setup BLtouch and edit mesh error

[Blisk]

I am trying to setup mesh edit, because now bl touch tries to probe bed out of limit where is nothing.
I tried everything but still stuck on it. Can anyone help me how to setup mesh whre bl touch probe can detect heatbed?
When I press on that yellow dot it tries to probe BLtouch out of heatbed.
Also I get this error when I try to edit mesh.

[XeroZar]

I am trying to setup mesh edit, because now bl touch tries to probe bed out of limit where is nothing.

I tried everything but still stuck on it. Can anyone help me how to setup mesh whre bl touch probe can detect heatbed?

When I press on that yellow dot it tries to probe BLtouch out of heatbed.

Also I get this error when I try to edit mesh.

Have you enabled "#define G26_MESH_VALIDATION in Marlin config.h file?

[Blisk]

You mean for display or for motherboard? I assume you think for display in config.ini
I did this now and still nozzle crashing into heatbed.
don't know how to setup BLtouch to probe all 9 points.

[XeroZar]

On your mother board firmware... I am assume it's Marlin?

[Blisk]

I did that too, but still can not manage to make printer check all 9 points of heatbed. What I am doing wrong?
Here is video
https://nextcloud.povej.net/index.php/s/LYqaHFxzoypgNgi
Also when I press on mesh for PLA I get this error

[XeroZar]

I did that too, but still can not manage to make printer check all 9 points of heatbed. What I am doing wrong?

Here is video

https://nextcloud.povej.net/index.php/s/LYqaHFxzoypgNgi

Also when I press on mesh for PLA I get this error

Have you enabled "#define G26_MESH_VALIDATION in Marlin config.h file?

[Blisk]

Have you enabled "#define G26_MESH_VALIDATION in Marlin config.h file?
Yes I did and uploaded new firmware to printer. But don't know why is dimmed that option.

[Blisk]

It is time to replace the display with a regular one before happened more damage to the printer.

[XeroZar]

It is time to replace the display with a regular one before happened more damage to the printer.

Did you change the settings that match with your firmware of the main board?

[Blisk]

Which settings?
Both board and TFT si from bigtreetech. I upload both firmware for ender 3 pro.

[radek8]

It means that you have the probe offset set incorrectly in Marlin.

[radek8]

therefore

[radek8]

can you send the configuration files?

[Blisk]

Ok, thank you for heping.
here in zip is Configuration.h from marlin which is on motherboard and config.ini from firmware for TFT35
I just want to make it work TFT35 display and BTT motherboard together, with BLtouch and filament sensor.
marlin.zip

[radek8]

What is the physical distance of the BLTouch probe from the nozzle in X-axis and Y-axis?

Also send configuration_adv.h

[radek8]

Opravdu si sám kompiluje Marlin?
Zaslaná konfogurace neodpvídá obrázkům ktreré jsi poslal.