macos:
    runs-on: macos-15
    steps:
    - uses: actions/checkout@v6
      with:
        path: ./source
        persist-credentials: false
    - name: checkout fuzz/corpora submodule
      run: git submodule update --init --depth 1 fuzz/corpora
      working-directory: ./source
    - name: make source read-only
      run: chmod -R a-w ./source
    - name: create build and install directories
      run: |
        mkdir ./build
        mkdir ./install
    - name: config
      run: |
        ../source/config --banner=Configured enable-fips enable-lms enable-demos enable-h3demo enable-quic enable-acvp-tests --strict-warnings --prefix=$(cd ../install; pwd)
        perl configdata.pm --dump
      working-directory: ./build
    - name: make
      run: make -s -j4
      working-directory: ./build
    - name: get cpu info
      run: |
        sysctl machdep.cpu
        ./util/opensslwrap.sh version -c
      working-directory: ./build
    - name: make test
      run: ../source/.github/workflows/make-test
      working-directory: ./build
    - name: save artifacts
      if: success() || failure()
      uses: actions/upload-artifact@v5
      with:
        name: "ci@out-of-readonly-source-and-install-macos-15"
        path: build/artifacts.tar.gz
    - name: make install
      run: make install
      working-directory: ./build

  external-tests-misc:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        submodules: recursive
        persist-credentials: false
    - name: package installs
      run: |
        sudo apt-get update
        sudo apt-get -yq install bison gettext keyutils ldap-utils libldap2-dev libkeyutils-dev python3 python3-paste python3-pyrad slapd tcsh python3-virtualenv virtualenv python3-kdcproxy gdb libtls-dev wget gpg
    - name: install cpanm and Test2::V0 for gost_engine testing
      uses: perl-actions/install-with-cpanm@10d60f00b4073f484fc29d45bfbe2f776397ab3d # v1.7
      with:
        install: Test2::V0
    - name: setup hostname workaround
      run: sudo hostname localhost
    - name: config
      run: ./config --strict-warnings --banner=Configured --debug enable-rc5 enable-md2 enable-weak-ssl-ciphers enable-zlib enable-ec_nistp_64_gcc_128 enable-external-tests no-fips && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - uses: dtolnay/rust-toolchain@0f44b27771c32bda9f458f75a1e241b09791b331
      with:
        toolchain: stable
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: test external gost-engine
      run: make test TESTS="test_external_gost_engine"
    - name: test external krb5
      run: make test TESTS="test_external_krb5"
    - name: test external tlsfuzzer
      run: make test TESTS="test_external_tlsfuzzer"
    - name: test external Cloudflare quiche
      run: make test TESTS="test_external_cf_quiche" VERBOSE=1
    - name: test external rpki client
      run: make test TESTS="test_external_rpki-client-portable"
    - name: test ability to produce debuginfo files
      run: |
        make debuginfo
        gdb < <(echo -e "file ./libcrypto.so.4\nquit") > ./results
        grep -q "Reading symbols from.*libcrypto\.so\.4\.debug" results

  external-tests-oqs-provider:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        submodules: recursive
        persist-credentials: false
    - name: config
      run: ./config --strict-warnings --banner=Configured --debug enable-external-tests && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: test external oqs-provider
      run: make test TESTS="test_external_oqsprovider"

  external-tests-pkcs11-provider:
    runs-on: ubuntu-latest
    container: fedora:latest
    steps:
    - name: package installs
      run: |
        dnf install -y perl-FindBin perl-IPC-Cmd perl-File-Compare perl-File-Copy perl-Test-Simple perl-Test-Harness python3 make g++ perl git meson opensc expect kryoptic
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: checkout fuzz/corpora and pkcs11-provider submodule
      run: |
        git config --global --add safe.directory "$GITHUB_WORKSPACE"
        git submodule update --init --depth 1 fuzz/corpora
        git submodule update --init --depth 1 pkcs11-provider
    - name: config
      run: ./config --strict-warnings --banner=Configured --debug enable-external-tests no-fips && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    # Run all tests except external tests to make sure they work fine on Fedora because
    # this is the only job running on Fedora, only then execute pkcs11-provider external
    # test.
    - name: test (except external tests)
      run: make test TESTS="-test_external_*"
    - name: test external pkcs11-provider
      run: make test TESTS="test_external_pkcs11_provider" VERBOSE=1
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c

  external-tests-pyca:
    runs-on: ubuntu-latest
    strategy:
      matrix:
        PYTHON:
          - 3.9
    steps:
    - uses: actions/checkout@v6
      with:
        submodules: recursive
        persist-credentials: false
    - name: package installs
      run: |
        sudo apt-get update
        sudo apt-get -yq install pkgconf libssl-dev
    - name: Configure OpenSSL
      run: ./config --strict-warnings --banner=Configured --debug enable-external-tests && perl configdata.pm --dump
    - name: make
      run: make -s -j4
    - name: Setup Python
      uses: actions/setup-python@v6.0.0
      with:
        python-version: ${{ matrix.PYTHON }}
    - uses: dtolnay/rust-toolchain@0f44b27771c32bda9f458f75a1e241b09791b331
      with:
        toolchain: stable
    - name: get cpu info
      run: |
        cat /proc/cpuinfo
        ./util/opensslwrap.sh version -c
    - name: test external pyca
      run: make test TESTS="test_external_pyca" VERBOSE=1

  external-test-bssl:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: Configure OpenSSL
      run: ./config enable-external-tests
    - name: Build OpenSSL
      run: make -s -j4
    - name: Clone BoringSSL 0.20260211.0
      run: git clone --depth 1 --branch 0.20260211.0  https://boringssl.googlesource.com/boringssl
    - name: Configure and Build BoringSSL
      run: |
        cd boringssl
        mkdir build
        cd build
        cmake -DCMAKE_INSTALL_PREFIX=../../boringssl/.local ..
        make -s -j4
        make install
        cd ../..
    - name: Test ECH with BoringSSL
      run: make test TESTS='test_external_ech_bssl' V=1

  external-test-nss:
    runs-on: ubuntu-latest
    steps:
    - uses: actions/checkout@v6
      with:
        persist-credentials: false
    - name: Configure OpenSSL
      run: ./config enable-external-tests
    - name: Build OpenSSL
      run: make -s -j4
    - name: Clone and Build NSS
      run: |
        mkdir nss
        cd nss
        git clone --depth 1 --branch NSS_3_112_3_RTM https://github.com/nss-dev/nss.git
        hg clone https://hg.mozilla.org/projects/nspr -r NSPR_4_36_BRANCH
        cd nss
        USE_64=1 make nss_build_all
        USE_64=1 make install
        cd ../..
    - name: Test ECH with NSS
      run: make test TESTS='test_external_ech_nss' V=1