BTT SKR MINI E3 V3 AND TFT35 E3 V3.01 TOUCH MODE CONSTANTLY RESETS AND 'NO PRINTER ATTACHED' MESSAGE IS CONTINUOUS.

[Jhendrix0875]

I HAVE AN ENDER 3 PRO AND I JUST REPLACED THE MOTHERBOARD AND THE SCREEN. I UPDATED THE FIRMWARE TO THE LATEST ON THE TFT DEVICE. I HAVE CHECKED 50 TIMES TO MAKE SURE THAT THE SERIAL CABLE IS PLUGGED IN CORRECTLY, AND I HAVE VERIFIED THE BAUD RATE WITH THE PRINTER AND THE TFT ARE THE SAME. IT WORKS IN MARLIN MODE AND I AM ABLE TO CONTROL THE PRINTER THAT WAY. HOW DO I GET THE TOUCH MODE TO WORK?

[Jhendrix0875]

Here are my config and config adv files
Configuration.zip

[radek8]

Close the ticket if you have solved the problem. Thank you

[radek8]

bigtreetech/BIGTREETECH-TouchScreenFirmware#2811