Couple of IKEA panels and 1000lm bulb

[confucius78]

Hi guys,

first of all: great work!

I got so enthousiastic I wanted to contribute as well, but as it is my first time in github and digging into this integration I have a question.

I have completed measurements for FLOALT panel WS 60x60 and 30x30, but where do I find the model no?
Is this on the physical device, or is it a noming you guys came up with yourself?

By the way: I also have a 1000lm bulb which doesn't get auto-detected so I am measuring that one as well, plus I have a 90x30 FLOALT panel which I am due to start on. Bit more of a hassle that one due to it's mounting :-)

[confucius78]

I want to try and create the PR myself just to learn, but at least these are the completed measurements for FLOALT panel 60x60 and 30x30
FLOALT panel WS 30x30.zip
FLOALT panel WS 60x60.zip

[bramstroker]

Hi, this is awesome. Great you want to contribute. Take your time to create a PR, it's not that difficult.

For the models you could check in zigbee DB on blackadder. https://zigbee.blakadder.com/Ikea_L1527.html

So for this light L1527 seem to be the right fit for the model directory name.
Name in model.json can be "Floalt LED Light Panel 30x30 cm".
And you need to add the Zigbee ID here for the Ikea lights: https://github.com/bramstroker/homeassistant-powercalc/blob/master/custom_components/powercalc/const.py#L94. So in this case "FLOALT panel WS 30x30".

Which gateway are you using to control your lights? Hue bridge or some other Zigbee stick?

[confucius78]

Actually I still use the original Ikea bridge :-) The nice thing is this way it keeps the firmware completely up-to-date, and to be honest: with Ikea being fully local control and quite stable I never felt a need to move to something else.

So I ended up taking the panels down to check the model no and indeed they are the same :-) Good to know I can just look it up as well. Will do that for that last one! Stille need to measure it though, may try over the weekend.

Just to check: as there seemed to be no letter for panels yet I decided to use 'P', makes sense right? :-)