Waher.Networking.MQTT.xml

<?xml version="1.0"?>
<doc>
    <assembly>
        <name>Waher.Networking.MQTT</name>
    </assembly>
    <members>
        <member name="T:Waher.Networking.MQTT.BinaryInput">
            <summary>
            Class that helps deserialize information stored in a binary packet.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.#ctor(System.Byte[])">
            <summary>
            Class that helps deserialize information stored in a binary packet.
            </summary>
            <param name="Data">Binary Data</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.#ctor(System.IO.MemoryStream)">
            <summary>
            Class that helps deserialize information stored in a binary packet.
            </summary>
            <param name="Data">Binary Data</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadByte">
            <summary>
            Reads the next byte of the stream.
            </summary>
            <returns>Next byte</returns>
            <exception cref="T:System.IO.EndOfStreamException">If there are no more bytes available.</exception>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadBytes(System.Int32)">
            <summary>
            Reads the next set of bytes of the stream.
            </summary>
            <param name="Length">Number of bytes to retrieve.</param>
            <returns>Binary block of data.</returns>
            <exception cref="T:System.IO.EndOfStreamException">If there is not sufficient bytes available.</exception>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadString">
            <summary>
            Reads the next string of the stream.
            </summary>
            <returns>String value.</returns>
            <exception cref="T:System.IO.EndOfStreamException">If there is not sufficient bytes available.</exception>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadUInt">
            <summary>
            Reads a variable-length unsigned integer from the stream.
            </summary>
            <returns>Unsigned integer.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadInt">
            <summary>
            Reads a variable-length signed integer from the stream.
            </summary>
            <returns>Signed integer.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadUInt16">
            <summary>
            Reads an unsignd 16-bit integer.
            </summary>
            <returns>16-bit integer.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadUInt32">
            <summary>
            Reads an unsignd 16-bit integer.
            </summary>
            <returns>32-bit integer.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadUInt64">
            <summary>
            Reads an unsignd 64-bit integer.
            </summary>
            <returns>64-bit integer.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadSingle">
            <summary>
            Reads a single-precision floating point value.
            </summary>
            <returns>Single-precision floating point value</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadDouble">
            <summary>
            Reads a double-precision floating point value.
            </summary>
            <returns>Double-precision floating point value</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadTimeSpan">
            <summary>
            Reads a TimeSpan value.
            </summary>
            <returns>TimeSpan.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadDateTime">
            <summary>
            Reads a DateTime value.
            </summary>
            <returns>DateTime.</returns>
        </member>
        <member name="P:Waher.Networking.MQTT.BinaryInput.Position">
            <summary>
            Current position in input stream.
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.BinaryInput.BytesLeft">
            <summary>
            Number of bytes left.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.GetRemainingData">
            <summary>
            Gets the remaining bytes.
            </summary>
            <returns>Remaining bytes.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadGuid">
            <summary>
            Reads a GUID value.
            </summary>
            <returns>GUID.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryInput.ReadBool">
            <summary>
            Reads a boolean value.
            </summary>
            <returns>Boolean value.</returns>
        </member>
        <member name="T:Waher.Networking.MQTT.BinaryOutput">
            <summary>
            Class that helps serialize information into a a binary packet.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.#ctor">
            <summary>
            Class that helps serialize information into a a binary packet.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.#ctor(System.Byte[])">
            <summary>
            Class that helps serialize information into a a binary packet.
            </summary>
            <param name="Data">Binary Data</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.#ctor(System.IO.MemoryStream)">
            <summary>
            Class that helps serialize information into a a binary packet.
            </summary>
            <param name="Data">Binary Data</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteByte(System.Byte)">
            <summary>
            Writes a byte to the binary output packet.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteBytes(System.Byte[])">
            <summary>
            Writes a block of bytes to the binary output packet.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteString(System.String)">
            <summary>
            Writes a string to the binary output packet.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.GetPacket">
            <summary>
            Gets the binary packet written so far.
            </summary>
            <returns>Binary packet.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteUInt(System.UInt64)">
            <summary>
            Writes a variable-length unsigned integer.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteInt(System.Int64)">
            <summary>
            Writes a variable-length signed integer.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteUInt16(System.UInt16)">
            <summary>
            Writes a 16-bit integer to the stream.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteUInt32(System.UInt32)">
            <summary>
            Writes a 32-bit integer to the stream.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteUInt64(System.UInt64)">
            <summary>
            Writes a 64-bit integer to the stream.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteSingle(System.Single)">
            <summary>
            Writes a single-precision floating point to the stream.
            </summary>
            <param name="f">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteDouble(System.Double)">
            <summary>
            Writes a double-precision floating point to the stream.
            </summary>
            <param name="d">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteTimeSpan(System.TimeSpan)">
            <summary>
            Writes a TimeSpan to the stream.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteDateTime(System.DateTime)">
            <summary>
            Writes a DateTime to the stream.
            </summary>
            <param name="Value">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteGuid(System.Guid)">
            <summary>
            Writes a GUID to the stream.
            </summary>
            <param name="Guid">Value to write.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.BinaryOutput.WriteBool(System.Boolean)">
            <summary>
            Writes a boolean value to the stream.
            </summary>
            <param name="b">Value to write.</param>
        </member>
        <member name="T:Waher.Networking.MQTT.MqttExceptionEventHandler">
            <summary>
            Connection error event handler.
            </summary>
            <param name="Sender">Sender of event.</param>
            <param name="Exception">Information about error received.</param>
        </member>
        <member name="T:Waher.Networking.MQTT.StateChangedEventHandler">
            <summary>
            Event handler for state change events.
            </summary>
            <param name="Sender">Sender of event.</param>
            <param name="NewState">New state reported.</param>
        </member>
        <member name="T:Waher.Networking.MQTT.PacketAcknowledgedEventHandler">
            <summary>
            Event handler used for events raised when data has been successfully acknowledged.
            </summary>
            <param name="Sender">Sender of event.</param>
            <param name="PacketIdentifier">Packet identifier of data successfully published.</param>
        </member>
        <member name="T:Waher.Networking.MQTT.ContentReceivedEventHandler">
            <summary>
            Event handler for events raised when content has been received.
            </summary>
            <param name="Sender">Sender of event.</param>
            <param name="Content">Content received.</param>
        </member>
        <member name="T:Waher.Networking.MQTT.MqttClient">
            <summary>
            Manages an MQTT connection. Implements MQTT v3.1.1, as defined in
            http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/os/mqtt-v3.1.1-os.html
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.#ctor(System.String,System.Int32,System.Security.Cryptography.X509Certificates.X509Certificate,Waher.Networking.Sniffers.ISniffer[])">
            <summary>
            Manages an MQTT connection. Implements MQTT v3.1.1, as defined in
            http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/os/mqtt-v3.1.1-os.html
            </summary>
            <param name="Host">Host name or IP address of MQTT server.</param>
            <param name="Port">Port to connect to.</param>
            <param name="ClientCertificate">Client certificate.</param>
            <param name="Sniffers">Sniffers to use.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.#ctor(System.String,System.Int32,System.Boolean,System.String,System.String,Waher.Networking.Sniffers.ISniffer[])">
            <summary>
            Manages an MQTT connection. Implements MQTT v3.1.1, as defined in
            http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/os/mqtt-v3.1.1-os.html
            </summary>
            <param name="Host">Host name or IP address of MQTT server.</param>
            <param name="Port">Port to connect to.</param>
            <param name="Tls">If TLS is used to encrypt communication.</param>
            <param name="UserName">User Name</param>
            <param name="Password">Password</param>
            <param name="Sniffers">Sniffers to use.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.#ctor(System.String,System.Int32,System.Security.Cryptography.X509Certificates.X509Certificate,System.String,Waher.Networking.MQTT.MqttQualityOfService,System.Boolean,System.Byte[],Waher.Networking.Sniffers.ISniffer[])">
            <summary>
            Manages an MQTT connection. Implements MQTT v3.1.1, as defined in
            http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/os/mqtt-v3.1.1-os.html
            </summary>
            <param name="Host">Host name or IP address of MQTT server.</param>
            <param name="Port">Port to connect to.</param>
            <param name="ClientCertificate">Client certificate.</param>
            <param name="WillTopic">Topic to publish the last will and testament, in case the connection drops unexpectedly.</param>
            <param name="WillQoS">Quality of Service of last will and testament, in case the connection drops unexpectedly.</param>
            <param name="WillRetain">If last will and testament should be retained, in case the connection drops unexpectedly.</param>
            <param name="WillData">Data of last will and testament, in case the connection drops unexpectedly.</param>
            <param name="Sniffers">Sniffers to use.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.#ctor(System.String,System.Int32,System.Boolean,System.String,System.String,System.String,Waher.Networking.MQTT.MqttQualityOfService,System.Boolean,System.Byte[],Waher.Networking.Sniffers.ISniffer[])">
            <summary>
            Manages an MQTT connection. Implements MQTT v3.1.1, as defined in
            http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/os/mqtt-v3.1.1-os.html
            </summary>
            <param name="Host">Host name or IP address of MQTT server.</param>
            <param name="Port">Port to connect to.</param>
            <param name="Tls">If TLS is used to encrypt communication.</param>
            <param name="UserName">User Name</param>
            <param name="Password">Password</param>
            <param name="WillTopic">Topic to publish the last will and testament, in case the connection drops unexpectedly.</param>
            <param name="WillQoS">Quality of Service of last will and testament, in case the connection drops unexpectedly.</param>
            <param name="WillRetain">If last will and testament should be retained, in case the connection drops unexpectedly.</param>
            <param name="WillData">Data of last will and testament, in case the connection drops unexpectedly.</param>
            <param name="Sniffers">Sniffers to use.</param>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.Reconnect">
            <summary>
            Reconnects a client after an error or if it's offline. Reconnecting, instead of creating a completely new connection,
            saves time.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.PING">
            <summary>
            Sends a PING message to the server. This is automatically done to keep the connection alive. Only call this method
            if you want to send additional PING messages, apart from the ones sent to keep the connection alive.
            </summary>
        </member>
        <member name="E:Waher.Networking.MQTT.MqttClient.OnConnectionError">
            <summary>
            Event raised when a connection to a broker could not be made.
            </summary>
        </member>
        <member name="E:Waher.Networking.MQTT.MqttClient.OnError">
            <summary>
            Event raised when an error was encountered.
            </summary>
        </member>
        <member name="E:Waher.Networking.MQTT.MqttClient.OnPing">
            <summary>
            Event raised whenever a ping message is sent, i.e. when connection is idle.
            </summary>
        </member>
        <member name="E:Waher.Networking.MQTT.MqttClient.OnPingResponse">
            <summary>
            Event raised whenever a ping response is received, i.e. when connection is kept active, while idle.
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttClient.Host">
            <summary>
            Host or IP address of MQTT server.
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttClient.Port">
            <summary>
            Port number to connect to.
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttClient.Tls">
            <summary>
            If encryption is to be used or not.
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttClient.TrustServer">
            <summary>
            If server should be trusted, regardless if the operating system could validate its certificate or not.
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttClient.ClientId">
            <summary>
            Client ID
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttClient.ServerCertificate">
            <summary>
            Certificate used by the server.
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttClient.ServerCertificateValid">
            <summary>
            If the server certificate is valid.
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttClient.State">
            <summary>
            Current state of connection.
            </summary>
        </member>
        <member name="E:Waher.Networking.MQTT.MqttClient.OnStateChanged">
            <summary>
            Event raised whenever the internal state of the connection changes.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.PUBLISH(System.String,Waher.Networking.MQTT.MqttQualityOfService,System.Boolean,System.Byte[])">
            <summary>
            Publishes information on a topic.
            </summary>
            <param name="Topic">Topic name</param>
            <param name="QoS">Quality of service</param>
            <param name="Retain">If topic should retain information.</param>
            <param name="Data">Binary data to send.</param>
            <returns>Packet identifier assigned to data.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.PUBLISH(System.String,Waher.Networking.MQTT.MqttQualityOfService,System.Boolean,Waher.Networking.MQTT.BinaryOutput)">
            <summary>
            Publishes information on a topic.
            </summary>
            <param name="Topic">Topic name</param>
            <param name="QoS">Quality of service</param>
            <param name="Retain">If topic should retain information.</param>
            <param name="Data">Binary data to send.</param>
            <returns>Packet identifier assigned to data.</returns>
        </member>
        <member name="E:Waher.Networking.MQTT.MqttClient.OnPublished">
            <summary>
            Event raised when data has been successfully published.
            </summary>
        </member>
        <member name="E:Waher.Networking.MQTT.MqttClient.OnSubscribed">
            <summary>
            Event raised when subscription has been successfully received.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.SUBSCRIBE(System.String,Waher.Networking.MQTT.MqttQualityOfService)">
            <summary>
            Subscribes to information from a topic. Topics can include wildcards.
            </summary>
            <param name="Topic">Topic string.</param>
            <param name="QoS">Quality of Service.</param>
            <returns>Packet identifier assigned to subscription.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.SUBSCRIBE(System.String[])">
            <summary>
            Subscribes to information from a set of topics. Topics can include wildcards.
            </summary>
            <param name="Topics">Topics</param>
            <returns>Packet identifier assigned to subscription.</returns>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.SUBSCRIBE(System.Collections.Generic.KeyValuePair{System.String,Waher.Networking.MQTT.MqttQualityOfService}[])">
            <summary>
            Subscribes to information from a set of topics. Topics can include wildcards.
            </summary>
            <param name="Topics">Topics together with Quality of Service levels for each topic.</param>
            <returns>Packet identifier assigned to subscription.</returns>
        </member>
        <member name="E:Waher.Networking.MQTT.MqttClient.OnContentReceived">
            <summary>
            Event raised when new content has been received.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.UNSUBSCRIBE(System.String[])">
            <summary>
            Unsubscribes from information earlier subscribed to. Topics can include wildcards.
            </summary>
            <param name="Topics">Topics</param>
            <returns>Packet identifier assigned to unsubscription.</returns>
        </member>
        <member name="E:Waher.Networking.MQTT.MqttClient.OnUnsubscribed">
            <summary>
            Event raised when unsubscription has been successfully received.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.Dispose">
            <summary>
            Closes the connection and disposes of all resources.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttClient.DisposeAsync">
            <summary>
            Closes the connection and disposes of all resources.
            </summary>
        </member>
        <member name="T:Waher.Networking.MQTT.MqttContent">
            <summary>
            Information about content received from the MQTT server.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttContent.#ctor(Waher.Networking.MQTT.MqttHeader,System.String,System.Byte[])">
            <summary>
            Information about content received from the MQTT server.
            </summary>
            <param name="Header">MQTT Header</param>
            <param name="Topic">Topic</param>
            <param name="Data">Binary Data</param>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttContent.Header">
            <summary>
            MQTT Header
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttContent.Topic">
            <summary>
            Topic
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttContent.Data">
            <summary>
            Binary Data
            </summary>
        </member>
        <member name="P:Waher.Networking.MQTT.MqttContent.DataInput">
            <summary>
            Data stream that can be used to parse incoming data.
            </summary>
        </member>
        <member name="T:Waher.Networking.MQTT.MqttControlPacketType">
            <summary>
            Enumeration of MQTT Control Packet types.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.CONNECT">
            <summary>
            Client to Server.
            Client request to connect to Server
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.CONNACK">
            <summary>
            Server to Client
            Connect acknowledgment
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.PUBLISH">
            <summary>
            Client to Server or Server to Client
            Publish message
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.PUBACK">
            <summary>
            Client to Server or Server to Client 
            Publish acknowledgment
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.PUBREC">
            <summary>
            Client to Server or Server to Client 
            Publish received (assured delivery part 1)
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.PUBREL">
            <summary>
            Client to Server or Server to Client 
            Publish release (assured delivery part 2)
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.PUBCOMP">
            <summary>
            Client to Server or Server to Client  
            Publish complete (assured delivery part 3)
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.SUBSCRIBE">
            <summary>
            Client to Server
            Client subscribe request
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.SUBACK">
            <summary>
            Server to Client
            Subscribe acknowledgment
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.UNSUBSCRIBE">
            <summary>
            Client to Server
            Unsubscribe request
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.UNSUBACK">
            <summary>
            Server to Client
            Unsubscribe acknowledgment
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.PINGREQ">
            <summary>
            Client to Server
            PING request
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.PINGRESP">
            <summary>
            Server to Client 
            PING response
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttControlPacketType.DISCONNECT">
            <summary>
            Client to Server
            Client is disconnecting
            </summary>
        </member>
        <member name="T:Waher.Networking.MQTT.MqttHeader">
            <summary>
            Contains information in the MQTT header.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttHeader.ControlPacketType">
            <summary>
            Control packet type.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttHeader.QualityOfService">
            <summary>
            Quality of Service level.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttHeader.Retain">
            <summary>
            Retain flag.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttHeader.Duplicate">
            <summary>
            Duplicate delivery flag.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttHeader.RemainingLength">
            <summary>
            The Remaining Length is the number of bytes remaining within the current packet, including data in the 
            variable header and the payload. The Remaining Length does not include the bytes used to encode the Remaining Length.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttHeader.PacketIdentifier">
            <summary>
            The variable header component of many of the Control Packet types includes a 2 byte Packet Identifier field.
            </summary>
        </member>
        <member name="M:Waher.Networking.MQTT.MqttHeader.Parse(Waher.Networking.MQTT.BinaryInput)">
            <summary>
            Parses a header.
            </summary>
            <param name="Input">Binary input.</param>
            <returns>Header.</returns>
        </member>
        <member name="T:Waher.Networking.MQTT.MqttQualityOfService">
            <summary>
            MQTT Quality of Service level.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttQualityOfService.AtMostOnce">
            <summary>
            The message is delivered according to the capabilities of the underlying network. 
            No response is sent by the receiver and no retry is performed by the sender. 
            The message arrives at the receiver either once or not at all. 
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttQualityOfService.AtLeastOnce">
            <summary>
            This quality of service ensures that the message arrives at the receiver at least once. 
            A QoS 1 PUBLISH Packet has a Packet Identifier in its variable header and is acknowledged 
            by a PUBACK Packet. Section 2.3.1 provides more information about Packet Identifiers.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttQualityOfService.ExactlyOnce">
            <summary>
            This is the highest quality of service, for use when neither loss nor duplication of messages are acceptable.
            There is an increased overhead associated with this quality of service.
            A QoS 2 message has a Packet Identifier in its variable header. Section 2.3.1 provides more information about 
            Packet Identifiers. The receiver of a QoS 2 PUBLISH Packet acknowledges receipt with a two-step acknowledgement process. 
            </summary>
        </member>
        <member name="T:Waher.Networking.MQTT.MqttState">
            <summary>
            State of MQTT connection.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttState.Offline">
            <summary>
            Offline
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttState.Connecting">
            <summary>
            Connecting to broker.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttState.StartingEncryption">
            <summary>
            Switching to encrypted channel
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttState.Authenticating">
            <summary>
            Performing initial handshake.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttState.Connected">
            <summary>
            Connected.
            </summary>
        </member>
        <member name="F:Waher.Networking.MQTT.MqttState.Error">
            <summary>
            In an error state.
            </summary>
        </member>
    </members>
</doc>