diff --git a/.github/workflows/build-padavan.yml b/.github/workflows/build-padavan.yml
index 3af88b853c..67acbbd5a1 100644
--- a/.github/workflows/build-padavan.yml
+++ b/.github/workflows/build-padavan.yml
@@ -16,7 +16,7 @@ on:
 
 jobs:
   build:
-    runs-on: ubuntu-18.04
+    runs-on: ubuntu-22.04
     if: github.event.repository.owner.id == github.event.sender.id
 
     steps:
@@ -27,100 +27,35 @@ jobs:
         DEBIAN_FRONTEND: noninteractive
       run: |
         sudo apt-get update
-        sudo apt-get -y install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd fakeroot \
-        cpio git python-docutils gettext automake autopoint texinfo build-essential help2man \
-        pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget
+        sudo apt-get -y install autoconf autoconf-archive automake autopoint bison build-essential ca-certificates cmake cpio curl doxygen fakeroot flex gawk gettext git gperf help2man htop kmod libblkid-dev libc-ares-dev libcurl4-openssl-dev libdevmapper-dev libev-dev libevent-dev libexif-dev libflac-dev libgmp3-dev libid3tag0-dev libjpeg-dev libkeyutils-dev libltdl-dev libmpc-dev libmpfr-dev libncurses5-dev libogg-dev libsqlite3-dev libssl-dev libtool libtool-bin libudev-dev libvorbis-dev libxml2-dev locales mc nano pkg-config ppp-dev python3 python3-docutils texinfo unzip uuid uuid-dev vim wget xxd zlib1g-dev
     - name: Clone source code
       env:
         KERNEL: 3.4
       run: |
         if [ $KERNEL = "4.4" ] ; then
-        git clone --depth=1 https://github.com/MeIsReallyBa/padavan-4.4.git /opt/rt-n56u
+        git clone --depth=1 https://github.com/yangqing77/padavan1.git /opt/rt-n56u
         else
-        git clone --depth=1 https://github.com/chongshengB/rt-n56u.git /opt/rt-n56u
+        git clone --depth=1 https://github.com/yangqing77/padavan1.git /opt/rt-n56u
         fi
-        cd /opt/rt-n56u/toolchain-mipsel
+        #cd /opt/rt-n56u/toolchain-mipsel
+        cd /opt/rt-n56u/toolchain
         sh dl_toolchain.sh
         mkdir -p /opt/images/
     - name: Build Firmware
       env:
-        TNAME: K2P
+        TNAME: tl_c5-v4
         KERNEL: 3.4
       run: |
         cd /opt/rt-n56u/trunk
-        if [ ! -f configs/templates/$TNAME.config ] ; then
+        if [ ! -f configs/templates/tplink/$TNAME.config ] ; then
         echo "configs/templates/$TNAME.config not found "
         exit 1
         fi
-        cp -f configs/templates/$TNAME.config .config
+        cp -f configs/templates/tplink/$TNAME.config .config
         sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config
-        ################################################################################################
-        #因不同型号配置功能不一样，所以先把配置项删除，如果你自己要添加其他的，也要写上删除这一条，切记！！！
-        ################################################################################################
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_MENTOHUST/d' .config #删除配置项MENTOHUST
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT/d' .config #删除配置项SCUTCLIENT
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS/d' .config #删除配置项SS plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SSSERVER/d' .config #删除配置项SS server
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER/d' .config #删除配置项DNSFORWARDER
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_ADBYBY/d' .config #删除配置项adbyby plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPC/d' .config #删除配置项adbyby plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPS/d' .config #删除配置项adbyby plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_TUNSAFE/d' .config #删除配置项adbyby plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_ALIDDNS/d' .config #删除配置项阿里DDNS
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SMARTDNS/d' .config
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SRELAY/d' .config
-        sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config
-        ######################################################################
-        #以下选项是定义你需要的功能（y=集成,n=忽略），重新写入到.config文件
-        ######################################################################
-        if [ $KERNEL = "4.4" ] ; then
-        echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST
-        echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT
-        echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #SS plus+
-        echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config # simple-obfs混淆插件
-        echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=y" >> .config #adbyby plus+
-        echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n" >> .config #DNSFORWARDER
-        echo "CONFIG_FIRMWARE_INCLUDE_SRELAY=n" >> .config #可以不集成
-        echo "CONFIG_FIRMWARE_INCLUDE_XRAY=y" >> .config #集成xray执行文件  ~4.5M
-        echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=n" >> .config #集成v2ray执行文件
-        echo "CONFIG_FIRMWARE_INCLUDE_DDNSTO=y" >> .config #ddnsto  ~0.5M
-        echo "CONFIG_FIRMWARE_INCLUDE_ALDRIVER=n" >> .config  #阿里云盘  ~3m
-        echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=n" >> .config #zerotier ~1.3M
-        echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=y" >> .config #aliddns
-        else
-        echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST
-        echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT
-        echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #SS plus+
-        echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config # simple-obfs混淆插件
-        echo "CONFIG_FIRMWARE_INCLUDE_SSSERVER=n" >> .config #SS server
-        echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n" >> .config #DNSFORWARDER
-        echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=y" >> .config #adbyby plus+
-        echo "CONFIG_FIRMWARE_INCLUDE_FRPC=n" >> .config #内网穿透FRPC
-        echo "CONFIG_FIRMWARE_INCLUDE_FRPS=n" >> .config #内网穿透FRPS
-        echo "CONFIG_FIRMWARE_INCLUDE_TUNSAFE=n" >> .config #TUNSAFE
-        echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=y" >> .config #阿里DDNS
-        echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNS=y" >> .config #smartdns
-        echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNSBIN=y" >> .config #smartdns二进制文件
-        echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=n" >> .config #集成v2ray执行文件（3.8M左右)，如果不集成，会从网上下载下来执行，不影响正常使用
-        echo "CONFIG_FIRMWARE_INCLUDE_TROJAN=n" >> .config #集成trojan执行文件(1.1M左右)，如果不集成，会从网上下载下来执行，不影响正常使用
-        echo "CONFIG_FIRMWARE_INCLUDE_KOOLPROXY=y" >> .config #KP广告过滤
-        echo "CONFIG_FIRMWARE_INCLUDE_CADDY=y" >> .config #在线文件管理服务
-        echo "CONFIG_FIRMWARE_INCLUDE_CADDYBIN=n" >> .config #集成caddu执行文件，此文件有13M,请注意固件大小。如果不集成，会从网上下载下来执行，不影响正常使用
-        echo "CONFIG_FIRMWARE_INCLUDE_ADGUARDHOME=y" >> .config
-        echo "CONFIG_FIRMWARE_INCLUDE_SRELAY=n" >> .config #可以不集成
-        echo "CONFIG_FIRMWARE_INCLUDE_WYY=y" >> .config #网易云解锁
-        echo "CONFIG_FIRMWARE_INCLUDE_WYYBIN=n" >> .config #网易云解锁GO版本执行文件（4M多）注意固件超大小,不集成会自动下载
-        echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=n" >> .config #zerotier ~1.3M
-        fi
-        #########################################################################################
-        #自定义添加其它功能请参考源码configs/templates/目录下的config文件。按照上面的格式添加即可
-        #格式如下：
-        #sed -i '/自定义项/d' .config
-        #echo "自定义项=y" >> .config
-        #########################################################################################
-        sudo ./clear_tree
-        sudo ./build_firmware_modify $TNAME 0
-        sudo mv -f images/*.trx /opt/images/
+        sudo ./clear_tree.sh
+        sudo ./build_firmware_modify.sh
+        sudo mv -f images/*.bin /opt/images/
     - name : Upload packages
       uses: actions/upload-artifact@master
       if: always()