修改默认编译MeIsReallyBa的4.4源码

修改KERNEL: 4.4为KERNEL: 3.4可以编译3.4内核的源码

Author: chongshengB

.github/workflows/build-padavan.yml

@@ -1,4 +1,4 @@
-#修改TNAME: K2P-5.0 中的K2P-5.0为你需要编译的型号，注意名称要与configs/templates/目录下的名字相同
+#修改TNAME: K2P 中的K2P为你需要编译的型号，注意名称要与configs/templates/目录下的名字相同
 name: Build Padavan
 
 on: 
@@ -32,13 +32,18 @@ jobs:
         pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget
     - name: Clone source code
       run: |
+        if [ $KERNEL = "4.4" ] ; then
+        git clone --depth=1 https://github.com/MeIsReallyBa/padavan-4.4.git /opt/rt-n56u
+        else
         git clone --depth=1 https://github.com/chongshengB/rt-n56u.git /opt/rt-n56u
+        fi
         cd /opt/rt-n56u/toolchain-mipsel
         sh dl_toolchain.sh
         mkdir -p /opt/images/
     - name: Build Firmware
       env:
-        TNAME: K2P-5.0
+        TNAME: K2P
+        KERNEL: 4.4
       run: |
         cd /opt/rt-n56u/trunk
         if [ ! -f configs/templates/$TNAME.config ] ; then
@@ -66,6 +71,21 @@ jobs:
         ######################################################################
         #以下选项是定义你需要的功能（y=集成,n=忽略），重新写入到.config文件
         ######################################################################
+        if [ $KERNEL = "4.4" ] ; then
+        echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST
+        echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT
+        echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #SS plus+
+        echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config # simple-obfs混淆插件
+        echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=y" >> .config #adbyby plus+
+        echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n" >> .config #DNSFORWARDER
+        echo "CONFIG_FIRMWARE_INCLUDE_SRELAY=n" >> .config #可以不集成
+        echo "CONFIG_FIRMWARE_INCLUDE_XRAY=y" >> .config #集成xray执行文件  ~4.5M
+        echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=n" >> .config #集成v2ray执行文件
+        echo "CONFIG_FIRMWARE_INCLUDE_DDNSTO=y" >> .config #ddnsto  ~0.5M
+        echo "CONFIG_FIRMWARE_INCLUDE_ALDRIVER=n" >> .config  #阿里云盘  ~3m
+        echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=n" >> .config #zerotier ~1.3M
+        echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=y" >> .config #aliddns
+        else
         echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST
         echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT
         echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #SS plus+
@@ -89,6 +109,7 @@ jobs:
         echo "CONFIG_FIRMWARE_INCLUDE_WYY=y" >> .config #网易云解锁
         echo "CONFIG_FIRMWARE_INCLUDE_WYYBIN=n" >> .config #网易云解锁GO版本执行文件（4M多）注意固件超大小,不集成会自动下载
         echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=n" >> .config #zerotier ~1.3M
+        fi
         #########################################################################################
         #自定义添加其它功能请参考源码configs/templates/目录下的config文件。按照上面的格式添加即可
         #格式如下：