New request #143
Replies: 6 comments 3 replies
-
|
Could you please create a separate topic for each light? This will make searching easier for other users and also allow to vote per light. |
Beta Was this translation helpful? Give feedback.
-
|
Of course, I will do that Bram. |
Beta Was this translation helpful? Give feedback.
-
|
@dennidoubles Various manufacturers of Zigbee equipment produce such a large number of models (compatible with the Hue Bridge) that it is virtually impossible for anybody to have a larger subset of them at the same time. That is why it is very important to support the project by own measurements of as many users as possible, and the cost of the necessary equipment (it can be some model of smartplug) isn't really high - eg. Shelly is priced 20€. And at the end - before posting any request it should be checked if there is no planned measurement of requested model: |
Beta Was this translation helpful? Give feedback.
-
|
I truly understand what you're saying. As I am not a developer or at least somewhat technical, I can't imagine how much work/time it costs to have the data available for the outside world. What I would like to request, are all widely used Hue lights, nothing special. Now, If you'd like me to help measuring stuff, I could try to do so. Is there any documentation about "how to" , so it is measured following guideliness you guys follow? Kind regards! |
Beta Was this translation helpful? Give feedback.
-
|
The are scripts available in |
Beta Was this translation helpful? Give feedback.
-
|
@dennidoubles Except translations of some interesting projects (eg. Hue Essentials or many HA components available in HACS) I've never been a developer, because I'm not programmer, but thanks to my work I've enough electronics and electric knowledge (so I'm able to help with this project). Blitzwolf SPH13 should be sufficient hardware, as it is Tuya based, and ready made script dedicated to Tuya hardware exist. BTW Shelly just works "out of the box" but it is NOT ideal hardware (slowness and inability to measure <0.5W but in case of Tuya based hardware I expect similar problems), so I'm trying to find best smart-plug available in shops, which will have smallest disadvantages for measuring - my next test will be tp-link HS110. New idea: This would, of course, require first finding the appropriate equipment suitable for fully reliable measurements (we do not have such a thing yet). Some time ago I thought about ability sending bulbs/lamps to measure when someone have free hardware resources for this, but majority of us lives in different countries, so costs of logistics would be really high (and comparable with smart-plug, so it make no sense). |
Beta Was this translation helpful? Give feedback.
-
|
Sorry for misunderstanding here, but I do have Blitzwolf SHP13 in my config running. 16 to be exact. LocalTuya (or even better, Tuya v2) I'm also known with and I'm using that for some Tuya devices I have in my house. What I meant, is that I don't know how I could help measuring lights. This has all started, because I am enthusiastic about this solution and made use of the possibility to request lights... Anyway, a long off-topic discussion, so I think I need to keep it short here. |
Beta Was this translation helpful? Give feedback.
-
|
You do NOT have SPH13 (as mentioned before, so I thought it is WiFi based model unknown to me), it is SHP13 (Zigbee) so your hardware isn't supported now (and if you are unable to made own measure script), but @bramstroker planned ability to use hass-script to measure in the future (as @cascer1 have prepared #110 but produced values have only 1 decimal point accuracy, and it isn't enough) . For now easiest solution for you (I you are unable to use hass-scrpit) will be buying Shelly Plug or Shelly Plug S (as it is easiest to be used now).
You have ability to change Subject of this discussion and move it to "Ideas", and there really is no need to have this thread short, as models list is at the top, so it is always visible for a new reader, and from the beginning this thread does not meet the assumptions to be a request (each model in separate thread, and no duplicates with models reported as planned). Most of active contributors just already posted planned models here: If you want to help us, you can measure your lights, in short it looks like
I know that it is not as simple as it looks, each point requires proper implementation, but scripts inside contain some basic documentation. In case of Philips/Signify mechanical and electrical skills may be useful, as it looks like there are some models of integrated lamps based on common models of bulb, but with slightly modified firmware just to show different hardware tag. |
Beta Was this translation helpful? Give feedback.
-
|
Please do not use SHP13 for accurate measurements. It usually shows about 20% too much: SHP15 is much more precise. |
Beta Was this translation helpful? Give feedback.
-
Hi there,
I would like to request LUT possible configs for the following lights:
LWW001 (Philips Hue Lucca Outdoor Wall Light )
LCS001 (Philips Hue Lily Outdoor Spot Light RGBCCT)
LTC012 (Philips Hue Struana Ceiling Light)
LTG002 (Philips Hue White Ambiance GU10 w/ BT)
LST002 (Philips Hue Lightstrip Plus)
LWV001 (Philips Hue White Filament Bulb ST64 E27)
Furthermore the Tradfri bulb E27 WW Clear 250LM
and a model called LCX003 where I can't find the details of.
If you'd like me to add these in separate requests, let me know.
Many thanks for your possible follow-up!
Beta Was this translation helpful? Give feedback.
All reactions