Fan and Power setting no longer displaying on roast graph

[CoffeeDawg03]

I am having an issue that is driving me crazy. My fan and power settings have suddenly stopped displaying on my roast profile. The buttons are still there but when I click them the setting is not displaying on my graph. If I load past roast profiles, they aren’t displaying either. I have no idea what has possibly changed. Any help is greatly appreciated.

Note: My markers setting is usually set to ‘Combo’. However now my power and fan setting only display if ‘Flag’ or ‘Bar’ setting is selected.

[MAKOMO]

https://www.youtube.com/watch?v=QRAzYkmGYVw&t=320s

[CoffeeDawg03]

Thank you. This actually was very helpful. Somehow my step value was set to 0 in the Axes menu. I have no idea how that happened because I don’t remember ever changing that. Nevertheless problem solved.

[poundy]

You really need to learn how to save your settings, and compare "then" to now. That will give you a good indication on what you have changed....

[beanoccio]

I won't be doing the next roast for a few days.
I'll keep a close eye on it. However, the current continuous build might be error-free again.

[MAKOMO]

Nothing change w.r.t. the calculation/display of TP for more than a year. There are cases where TP cannot be determined reliably, therefore I asked for the problematic profile and it is possible to disable the TP annotation all together, therefore I asked for your settings to rule this out.

[MAKOMO]

Anyhow, this thread is not about the TP, but about missing/lost Fan/Power lines. Hope I receive some data on this to be able to investigate.

[CoffeeDawg03]

I’ll try to get that data this evening.

[CoffeeDawg03]

Problem solved. See my response to the posted YT video.