boards/youyeetoo-yy3588: name audio outputs on pipewire too

The udev SOUND_DESCRIPTION rule only renames cards on PulseAudio releases,
PipeWire (trixie, resolute and later) ignores it, so every output showed
as generic Built-in Audio. Add a WirePlumber 0.5 drop-in that sets
device.description per card, keeping the udev rule for PulseAudio. Verified
on resolute with WirePlumber 0.5.13.

Signed-off-by: SuperKali <hello@superkali.me>

Author: SuperKali

config/boards/youyeetoo-yy3588.conf

@@ -47,11 +47,35 @@ function pre_config_uboot_target__youyeetoo_yy3588_patch_rockchip_common_boot_or
 function post_family_tweaks__youyeetoo_yy3588_naming_audios() {
 	display_alert "$BOARD" "Renaming Youyeetoo YY3588 audios" "info"
 
+	# PulseAudio releases (bookworm, jammy, noble): udev SOUND_DESCRIPTION maps to PA_PROP_DEVICE_DESCRIPTION.
 	mkdir -p $SDCARD/etc/udev/rules.d/
 	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI0 Audio"' > $SDCARD/etc/udev/rules.d/90-naming-audios.rules
 	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmiin-sound", ENV{SOUND_DESCRIPTION}="HDMI-In Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
 	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-dp0-sound", ENV{SOUND_DESCRIPTION}="DP0 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
 	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-analog-sound", ENV{SOUND_DESCRIPTION}="ES8388 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
 
+	# PipeWire releases (trixie, forky, sid, resolute+): WirePlumber 0.5 ignores udev, set device.description directly.
+	mkdir -p $SDCARD/etc/wireplumber/wireplumber.conf.d/
+	cat > $SDCARD/etc/wireplumber/wireplumber.conf.d/51-youyeetoo-yy3588-audio-names.conf <<-'WPCONF'
+		monitor.alsa.rules = [
+		  {
+		    matches = [ { device.name = "alsa_card.platform-analog-sound" } ]
+		    actions = { update-props = { device.description = "ES8388 Audio" } }
+		  }
+		  {
+		    matches = [ { device.name = "alsa_card.platform-hdmi0-sound" } ]
+		    actions = { update-props = { device.description = "HDMI0 Audio" } }
+		  }
+		  {
+		    matches = [ { device.name = "alsa_card.platform-dp0-sound" } ]
+		    actions = { update-props = { device.description = "DP0 Audio" } }
+		  }
+		  {
+		    matches = [ { device.name = "alsa_card.platform-hdmiin-sound" } ]
+		    actions = { update-props = { device.description = "HDMI-In Audio" } }
+		  }
+		]
+	WPCONF
+
 	return 0
 }