ThunderBorg.py

#!/usr/bin/env python
# coding: latin-1
"""
This module is designed to communicate with the ThunderBorg

Use by creating an instance of the class, call the Init function, then command as desired, e.g.
import ThunderBorg
TB = ThunderBorg.ThunderBorg()
TB.Init()
# User code here, use TB to control the board

Multiple boards can be used when configured with different I²C addresses by creating multiple instances, e.g.
import ThunderBorg
TB1 = ThunderBorg.ThunderBorg()
TB2 = ThunderBorg.ThunderBorg()
TB1.i2cAddress = 0x15
TB2.i2cAddress = 0x1516
TB1.Init()
TB2.Init()
# User code here, use TB1 and TB2 to control each board separately

For explanations of the functions available call the Help function, e.g.
import ThunderBorg
TB = ThunderBorg.ThunderBorg()
TB.Help()
See the website at www.piborg.org/thunderborg for more details
"""

# Import the libraries we need
import smbus
import types
import time

# Constant values
PWM_MAX                     = 255
I2C_MAX_LEN                 = 6
VOLTAGE_PIN_MAX             = 36.3  # Maximum voltage from the analog voltage monitoring pin
VOLTAGE_PIN_CORRECTION      = 0.0   # Correction value for the analog voltage monitoring pin
BATTERY_MIN_DEFAULT         = 7.0   # Default minimum battery monitoring voltage
BATTERY_MAX_DEFAULT         = 35.0  # Default maximum battery monitoring voltage

I2C_ID_THUNDERBORG          = 0x15

COMMAND_SET_LED1            = 1     # Set the colour of the ThunderBorg LED
COMMAND_GET_LED1            = 2     # Get the colour of the ThunderBorg LED
COMMAND_SET_LED2            = 3     # Set the colour of the ThunderBorg Lid LED
COMMAND_GET_LED2            = 4     # Get the colour of the ThunderBorg Lid LED
COMMAND_SET_LEDS            = 5     # Set the colour of both the LEDs
COMMAND_SET_LED_BATT_MON    = 6     # Set the colour of both LEDs to show the current battery level
COMMAND_GET_LED_BATT_MON    = 7     # Get the state of showing the current battery level via the LEDs
COMMAND_SET_A_FWD           = 8     # Set motor A PWM rate in a forwards direction
COMMAND_SET_A_REV           = 9     # Set motor A PWM rate in a reverse direction
COMMAND_GET_A               = 10    # Get motor A direction and PWM rate
COMMAND_SET_B_FWD           = 11    # Set motor B PWM rate in a forwards direction
COMMAND_SET_B_REV           = 12    # Set motor B PWM rate in a reverse direction
COMMAND_GET_B               = 13    # Get motor B direction and PWM rate
COMMAND_ALL_OFF             = 14    # Switch everything off
COMMAND_GET_DRIVE_A_FAULT   = 15    # Get the drive fault flag for motor A, indicates faults such as short-circuits and under voltage
COMMAND_GET_DRIVE_B_FAULT   = 16    # Get the drive fault flag for motor B, indicates faults such as short-circuits and under voltage
COMMAND_SET_ALL_FWD         = 17    # Set all motors PWM rate in a forwards direction
COMMAND_SET_ALL_REV         = 18    # Set all motors PWM rate in a reverse direction
COMMAND_SET_FAILSAFE        = 19    # Set the failsafe flag, turns the motors off if communication is interrupted
COMMAND_GET_FAILSAFE        = 20    # Get the failsafe flag
COMMAND_GET_BATT_VOLT       = 21    # Get the battery voltage reading
COMMAND_SET_BATT_LIMITS     = 22    # Set the battery monitoring limits
COMMAND_GET_BATT_LIMITS     = 23    # Get the battery monitoring limits
COMMAND_GET_ID              = 0x99  # Get the board identifier
COMMAND_SET_I2C_ADD         = 0xAA  # Set a new I2C address

COMMAND_VALUE_FWD           = 1     # I2C value representing forward
COMMAND_VALUE_REV           = 2     # I2C value representing reverse

COMMAND_VALUE_ON            = 1     # I2C value representing on
COMMAND_VALUE_OFF           = 0     # I2C value representing off

COMMAND_ANALOG_MAX          = 0x3FF # Maximum value for analog readings


def ScanForThunderBorg(busNumber = 1):
    """
ScanForThunderBorg([busNumber])

Scans the I²C bus for a ThunderBorg boards and returns a list of all usable addresses
The busNumber if supplied is which I²C bus to scan, 0 for Rev 1 boards, 1 for Rev 2 boards, if not supplied the default is 1
    """
    found = []
    print 'Scanning I²C bus #%d' % (busNumber)
    bus = smbus.SMBus(busNumber)
    for address in range(0x03, 0x78, 1):
        try:
            i2cRecv = bus.read_i2c_block_data(address, COMMAND_GET_ID, I2C_MAX_LEN)
            if len(i2cRecv) == I2C_MAX_LEN:
                if i2cRecv[1] == I2C_ID_THUNDERBORG:
                    print 'Found ThunderBorg at %02X' % (address)
                    found.append(address)
                else:
                    pass
            else:
                pass
        except KeyboardInterrupt:
            raise
        except:
            pass
    if len(found) == 0:
        print 'No ThunderBorg boards found, is bus #%d correct (should be 0 for Rev 1, 1 for Rev 2)' % (busNumber)
    elif len(found) == 1:
        print '1 ThunderBorg board found'
    else:
        print '%d ThunderBorg boards found' % (len(found))
    return found


def SetNewAddress(newAddress, oldAddress = -1, busNumber = 1):
    """
SetNewAddress(newAddress, [oldAddress], [busNumber])

Scans the I²C bus for the first ThunderBorg and sets it to a new I2C address
If oldAddress is supplied it will change the address of the board at that address rather than scanning the bus
The busNumber if supplied is which I²C bus to scan, 0 for Rev 1 boards, 1 for Rev 2 boards, if not supplied the default is 1
Warning, this new I²C address will still be used after resetting the power on the device
    """
    if newAddress < 0x03:
        print 'Error, I²C addresses below 3 (0x03) are reserved, use an address between 3 (0x03) and 119 (0x77)'
        return
    elif newAddress > 0x77:
        print 'Error, I²C addresses above 119 (0x77) are reserved, use an address between 3 (0x03) and 119 (0x77)'
        return
    if oldAddress < 0x0:
        found = ScanForThunderBorg(busNumber)
        if len(found) < 1:
            print 'No ThunderBorg boards found, cannot set a new I²C address!'
            return
        else:
            oldAddress = found[0]
    print 'Changing I²C address from %02X to %02X (bus #%d)' % (oldAddress, newAddress, busNumber)
    bus = smbus.SMBus(busNumber)
    try:
        i2cRecv = bus.read_i2c_block_data(oldAddress, COMMAND_GET_ID, I2C_MAX_LEN)
        if len(i2cRecv) == I2C_MAX_LEN:
            if i2cRecv[1] == I2C_ID_THUNDERBORG:
                foundChip = True
                print 'Found ThunderBorg at %02X' % (oldAddress)
            else:
                foundChip = False
                print 'Found a device at %02X, but it is not a ThunderBorg (ID %02X instead of %02X)' % (oldAddress, i2cRecv[1], I2C_ID_THUNDERBORG)
        else:
            foundChip = False
            print 'Missing ThunderBorg at %02X' % (oldAddress)
    except KeyboardInterrupt:
        raise
    except:
        foundChip = False
        print 'Missing ThunderBorg at %02X' % (oldAddress)
    if foundChip:
        bus.write_byte_data(oldAddress, COMMAND_SET_I2C_ADD, newAddress)
        time.sleep(0.1)
        print 'Address changed to %02X, attempting to talk with the new address' % (newAddress)
        try:
            i2cRecv = bus.read_i2c_block_data(newAddress, COMMAND_GET_ID, I2C_MAX_LEN)
            if len(i2cRecv) == I2C_MAX_LEN:
                if i2cRecv[1] == I2C_ID_THUNDERBORG:
                    foundChip = True
                    print 'Found ThunderBorg at %02X' % (newAddress)
                else:
                    foundChip = False
                    print 'Found a device at %02X, but it is not a ThunderBorg (ID %02X instead of %02X)' % (newAddress, i2cRecv[1], I2C_ID_THUNDERBORG)
            else:
                foundChip = False
                print 'Missing ThunderBorg at %02X' % (newAddress)
        except KeyboardInterrupt:
            raise
        except:
            foundChip = False
            print 'Missing ThunderBorg at %02X' % (newAddress)
    if foundChip:
        print 'New I²C address of %02X set successfully' % (newAddress)
    else:
        print 'Failed to set new I²C address...'


# Class used to control ThunderBorg
class ThunderBorg:
    """
This module is designed to communicate with the ThunderBorg

busNumber               I²C bus on which the ThunderBorg is attached (Rev 1 is bus 0, Rev 2 is bus 1)
bus                     the smbus object used to talk to the I²C bus
i2cAddress              The I²C address of the ThunderBorg chip to control
foundChip               True if the ThunderBorg chip can be seen, False otherwise
printFunction           Function reference to call when printing text, if None "print" is used
    """

    # Shared values used by this class
    busNumber               = 1                     # Check here for Rev 1 vs Rev 2 and select the correct bus
    i2cAddress              = I2C_ID_THUNDERBORG    # I²C address, override for a different address
    bus                     = None
    foundChip               = False
    printFunction           = None


    def Print(self, message):
        """
Print(message)

Wrapper used by the ThunderBorg instance to print messages, will call printFunction if set, print otherwise
        """
        if self.printFunction == None:
            print message
        else:
            self.printFunction(message)


    def NoPrint(self, message):
        """
NoPrint(message)

Does nothing, intended for disabling diagnostic printout by using:
TB = ThunderBorg.ThunderBorg()
TB.printFunction = TB.NoPrint
        """
        pass


    def Init(self, tryOtherBus = False):
        """
Init([tryOtherBus])

Prepare the I2C driver for talking to the ThunderBorg

If tryOtherBus is True, this function will attempt to use the other bus if the ThunderBorg devices can not be found on the current busNumber
    This is only really useful for early Raspberry Pi models!
        """
        self.Print('Loading ThunderBorg on bus %d, address %02X' % (self.busNumber, self.i2cAddress))

        # Open the bus
        self.bus = smbus.SMBus(self.busNumber)

        # Check for ThunderBorg
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_ID, I2C_MAX_LEN)
            if len(i2cRecv) == I2C_MAX_LEN:
                if i2cRecv[1] == I2C_ID_THUNDERBORG:
                    self.foundChip = True
                    self.Print('Found ThunderBorg at %02X' % (self.i2cAddress))
                else:
                    self.foundChip = False
                    self.Print('Found a device at %02X, but it is not a ThunderBorg (ID %02X instead of %02X)' % (self.i2cAddress, i2cRecv[1], I2C_ID_THUNDERBORG))
            else:
                self.foundChip = False
                self.Print('Missing ThunderBorg at %02X' % (self.i2cAddress))
        except KeyboardInterrupt:
            raise
        except:
            self.foundChip = False
            self.Print('Missing ThunderBorg at %02X' % (self.i2cAddress))

        # See if we are missing chips
        if not self.foundChip:
            self.Print('ThunderBorg was not found')
            if tryOtherBus:
                if self.busNumber == 1:
                    self.busNumber = 0
                else:
                    self.busNumber = 1
                self.Print('Trying bus %d instead' % (self.busNumber))
                self.Init(False)
            else:
                self.Print('Are you sure your ThunderBorg is properly attached, the correct address is used, and the I2C drivers are running?')
                self.bus = None
        else:
            self.Print('ThunderBorg loaded on bus %d' % (self.busNumber))


    def SetMotor2(self, power):
        """
SetMotor2(power)

Sets the drive level for motor 2, from +1 to -1.
e.g.
SetMotor2(0)     -> motor 2 is stopped
SetMotor2(0.75)  -> motor 2 moving forward at 75% power
SetMotor2(-0.5)  -> motor 2 moving reverse at 50% power
SetMotor2(1)     -> motor 2 moving forward at 100% power
        """
        if power < 0:
            # Reverse
            command = COMMAND_SET_B_REV
            pwm = -int(PWM_MAX * power)
            if pwm > PWM_MAX:
                pwm = PWM_MAX
        else:
            # Forward / stopped
            command = COMMAND_SET_B_FWD
            pwm = int(PWM_MAX * power)
            if pwm > PWM_MAX:
                pwm = PWM_MAX

        try:
            self.bus.write_byte_data(self.i2cAddress, command, pwm)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending motor 2 drive level!')


    def GetMotor2(self):
        """
power = GetMotor2()

Gets the drive level for motor 2, from +1 to -1.
e.g.
0     -> motor 2 is stopped
0.75  -> motor 2 moving forward at 75% power
-0.5  -> motor 2 moving reverse at 50% power
1     -> motor 2 moving forward at 100% power
        """
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_B, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading motor 2 drive level!')
            return

        power = float(i2cRecv[2]) / float(PWM_MAX)

        if i2cRecv[1] == COMMAND_VALUE_FWD:
            return power
        elif i2cRecv[1] == COMMAND_VALUE_REV:
            return -power
        else:
            return


    def SetMotor1(self, power):
        """
SetMotor1(power)

Sets the drive level for motor 1, from +1 to -1.
e.g.
SetMotor1(0)     -> motor 1 is stopped
SetMotor1(0.75)  -> motor 1 moving forward at 75% power
SetMotor1(-0.5)  -> motor 1 moving reverse at 50% power
SetMotor1(1)     -> motor 1 moving forward at 100% power
        """
        if power < 0:
            # Reverse
            command = COMMAND_SET_A_REV
            pwm = -int(PWM_MAX * power)
            if pwm > PWM_MAX:
                pwm = PWM_MAX
        else:
            # Forward / stopped
            command = COMMAND_SET_A_FWD
            pwm = int(PWM_MAX * power)
            if pwm > PWM_MAX:
                pwm = PWM_MAX

        try:
            self.bus.write_byte_data(self.i2cAddress, command, pwm)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending motor 1 drive level!')


    def GetMotor1(self):
        """
power = GetMotor1()

Gets the drive level for motor 1, from +1 to -1.
e.g.
0     -> motor 1 is stopped
0.75  -> motor 1 moving forward at 75% power
-0.5  -> motor 1 moving reverse at 50% power
1     -> motor 1 moving forward at 100% power
        """
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_A, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading motor 1 drive level!')
            return

        power = float(i2cRecv[2]) / float(PWM_MAX)

        if i2cRecv[1] == COMMAND_VALUE_FWD:
            return power
        elif i2cRecv[1] == COMMAND_VALUE_REV:
            return -power
        else:
            return


    def SetMotors(self, power):
        """
SetMotors(power)

Sets the drive level for all motors, from +1 to -1.
e.g.
SetMotors(0)     -> all motors are stopped
SetMotors(0.75)  -> all motors are moving forward at 75% power
SetMotors(-0.5)  -> all motors are moving reverse at 50% power
SetMotors(1)     -> all motors are moving forward at 100% power
        """
        if power < 0:
            # Reverse
            command = COMMAND_SET_ALL_REV
            pwm = -int(PWM_MAX * power)
            if pwm > PWM_MAX:
                pwm = PWM_MAX
        else:
            # Forward / stopped
            command = COMMAND_SET_ALL_FWD
            pwm = int(PWM_MAX * power)
            if pwm > PWM_MAX:
                pwm = PWM_MAX

        try:
            self.bus.write_byte_data(self.i2cAddress, command, pwm)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending all motors drive level!')


    def MotorsOff(self):
        """
MotorsOff()

Sets all motors to stopped, useful when ending a program
        """
        try:
            self.bus.write_byte_data(self.i2cAddress, COMMAND_ALL_OFF, 0)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending motors off command!')


    def SetLed1(self, r, g, b):
        """
SetLed1(r, g, b)

Sets the current colour of the ThunderBorg LED. r, g, b may each be between 0 and 1
e.g.
SetLed1(0, 0, 0)       -> ThunderBorg LED off
SetLed1(1, 1, 1)       -> ThunderBorg LED full white
SetLed1(1.0, 0.5, 0.0) -> ThunderBorg LED bright orange
SetLed1(0.2, 0.0, 0.2) -> ThunderBorg LED dull purple
        """
        levelR = max(0, min(PWM_MAX, int(r * PWM_MAX)))
        levelG = max(0, min(PWM_MAX, int(g * PWM_MAX)))
        levelB = max(0, min(PWM_MAX, int(b * PWM_MAX)))

        try:
            self.bus.write_i2c_block_data(self.i2cAddress, COMMAND_SET_LED1, [levelR, levelG, levelB])
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending colour for the ThunderBorg LED!')


    def GetLed1(self):
        """
r, g, b = GetLed1()

Gets the current colour of the ThunderBorg LED. r, g, b may each be between 0 and 1
e.g.
0, 0, 0       -> ThunderBorg LED off
1, 1, 1       -> ThunderBorg LED full white
1.0, 0.5, 0.0 -> ThunderBorg LED bright orange
0.2, 0.0, 0.2 -> ThunderBorg LED dull purple
        """
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_LED1, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading ThunderBorg LED colour!')
            return

        r = i2cRecv[1] / float(PWM_MAX)
        g = i2cRecv[2] / float(PWM_MAX)
        b = i2cRecv[3] / float(PWM_MAX)
        return r, g, b


    def SetLed2(self, r, g, b):
        """
SetLed2(r, g, b)

Sets the current colour of the ThunderBorg Lid LED. r, g, b may each be between 0 and 1
e.g.
SetLed2(0, 0, 0)       -> ThunderBorg Lid LED off
SetLed2(1, 1, 1)       -> ThunderBorg Lid LED full white
SetLed2(1.0, 0.5, 0.0) -> ThunderBorg Lid LED bright orange
SetLed2(0.2, 0.0, 0.2) -> ThunderBorg Lid LED dull purple
        """
        levelR = max(0, min(PWM_MAX, int(r * PWM_MAX)))
        levelG = max(0, min(PWM_MAX, int(g * PWM_MAX)))
        levelB = max(0, min(PWM_MAX, int(b * PWM_MAX)))

        try:
            self.bus.write_i2c_block_data(self.i2cAddress, COMMAND_SET_LED2, [levelR, levelG, levelB])
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending colour for the ThunderBorg Lid LED!')


    def GetLed2(self):
        """
r, g, b = GetLed2()

Gets the current colour of the ThunderBorg Lid LED. r, g, b may each be between 0 and 1
e.g.
0, 0, 0       -> ThunderBorg Lid LED off
1, 1, 1       -> ThunderBorg Lid LED full white
1.0, 0.5, 0.0 -> ThunderBorg Lid LED bright orange
0.2, 0.0, 0.2 -> ThunderBorg Lid LED dull purple
        """
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_LED2, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading ThunderBorg Lid LED colour!')
            return

        r = i2cRecv[1] / float(PWM_MAX)
        g = i2cRecv[2] / float(PWM_MAX)
        b = i2cRecv[3] / float(PWM_MAX)
        return r, g, b


    def SetLeds(self, r, g, b):
        """
SetLeds(r, g, b)

Sets the current colour of both LEDs. r, g, b may each be between 0 and 1
e.g.
SetLeds(0, 0, 0)       -> Both LEDs off
SetLeds(1, 1, 1)       -> Both LEDs full white
SetLeds(1.0, 0.5, 0.0) -> Both LEDs bright orange
SetLeds(0.2, 0.0, 0.2) -> Both LEDs dull purple
        """
        levelR = max(0, min(PWM_MAX, int(r * PWM_MAX)))
        levelG = max(0, min(PWM_MAX, int(g * PWM_MAX)))
        levelB = max(0, min(PWM_MAX, int(b * PWM_MAX)))

        try:
            self.bus.write_i2c_block_data(self.i2cAddress, COMMAND_SET_LEDS, [levelR, levelG, levelB])
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending colour for both LEDs!')


    def SetLedShowBattery(self, state):
        """
SetLedShowBattery(state)

Sets the system to enable or disable the LEDs showing the current battery level
If enabled the LED colours will be ignored and will use the current battery reading instead
This sweeps from fully green for maximum voltage (35 V) to fully red for minimum voltage (7 V)
        """
        if state:
            level = COMMAND_VALUE_ON
        else:
            level = COMMAND_VALUE_OFF

        try:
            self.bus.write_byte_data(self.i2cAddress, COMMAND_SET_LED_BATT_MON, level)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending LED battery monitoring state!')


    def GetLedShowBattery(self):
        """
state = GetLedShowBattery()

Gets if the system is using the LEDs to show the current battery level, true for enabled, false for disabled
If enabled the LED colours will be ignored and will use the current battery reading instead
This sweeps from fully green for maximum voltage (35 V) to fully red for minimum voltage (7 V)
        """ 
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_LED_BATT_MON, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading LED battery monitoring state!')
            return

        if i2cRecv[1] == COMMAND_VALUE_OFF:
            return False
        else:
            return True


    def SetCommsFailsafe(self, state):
        """
SetCommsFailsafe(state)

Sets the system to enable or disable the communications failsafe
The failsafe will turn the motors off unless it is commanded at least once every 1/4 of a second
Set to True to enable this failsafe, set to False to disable this failsafe
The failsafe is disabled at power on
        """
        if state:
            level = COMMAND_VALUE_ON
        else:
            level = COMMAND_VALUE_OFF

        try:
            self.bus.write_byte_data(self.i2cAddress, COMMAND_SET_FAILSAFE, level)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending communications failsafe state!')


    def GetCommsFailsafe(self):
        """
state = GetCommsFailsafe()

Read the current system state of the communications failsafe, True for enabled, False for disabled
The failsafe will turn the motors off unless it is commanded at least once every 1/4 of a second
        """ 
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_FAILSAFE, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading communications failsafe state!')
            return

        if i2cRecv[1] == COMMAND_VALUE_OFF:
            return False
        else:
            return True


    def GetDriveFault1(self):
        """
state = GetDriveFault1()

Reads the motor drive fault state for motor #1, False for no problems, True for a fault has been detected
Faults may indicate power problems, such as under-voltage (not enough power), and may be cleared by setting a lower drive power
If a fault is persistent, it repeatably occurs when trying to control the board, this may indicate a wiring problem such as:
    * The supply is not powerful enough for the motors
        The board has a bare minimum requirement of 6V to operate correctly
        A recommended minimum supply of 7.2V should be sufficient for smaller motors
    * The + and - connections for motor #1 are connected to each other
    * Either + or - is connected to ground (GND, also known as 0V or earth)
    * Either + or - is connected to the power supply (V+, directly to the battery or power pack)
    * One of the motors may be damaged
Faults will self-clear, they do not need to be reset, however some faults require both motors to be moving at less than 100% to clear
The easiest way to check is to put both motors at a low power setting which is high enough for them to rotate easily, such as 30%
Note that the fault state may be true at power up, this is normal and should clear when both motors have been driven
For more details check the website at www.piborg.org/thunderborg and double check the wiring instructions
        """ 
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_DRIVE_A_FAULT, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading the drive fault state for motor #1!')
            return

        if i2cRecv[1] == COMMAND_VALUE_OFF:
            return False
        else:
            return True


    def GetDriveFault2(self):
        """
state = GetDriveFault2()

Reads the motor drive fault state for motor #2, False for no problems, True for a fault has been detected
Faults may indicate power problems, such as under-voltage (not enough power), and may be cleared by setting a lower drive power
If a fault is persistent, it repeatably occurs when trying to control the board, this may indicate a wiring problem such as:
    * The supply is not powerful enough for the motors
        The board has a bare minimum requirement of 6V to operate correctly
        A recommended minimum supply of 7.2V should be sufficient for smaller motors
    * The + and - connections for motor #2 are connected to each other
    * Either + or - is connected to ground (GND, also known as 0V or earth)
    * Either + or - is connected to the power supply (V+, directly to the battery or power pack)
    * One of the motors may be damaged
Faults will self-clear, they do not need to be reset, however some faults require both motors to be moving at less than 100% to clear
The easiest way to check is to put both motors at a low power setting which is high enough for them to rotate easily, such as 30%
Note that the fault state may be true at power up, this is normal and should clear when both motors have been driven
For more details check the website at www.piborg.org/thunderborg and double check the wiring instructions
        """ 
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_DRIVE_B_FAULT, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading the drive fault state for motor #2!')
            return

        if i2cRecv[1] == COMMAND_VALUE_OFF:
            return False
        else:
            return True


    def GetBatteryReading(self):
        """
voltage = GetBatteryReading()

Reads the current battery level from the main input.
Returns the value as a voltage based on the 3.3 V rail as a reference.
        """ 
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_BATT_VOLT, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading battery level!')
            return

        raw = (i2cRecv[1] << 8) + i2cRecv[2]
        level = float(raw) / float(COMMAND_ANALOG_MAX)
        level *= VOLTAGE_PIN_MAX
        return level + VOLTAGE_PIN_CORRECTION


    def SetBatteryMonitoringLimits(self, minimum, maximum):
        """
SetBatteryMonitoringLimits(minimum, maximum)

Sets the battery monitoring limits used for setting the LED colour.
The values are between 0 and 36.3 V.
The colours shown range from full red at minimum or below, yellow half way, and full green at maximum or higher.
These values are stored in EEPROM and reloaded when the board is powered.
        """
        levelMin = minimum / float(VOLTAGE_PIN_MAX)
        levelMax = maximum / float(VOLTAGE_PIN_MAX)
        levelMin = max(0, min(0xFF, int(levelMin * 0xFF)))
        levelMax = max(0, min(0xFF, int(levelMax * 0xFF)))

        try:
            self.bus.write_i2c_block_data(self.i2cAddress, COMMAND_SET_BATT_LIMITS, [levelMin, levelMax])
            time.sleep(0.2) # Wait for EEPROM write to complete
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed sending battery monitoring limits!')


    def GetBatteryMonitoringLimits(self):
        """
minimum, maximum = GetBatteryMonitoringLimits()

Reads the current battery monitoring limits used for setting the LED colour.
The values are between 0 and 36.3 V.
The colours shown range from full red at minimum or below, yellow half way, and full green at maximum or higher.
        """ 
        try:
            i2cRecv = self.bus.read_i2c_block_data(self.i2cAddress, COMMAND_GET_BATT_LIMITS, I2C_MAX_LEN)
        except KeyboardInterrupt:
            raise
        except:
            self.Print('Failed reading battery monitoring limits!')
            return

        rawMin = i2cRecv[1]
        rawMax = i2cRecv[2]
        levelMin = float(rawMin) / float(0xFF)
        levelMax = float(rawMax) / float(0xFF)
        levelMin *= VOLTAGE_PIN_MAX
        levelMax *= VOLTAGE_PIN_MAX
        return levelMin, levelMax


    def Help(self):
        """
Help()

Displays the names and descriptions of the various functions and settings provided
        """
        funcList = [ThunderBorg.__dict__.get(a) for a in dir(ThunderBorg) if isinstance(ThunderBorg.__dict__.get(a), types.FunctionType)]
        funcListSorted = sorted(funcList, key = lambda x: x.func_code.co_firstlineno)

        print self.__doc__
        print
        for func in funcListSorted:
            print '=== %s === %s' % (func.func_name, func.func_doc)