Adding 2nd Icon x Extender to Cubase 14

[ThewMixer]

Hi , I got the script running with 1 extender as devices: ["extender", "main"]
but when i add the 2nd extender the script doesn't run devices: ["extender", "main", "extender"]
Am I missing something here any help appreciated .

John

[bjoluc]

Hey John,

your script config looks all good! If the controllers are not automatically detected in the MIDI Remote pane, this is likely an issue with the MIDI port names (you can still set up the MIDI Remote by clicking the "+" button in the MIDI Remote pane and manually selecting your ports). The script expects the MIDI port names of the second (right) extender to start with "iCON V1-X2". What are your MIDI port names?

[ThewMixer]

Hi Bjoluc, Thank you for your reply I been on the road , this is busy season , I return home Aug 26 and can look at some of these possibilities . hopefully this will resolve it. Thanks for taking the time John From: bjoluc ***@***.***> Sent: Monday, August 11, 2025 9:42 PM To: bjoluc/cubase-mcu-midiremote ***@***.***> Cc: ThewMixer ***@***.***>; Author ***@***.***> Subject: Re: [bjoluc/cubase-mcu-midiremote] Adding 2nd Icon x Extender to Cubase 14 (Discussion #78) Hey John, your script config looks all good! If the controllers are not automatically detected in the MIDI Remote pane, this is likely an issue with the MIDI port names (you can still set up the MIDI Remote by clicking the "+" button in the MIDI Remote pane and manually selecting your ports). The script expects the MIDI port names of the second (right) extender to start with "iCON V1-X2". What are your MIDI port names? — Reply to this email directly, view it on GitHub <#78 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BUUW6QS5ALUO5HDH434NIH33NDW2BAVCNFSM6AAAAACBQWW3JGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTIMBXGUZTCNQ> . You are receiving this because you authored the thread. <https://github.com/notifications/beacon/BUUW6QQDPISWA27KZ4DWFAD3NDW2BA5CNFSM6AAAAACBQWW3JGWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQA23C3I.gif> Message ID: ***@***.*** ***@***.***> >

[ThewMixer]

Hi and thanks again for the info was very helpful . my 2nd extender is named X3 , I was able to figure it out and get it to work now adding it as a device , But I have one issue , when Cubase loads up it does not pull the script in , Don’t know what happen tried to re-save the script a few times , and I have to manually add the devices every time I open up Cubase . any ideas ? Also , as I'm sure you are aware the Master fader LED s comes up as a mono signal Is there a fix for that ??? Thanks appreciate your reply.. John From: bjoluc ***@***.***> Sent: Monday, August 11, 2025 3:42 PM To: bjoluc/cubase-mcu-midiremote ***@***.***> Cc: ThewMixer ***@***.***>; Author ***@***.***> Subject: Re: [bjoluc/cubase-mcu-midiremote] Adding 2nd Icon x Extender to Cubase 14 (Discussion #78) Hey John, your script config looks all good! If the controllers are not automatically detected in the MIDI Remote pane, this is likely an issue with the MIDI port names (you can still set up the MIDI Remote by clicking the "+" button in the MIDI Remote pane and manually selecting your ports). The script expects the MIDI port names of the second (right) extender to start with "iCON V1-X2". What are your MIDI port names? — Reply to this email directly, view it on GitHub <#78 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BUUW6QS5ALUO5HDH434NIH33NDW2BAVCNFSM6AAAAACBQWW3JGVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTIMBXGUZTCNQ> . You are receiving this because you authored the thread. <https://github.com/notifications/beacon/BUUW6QQDPISWA27KZ4DWFAD3NDW2BA5CNFSM6AAAAACBQWW3JGWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQA23C3I.gif> Message ID: ***@***.*** ***@***.***> >