[REQ] Adding support for Daum Electronic bikes

[johanlovgren]

A great addition to qdosmyos-zwift would be to add support for Daum Electronic bikes.

They have both treadmills and bikes, but I personally have a Ergo Bike 8008 TRS and a Premium 8i, and I think it would be great if (at least) they were supported.

The 8008 TRS bike can communicate over a RS232 cable and the Premium 8i bike communicates over TCP. The communication protocols are well documented and can be found here:
8008 TRS communication protocol (unfortunately in German)
Premium 8i communication protocol

[cagnulein]

Hi @johanlovgren sure! Are you gonna use QZ on android? Because for the rs232 we need an ftdi adaptor as I did for #1085

[cagnulein]

https://github.com/GoldenCheetah/GoldenCheetah/blob/cabe078453cbe8e136b8adf8d4187a5be878671b/src/Train/Daum.cpp

[johanlovgren]

Hi @johanlovgren sure! Are you gonna use QZ on android? Because for the rs232 we need an ftdi adaptor as I did for #1085

I'm planning to run QZ on a macOS device, then connect the rs232 using a rs232-usb converter.

I'm doing this in my current setup where I run my own built bridge-application for transmitting the data from the bike over ANT+. But now I'm planning to run Zwift on an AppleTV, meaning that I have to look for other protocols than ANT+. So I found QZ when doing research for that.

[cagnulein]

hah ok perfect!
it's a intel mac or a m1 one?

[johanlovgren]

I'll be running it on an intel.

[cagnulein]

@johanlovgren since in order to build for an intel mac i need to run my old mac book air, is it possible that, only for the test purposing, using an android device, connecting the ftdi cable?

[johanlovgren]

@johanlovgren since in order to build for an intel mac i need to run my old mac book air, is it possible that, only for the test purposing, using an android device, connecting the ftdi cable?

Unfortunately, I don't own any Android devices.. But I can maybe build for my intel mac and test on my own, if that's any help?

[cagnulein]

yes sure, i will tell you when i will be ready

[cagnulein]

@johanlovgren PR created. I commented it there

[stale]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.