-
|
Hello Please help with event buttons. The buttons have modbus commands configured and work fine when controlled manually. When I load the background, events don't play. Playback aid is on, and event playback is enabled. When the background loads, only sliders play. Event playback aid and messages about the event being recorded play, but there is no modbus command. If I click this event manually, the modbus command is present. Events don't work on various PCs and with various modbus devices. Resetting the configuration and reinstalling Artisan doesn't help. |
Beta Was this translation helpful? Give feedback.
Replies: 6 comments 4 replies
-
Disable Ramp
Application Scenarios of "Ramp" in Pure Hot-air "Floating-air" Coffee Roasters.
|
Beta Was this translation helpful? Give feedback.
-
There's an error when playing the background. |
Beta Was this translation helpful? Give feedback.
-
|
pid control enable (I tried enabling PID before, but to no avail.) Video of the relay in action: When I press the relay buttons, the relay is on. |
Beta Was this translation helpful? Give feedback.
-
|
Event buttons (actions) are not replayed by Artisan. What is replayed by Artisan are events. If an event is replayed the corresponding slider (if active) is moved. If that slider has an attached slider action that slider action is issued on replay. Your settings define buttons of event type #2 "Luftklappe", but the corresponding slider is disabled. However, the slider #3 "Brenner" is enabled. Maybe it could help if you would explain what exactly you want to achieve. |
Beta Was this translation helpful? Give feedback.
-
|
I use it in this way.
|
Beta Was this translation helpful? Give feedback.
-
|
Thanks to everyone who helped. Your advice was helpful, and I was able to set up button events.
|
Beta Was this translation helpful? Give feedback.










There's an error when playing the background.
There's no error when roasting again.