Air settings reset to an abitary value (Giesen W6A x Artisan 3.4)

[adrianhermet-ctrl]

Hi I'm new to the forum.

I'm using a Giesen W6a MY 2014 with touchscreen. Artisan is working proberly but i have some problems.

I have the problem, that Artisan resets my Air pressur values about 30 sek after set. The roaster ist not accapting this and stays at the previous setting.

I tried resetting the roaster settings in artisan but than, i cant read the temperatures anymore.

But when i replay a roast prfofile the air pressur values suddenly are accepted by the roaster and air values are complete nonsense in some roastst.

link to my settings: https://drive.google.com/file/d/1jjH7Ypv6UekrTn2GSPAGXFaykU6-LcVr/view?usp=sharing

[MAKOMO]

Sorry for the late reply. Seems like the issue is that you applied some modification to the original setting and thus the min/max limits of the sliders do not correspond any longer to those of the quantifiers.

You have defined the range of your air slider as 80 - 180, but the one of the air quantifier still at the original 80 - 350. Change that range of the air quantifier (menu Config >> Events, tab Quantifiers) to 80-180 such that the quantification result is correct.

Hope this helps!