diff --git a/docs/projects/adrv9026/index.rst b/docs/projects/adrv9026/index.rst
index 8f12d3cfea1..36e49632774 100644
--- a/docs/projects/adrv9026/index.rst
+++ b/docs/projects/adrv9026/index.rst
@@ -17,6 +17,13 @@ Supported boards
 
 - :adi:`ADRV9026/ADRV9029 <EVAL-ADRV9026>`
 
+Supported devices
+-------------------------------------------------------------------------------
+
+- :adi:`ADRV9026`
+- :adi:`ADRV9029`
+- ADRV9025 (OBSOLETE)
+
 Supported carriers
 -------------------------------------------------------------------------------
 
@@ -30,12 +37,12 @@ Supported carriers
    * - :adi:`ADRV9026/ADRV9029 <EVAL-ADRV9026>`
      - :intel:`A10SoC <content/www/us/en/products/details/fpga/development-kits/arria/10-sx.html>`
      - FMCA
-   * -
-     - :xilinx:`ZCU102`
-     - FMC HPC1
    * -
      - :xilinx:`VCU118`
      - FMCP
+   * -
+     - :xilinx:`ZCU102`
+     - FMC HPC1
 
 Block design
 -------------------------------------------------------------------------------
diff --git a/projects/adrv9026/README.md b/projects/adrv9026/README.md
new file mode 100644
index 00000000000..89dcd44bf79
--- /dev/null
+++ b/projects/adrv9026/README.md
@@ -0,0 +1,16 @@
+# ADRV9026 HDL Project
+
+- Evaluation board product page: [EVAL-ADRV9026/ADRV9029](https://www.analog.com/eval-adrv9026)
+- System documentation: https://wiki.analog.com/resources/eval/user-guides/adrv9026/quickstart
+- HDL project documentation: https://analogdevicesinc.github.io/hdl/projects/adrv9026/index.html
+
+## Supported parts
+
+| Part name                                   | Description                                               |
+|---------------------------------------------|-----------------------------------------------------------|
+| [ADRV9026](https://www.analog.com/ADRV9026) | Integrated, Quad RF Transceiver with Observation Path     |
+| [ADRV9029](https://www.analog.com/ADRV9029) | Integrated, Quad RF Transceiver with Observation Path     |
+
+## Building the project
+
+Please enter the folder for the FPGA carrier you want to use and read the README.md.
\ No newline at end of file
diff --git a/projects/adrv9026/a10soc/README.md b/projects/adrv9026/a10soc/README.md
new file mode 100644
index 00000000000..9014ce96a5b
--- /dev/null
+++ b/projects/adrv9026/a10soc/README.md
@@ -0,0 +1,10 @@
+# ADRV9026/A10SOC HDL Project
+
+## Building the project
+
+```
+cd projects/adrv9026/a10soc
+make
+```
+
+Corresponding device tree: [socfpga_arria10_socdk_adrv9025.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_socdk_adrv9025.dts)
\ No newline at end of file
diff --git a/projects/adrv9026/vcu118/README.md b/projects/adrv9026/vcu118/README.md
new file mode 100644
index 00000000000..56557248a3c
--- /dev/null
+++ b/projects/adrv9026/vcu118/README.md
@@ -0,0 +1,23 @@
+# ADRV9026/VCU118 HDL Project
+
+## Building the project
+
+```
+cd projects/adrv9026/vcu118
+make
+```
+
+All of the RX/TX link modes can be found in the [ADRV9026 data sheet](https://www.analog.com/media/radioverse-adrv9026/adrv9026.pdf). We offer support for only a few of them.
+
+The overwritable parameters from the environment:
+
+- JESD_MODE - link layer encoder mode used;
+  - 8B10B - 8b10b link layer defined in JESD204B, uses ADI IP as Physical layer
+  - 64B66B - 64b66b link layer defined in JESD204C, uses Xilinx IP as Physical layer
+- [RX/TX]_LANE_RATE - lane rate of the [RX/TX] link (RX: MxFE to FPGA/TX: FPGA to MxFE)
+- [RX/TX]_NUM_LINKS - [RX/TX] number of links, which matches the number of MxFE devices
+- [RX/TX]_JESD_M - [RX/TX] number of converters per link
+- [RX/TX]_JESD_L - [RX/TX] number of lanes per link
+- [RX/TX]_JESD_S - [RX/TX] number of samples per converter per frame
+
+Corresponding device tree: [vcu118_adrv9025.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/microblaze/boot/dts/vcu118_adrv9025.dts)
\ No newline at end of file
diff --git a/projects/adrv9026/zcu102/README.md b/projects/adrv9026/zcu102/README.md
new file mode 100644
index 00000000000..8fe20cee952
--- /dev/null
+++ b/projects/adrv9026/zcu102/README.md
@@ -0,0 +1,10 @@
+# ADRV9026/ZCU102 HDL Project
+
+## Building the project
+
+```
+cd projects/adrv9026/zcu102
+make
+```
+
+Corresponding device tree: [zynqmp-zcu102-rev10-adrv9025.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-adrv9025.dts)
\ No newline at end of file