Invert Shelly Dimmer , currently 100% = OFF

[j1gg3]

Hi,
I am using a Shelly Dimmer Plus 0-10V and having a Mean Well Power Supply behind connected to control the output power. Currently it's configured by having the need to have the dimmer all time turned on or at 100% to turn of the Mean Well Power supply and 1% or OFF means to gain full power out of my Mean Well Power Supply.

Any chance to change that behaviour? I'd like to have OFF = Power Supply off and 100% = Max Power out.
I god these dimmers already flashed with tasmota so had no chance to check whether this behaviour is same with stock shelly fw.

[sfromis]

I've got no experience with the device, but I'd try if it helps reconfiguring the PWM pin to be PWM_i instead, for inverted.

[j1gg3]

Amazing, this is exactly what I was looking for. Thank you!

[Djulien92]

Hi, where do I reconfigure this ? Do I need to script this?

[sfromis]

Assuming that the device is configured via a template (like the recommended one), you can change pins in the web UI, Configure/Template. Otherwise in Configure/Module.