Skip to content

README.md

Latest commit

 

History

History
29 lines (18 loc) · 1.19 KB

README.md

File metadata and controls

29 lines (18 loc) · 1.19 KB

remoteocd

Flexible firmware flashing for the Arduino UNO Q Microcontroller.

remoteocd is a specialized utility designed to manage firmware deployment for the Arduino UNO Q board. This tool acts as a versatile wrapper for OpenOCD (Open On-Chip Debugger), allowing you to flash a binary onto the MCU using one of three transparently handled modes:

  • Local, by flashing from the UNO Q's MPU (Linux) environment.
  • ADB over USB.
  • SSH over a remote pc.

remoteocd is part of the arduino:zephyr:unoq platform.

Uploading with remoteocd

Uploading the compiled binary to the microcontroller is handled by remoteocd. Instead of relying on hard-coded flash commands, it accepts an OpenOCD configuration file. This allows you to tailor the upload script to specific debugging or flashing requirements. remoteocd is automatically installed as a tool dependency of the Arduino UNO Q Board platform.

To upload your compiled sketch, use the following Arduino CLI command:

arduino-cli compile -b arduino:zephyr:unoq

arduino-cli upload -b arduino:zephyr:unoq

License

This project is licensed under the GPL3 license. See the LICENSE file for details.