install

#!/usr/bin/env bash

set -eux

source $SNAP/actions/common/utils.sh

if [ -f "${SNAP_DATA}/var/lock/installed.lock" ]
then
  exit 0
fi

use_snap_env

# LXD Specific Checks
if ! is_strict && cat /proc/1/environ | grep "container=lxc" &> /dev/null
  then

  # make sure the /dev/kmsg is available, indicating a potential missing profile
  if [ ! -c "/dev/kmsg" ]  # kmsg is a character device
  then
    printf -- '\e[1;31mERROR: \033[0m the lxc profile for MicroK8s might be missing. \n'
    printf -- '\t  Refer to this help document to get MicroK8s working in with LXD: \n'
    printf -- '\t  https://microk8s.io/docs/lxd \n'
    exit 1
  fi
fi

mkdir -p ${SNAP_DATA}/args
cp -r --preserve=mode ${SNAP}/default-args/* ${SNAP_DATA}/args
mv ${SNAP_DATA}/args/certs.d/localhost__32000 ${SNAP_DATA}/args/certs.d/localhost:32000

SNAP_DATA_CURRENT=`echo "${SNAP_DATA}" | sed -e "s,${SNAP_REVISION},current,"`

# Try to symlink /var/lib/kubelet so that most kubelet device plugins work out of the box.
if ! [ -e /var/lib/kubelet ] && ln -s $SNAP_COMMON/var/lib/kubelet /var/lib/kubelet; then
  echo "/var/lib/kubelet linked to $SNAP_COMMON"
fi

# Try to symlink /var/lib/calico so that the Calico CNI plugin picks up the mtu configuration.
if ! [ -e /var/lib/calico ]; then
  if ln -s $SNAP_DATA_CURRENT/var/lib/calico /var/lib/calico; then
    echo "/var/lib/calico linked to $SNAP_DATA_CURRENT/var/lib/calico"
  fi
fi

# Try to symlink standard CNI Kubernetes directories.
if ! [ -e /etc/cni/net.d ]; then
  if mkdir -p /etc/cni && ln -s $SNAP_DATA_CURRENT/args/cni-network /etc/cni/net.d; then
    echo "/etc/cni/net.d linked to $SNAP_DATA_CURRENT/args/cni-network"
  fi
fi
if ! [ -e /opt/cni/bin ]; then
  if mkdir -p /opt/cni && ln -s $SNAP_DATA_CURRENT/opt/cni/bin /opt/cni/bin; then
    echo "/opt/cni/bin linked to $SNAP_DATA_CURRENT/opt/cni/bin"
  fi
fi

# Create the credentials directory
mkdir -p ${SNAP_DATA}/credentials

# Create the certificates
mkdir ${SNAP_DATA}/certs
# Allow the ability to add external IPs to the csr, by moving the csr.conf.template to SNAP_DATA
cp ${SNAP}/certs/csr.conf.template ${SNAP_DATA}/certs/csr.conf.template

# Copy initial configuration from well-known paths.
# This is done prior to any other initialization.
#
# The following paths are checked in order for a config file.
# Only the first file found will be used, the rest will be ignored.
#
# - /etc/microk8s.yaml                <-- user-defined config file
# - $SNAP_USER_COMMON/.microk8s.yaml  <-- user-defined config file, typically in /root/snap/microk8s/common/.microk8s.yaml
# - $SNAP_COMMON/.microk8s.yaml       <-- user-defined config file, typically in /var/snap/microk8s/common/.microk8s.yaml
# - $SNAP/microk8s.default.yaml       <-- default config file bundled with the snap
#
# If the pre-init step fails, the snap installation will fail, as it is considered to be a user error.
mkdir -p "${SNAP_COMMON}/etc/launcher"
for config_file in "/etc/microk8s.yaml" "$SNAP_USER_COMMON/.microk8s.yaml" "$SNAP_COMMON/.microk8s.yaml" "$SNAP/microk8s.default.yaml"; do
  if [ -f "${config_file}" ]; then
    echo "Found config file ${config_file}, will use to initialize cluster."

    if cp "${config_file}" "${SNAP_COMMON}/etc/launcher/install.yaml"; then
      "${SNAP}/bin/cluster-agent" init --pre-init --config-file "${SNAP_COMMON}/etc/launcher/install.yaml"
      break
    fi
  fi
done

# Side-load images from well-known paths.
# This is done prior to any other initialization.
#
# Any *.tar files that are found in these directories will be loaded into containerd after it starts.
#
# - $SNAP_USER_COMMON/sideload/*.tar  <-- typically /root/snap/microk8s/common/sideload/images.tar
# - $SNAP_COMMON/sideload/*.tar       <-- typically /var/snap/microk8s/common/sideload/images.tar
# - $SNAP/sideload/*.tar              <-- typically empty, reserved for future use-cases
mkdir -p "${SNAP_COMMON}/etc/sideload"
for source_dir in "${SNAP_USER_COMMON}" "${SNAP_COMMON}" "${SNAP}"; do
  cp "${source_dir}/sideload/"*.tar "${SNAP_COMMON}/etc/sideload/" || true
done

# Produce cluster certificates
produce_certs
rm -rf .srl

create_user_certs_and_configs

# Install default-hooks
cp -r --preserve=mode ${SNAP}/default-hooks ${SNAP_COMMON}/hooks

for dir in ${SNAP_DATA}/credentials/ ${SNAP_DATA}/certs/ ${SNAP_DATA}/args/ ${SNAP_COMMON}/hooks
do
  chmod -R ug+rwX ${dir}
  chmod -R o-rwX ${dir}
done

if is_strict && snapctl is-connected k8s-kubelet
then
  snapctl restart microk8s.daemon-containerd
fi

init_cluster

mkdir -p "${SNAP_DATA}/var/lock"
set_service_not_expected_to_start etcd
set_service_not_expected_to_start flanneld
set_service_not_expected_to_start apiserver-proxy

touch "${SNAP_DATA}/var/lock/ha-cluster"
touch "${SNAP_DATA}/var/lock/lite.lock"

RESOURCES="${SNAP}/upgrade-scripts/000-switch-to-calico/resources"
BACKUP_DIR="${SNAP_DATA}/var/tmp/upgrades/000-switch-to-calico"

mkdir -p "${BACKUP_DIR}"

mkdir -p "${BACKUP_DIR}/args/cni-network/"
cp "${SNAP_DATA}"/args/cni-network/* "${BACKUP_DIR}/args/cni-network/" 2>/dev/null || true
rm -rf "${SNAP_DATA}"/args/cni-network/*
${SNAP}/scripts/generate-cni.sh
mkdir -p "$SNAP_DATA/opt/cni/bin/"
cp -R "$SNAP"/opt/cni/bin/* "$SNAP_DATA"/opt/cni/bin/

# Low memory guard. Enable by default when system RAM is less than 512MB.
MEMORY=`cat /proc/meminfo | grep MemTotal | awk '{ print $2 }'`
if [ $MEMORY -le 524288 ]
then
  touch ${SNAP_DATA}/var/lock/low-memory-guard.lock
fi

# copy git config
mkdir -p ${SNAP_DATA}/args/git
cp ${SNAP}/default-args/git/.gitconfig  ${SNAP_DATA}/args/git/.gitconfig

touch "${SNAP_DATA}/var/lock/installed.lock"