Artisan not reading ET and BT on Bideli 3kg Roaster

[gjstout]

This is my first time setting up Artisan. I downloaded drivers and set up according to what the manufacturer instructed but I can't get any temp readings. Any help or advice is appreciated! I'm using Mac OS 14.7.6 currently.

[Terracotta-6]

The usual problem lies in the inaccurate selection of the COM port occupied by the 485 to USB adapter.
You should see your devices port while connected on doing a

ls -l /dev/cu*

#1857

[gjstout]

Checked that, it all matches up but still nothing.

[poundy]

why not tell us what the manufacturer instructed you to do, tell us what your list of serial ports are, and send your configuration file for review?

[gjstout]

I'm starting to suspect it has to do with only having usb-c ports and that it's a MacBook Air, but here is what I'm set up as in artisan. Could have quite possibly entered something wrong.

[Terracotta-6]

Try using the universal Modbus method, check the configuration according to the Fuji temperature control instrument manual to ensure it is correct.

TN5A2227b-E_tfjretsyli.pdf
The artisan has specially developed settings for Fuji. There is no problem with the settings. They need to be correctly set on the Fuji temperature control instrument in order to use "the problem of the equipment supplier".
The Fuji temperature controller, the special mode for artisan use, and the general MODBUS protocol have all been tested and proven to be functional. However, correct configuration is required at the temperature control instrument end.

[gjstout]

That worked! I appreciate the help!