You can find the .stl files under the print/ directory at the root of this repo.
All the parts are printed in standard PLA with 15% infill, except for foot_bottom_tpu.stl, which is to be printed in TPU at 40% infill.
- foot_top.stl x2
- foot_side.stl x2
- foot_bottom_pla.stl x2
- foot_bottom_tpu.stl x2 (TPU)
- knee_to_ankle_left_sheet.stl x4
- knee_to_ankle_right_sheet.stl x4
- leg_spacer.stl x4
- left_roll_to_pitch.stl x1
- right_roll_to_pitch.stl x1
- roll_motor_bottom.stl x2
- roll_motor_top.stl x2
- trunk_bottom.stl x1
- trunk_top.stl x1
- neck_left_sheet.stl x1
- neck_right_sheet.stl x1
- head_pitch_to_yaw.stl x1
- head_yaw_to_roll.stl x1
- head_roll_mount.stl x1
- head.stl x1
- head_bot_sheet.stl x1
- left_antenna_holder.stl x1
- right_antenna_holder.stl x1
- left_cache.stl x1
- right_cache.stl x1
- body_front.stl x1
- body_middle_bottom.stl x1
- body_middle_top.stl x1
- body_back.stl x1
- battery_pack_lid.stl x1
- bulb.stl x1
- flash_light_module.stl x1
- flash_reflector_interface.stl x1
- left_eye.stl x1
- right_eye.stl x1
- speaker_interface.stl x1
- speaker_stand.stl x1