First Installation

[medapayne]

Good evening everyone

I just installed the HyperHDR image on a PI 4 with "Pi Imager" using this image: "RaspberryPiOS-P010-hdr-os-image-bookworm-aarch64.img.xz"
Everything went well. I can connect to the interface, but I get this error message.

Some errors found in the log

The last one:
2024-10-22 15:13:44 [SERVICE_mDNS] Failed to open any client sockets
Some errors are transient (e.g. with the auto-reconnect LED enabled) and can be ignored, others may indicate serious system configuration or operation errors.
Check the logs and look for errors (in red):Logs

I should point out that I don't have anything connected to the Pi at the moment: no LEDs, no grabber, no splitter. I wanted to check if the HyperHDR installation was OK.

Second question: I can't find in the interface how to turn off the HyperHDR system, can you guide me please

Thanks in advance for your answers.

[awawa-dev]

Hi
Ignore this error: at the time the network was down (after rpi startup it takes some time to establish wifi connection), later it should establish mdns socket. Second: just power off the system if you have read-only OS: https://github.com/awawa-dev/HyperHDR/wiki/Raspberry-Pi-OS-read-only-mode or disable HyperHDR service.

[medapayne]

Thanks for the answers.
For the second question, I wanted to know if you could shut down the system directly from the HyperHDR interface.
From this menu.

and

Is there a JSON command to shut down the system please?

[awawa-dev]

No

[medapayne]

Merci pour vos réponses. Pour la deuxième question, je voulais savoir s'il était possible d'arrêter le système directement depuis l'interface HyperHDR. Depuis ce menu.

et

and for this please