Loxone Commands (LX) not working

[Clubsport]

What happened?

Hey guys,

it seems that the Loxone-specific commands (&LX=) are not working.
Installed the "normal" 0.13.3 from @Aircoookie and it works flawless.
Changed back to SR-013.3 and not reaction at all.

Can you please have a look on this? :)

To Reproduce Bug

Changed between 0.13.3 and SR-0.13.3

Expected Behavior

http-commands with direct input from Loxone home automation.

Install Method

From SoundReactive Release Page https://github.com/atuline/WLED/releases

What version of Soundreactive WLED?

SR WLED 0.13.3

Which microcontroller/board are you seeing the problem on?

ESP32

Relevant log/trace output

No response

Anything else?

No response

Code of Conduct

• I agree to follow this project's Code of Conduct

[softhack007]

Hi,
Loxone is not included in our standard SR build (long story - has to do with memory and cpu ressources...).

WLED/platformio.ini

Line 467 in cdeecce

build_flags = ${common.build_flags_esp32} -D WLED_RELEASE_NAME=ESP32 -D WLED_DISABLE_MQTT -D WLED_DISABLE_LOXONE

To get Loxone support in SR WLED, you need to build your own SR firmware -
see https://github.com/atuline/WLED/wiki/Installing-and-Compiling#getting-started .

Unfortunately, we missed to add a message in Sync Settings page, like it was done for other disabled functions. The next SR release will show "This firmware build does not include Loxone Lighting support." when Loxone was not enabled at compile time.

[Clubsport]

Ah okay, didn't found any hint on that. ;)
So I have to try to make my own one.... I will give it a try! :)

[softhack007]

seems this is a problem in upstream WLED
see wled#2957 and wled@e8a7802