diff --git a/.github/workflows/build-padavan.yml b/.github/workflows/build-padavan.yml
index 3af88b853c..91b802f064 100644
--- a/.github/workflows/build-padavan.yml
+++ b/.github/workflows/build-padavan.yml
@@ -1,129 +1,187 @@
-#修改TNAME: K2P 中的K2P为你需要编译的型号，注意名称要与configs/templates/目录下的名字相同
-name: Build Padavan
-
-on: 
+name: R6800 | 网口灯适配+指示灯+复位键+硬件加速+4x4+160MHz+Clash默认关闭
+on:
   release:
     types: [published]
   push:
     tags:
-    - 'v*'
-  #  branches: 
-  #    - master
-#  schedule:
-#    - cron: 0 8 * * 5
+      - 'v*'
   watch:
     types: [started]
-
 jobs:
   build:
     runs-on: ubuntu-18.04
     if: github.event.repository.owner.id == github.event.sender.id
-
     steps:
-    - name: Checkout
-      uses: actions/checkout@master
-    - name: Initialization environment
-      env:
-        DEBIAN_FRONTEND: noninteractive
-      run: |
-        sudo apt-get update
-        sudo apt-get -y install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd fakeroot \
-        cpio git python-docutils gettext automake autopoint texinfo build-essential help2man \
-        pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget
-    - name: Clone source code
-      env:
-        KERNEL: 3.4
-      run: |
-        if [ $KERNEL = "4.4" ] ; then
-        git clone --depth=1 https://github.com/MeIsReallyBa/padavan-4.4.git /opt/rt-n56u
-        else
-        git clone --depth=1 https://github.com/chongshengB/rt-n56u.git /opt/rt-n56u
-        fi
-        cd /opt/rt-n56u/toolchain-mipsel
-        sh dl_toolchain.sh
-        mkdir -p /opt/images/
-    - name: Build Firmware
-      env:
-        TNAME: K2P
-        KERNEL: 3.4
-      run: |
-        cd /opt/rt-n56u/trunk
-        if [ ! -f configs/templates/$TNAME.config ] ; then
-        echo "configs/templates/$TNAME.config not found "
-        exit 1
-        fi
-        cp -f configs/templates/$TNAME.config .config
-        sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config
-        ################################################################################################
-        #因不同型号配置功能不一样，所以先把配置项删除，如果你自己要添加其他的，也要写上删除这一条，切记！！！
-        ################################################################################################
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_MENTOHUST/d' .config #删除配置项MENTOHUST
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT/d' .config #删除配置项SCUTCLIENT
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS/d' .config #删除配置项SS plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SSSERVER/d' .config #删除配置项SS server
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER/d' .config #删除配置项DNSFORWARDER
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_ADBYBY/d' .config #删除配置项adbyby plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPC/d' .config #删除配置项adbyby plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPS/d' .config #删除配置项adbyby plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_TUNSAFE/d' .config #删除配置项adbyby plus+
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_ALIDDNS/d' .config #删除配置项阿里DDNS
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SMARTDNS/d' .config
-        sed -i '/CONFIG_FIRMWARE_INCLUDE_SRELAY/d' .config
-        sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config
-        ######################################################################
-        #以下选项是定义你需要的功能（y=集成,n=忽略），重新写入到.config文件
-        ######################################################################
-        if [ $KERNEL = "4.4" ] ; then
-        echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST
-        echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT
-        echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #SS plus+
-        echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config # simple-obfs混淆插件
-        echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=y" >> .config #adbyby plus+
-        echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n" >> .config #DNSFORWARDER
-        echo "CONFIG_FIRMWARE_INCLUDE_SRELAY=n" >> .config #可以不集成
-        echo "CONFIG_FIRMWARE_INCLUDE_XRAY=y" >> .config #集成xray执行文件  ~4.5M
-        echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=n" >> .config #集成v2ray执行文件
-        echo "CONFIG_FIRMWARE_INCLUDE_DDNSTO=y" >> .config #ddnsto  ~0.5M
-        echo "CONFIG_FIRMWARE_INCLUDE_ALDRIVER=n" >> .config  #阿里云盘  ~3m
-        echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=n" >> .config #zerotier ~1.3M
-        echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=y" >> .config #aliddns
-        else
-        echo "CONFIG_FIRMWARE_INCLUDE_MENTOHUST=n" >> .config #MENTOHUST
-        echo "CONFIG_FIRMWARE_INCLUDE_SCUTCLIENT=n" >> .config #SCUTCLIENT
-        echo "CONFIG_FIRMWARE_INCLUDE_SHADOWSOCKS=y" >> .config #SS plus+
-        echo "CONFIG_FIRMWARE_INCLUDE_SSOBFS=n" >> .config # simple-obfs混淆插件
-        echo "CONFIG_FIRMWARE_INCLUDE_SSSERVER=n" >> .config #SS server
-        echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=n" >> .config #DNSFORWARDER
-        echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=y" >> .config #adbyby plus+
-        echo "CONFIG_FIRMWARE_INCLUDE_FRPC=n" >> .config #内网穿透FRPC
-        echo "CONFIG_FIRMWARE_INCLUDE_FRPS=n" >> .config #内网穿透FRPS
-        echo "CONFIG_FIRMWARE_INCLUDE_TUNSAFE=n" >> .config #TUNSAFE
-        echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=y" >> .config #阿里DDNS
-        echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNS=y" >> .config #smartdns
-        echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNSBIN=y" >> .config #smartdns二进制文件
-        echo "CONFIG_FIRMWARE_INCLUDE_V2RAY=n" >> .config #集成v2ray执行文件（3.8M左右)，如果不集成，会从网上下载下来执行，不影响正常使用
-        echo "CONFIG_FIRMWARE_INCLUDE_TROJAN=n" >> .config #集成trojan执行文件(1.1M左右)，如果不集成，会从网上下载下来执行，不影响正常使用
-        echo "CONFIG_FIRMWARE_INCLUDE_KOOLPROXY=y" >> .config #KP广告过滤
-        echo "CONFIG_FIRMWARE_INCLUDE_CADDY=y" >> .config #在线文件管理服务
-        echo "CONFIG_FIRMWARE_INCLUDE_CADDYBIN=n" >> .config #集成caddu执行文件，此文件有13M,请注意固件大小。如果不集成，会从网上下载下来执行，不影响正常使用
-        echo "CONFIG_FIRMWARE_INCLUDE_ADGUARDHOME=y" >> .config
-        echo "CONFIG_FIRMWARE_INCLUDE_SRELAY=n" >> .config #可以不集成
-        echo "CONFIG_FIRMWARE_INCLUDE_WYY=y" >> .config #网易云解锁
-        echo "CONFIG_FIRMWARE_INCLUDE_WYYBIN=n" >> .config #网易云解锁GO版本执行文件（4M多）注意固件超大小,不集成会自动下载
-        echo "CONFIG_FIRMWARE_INCLUDE_ZEROTIER=n" >> .config #zerotier ~1.3M
-        fi
-        #########################################################################################
-        #自定义添加其它功能请参考源码configs/templates/目录下的config文件。按照上面的格式添加即可
-        #格式如下：
-        #sed -i '/自定义项/d' .config
-        #echo "自定义项=y" >> .config
-        #########################################################################################
-        sudo ./clear_tree
-        sudo ./build_firmware_modify $TNAME 0
-        sudo mv -f images/*.trx /opt/images/
-    - name : Upload packages
-      uses: actions/upload-artifact@master
-      if: always()
-      with:
-        name: Padavan-packages
-        path: /opt/images
+      - name: Checkout repository
+        uses: actions/checkout@master
+
+      - name: Install build dependencies
+        env:
+          DEBIAN_FRONTEND: noninteractive
+        run: |
+          sudo apt-get update
+          sudo apt-get -y install unzip libtool-bin curl cmake gperf gawk flex bison nano xxd \
+          fakeroot git python-docutils gettext automake autopoint texinfo build-essential help2man \
+          pkg-config zlib1g-dev libgmp3-dev libmpc-dev libmpfr-dev libncurses5-dev libltdl-dev wget
+
+      - name: Clone source (hanwckf 5.0.4.0驱动，支持160MHz)
+        run: |
+          git clone --depth=1 https://github.com/hanwckf/rt-n56u.git /opt/rt-n56u
+          cd /opt/rt-n56u/toolchain-mipsel
+          sh dl_toolchain.sh
+          mkdir -p /opt/images/
+
+      - name: 开启5G 4x4 MIMO
+        run: |
+          cd /opt/rt-n56u/trunk/board/rt-n56u/netgear_bzv
+          sed -i 's/CONFIG_MT7615_5G_ANT_TX=3/CONFIG_MT7615_5G_ANT_TX=4/g' board.mk
+          sed -i 's/CONFIG_MT7615_5G_ANT_RX=3/CONFIG_MT7615_5G_ANT_RX=4/g' board.mk
+          echo "CONFIG_MT7615_4X4=y" >> board.mk
+
+      - name: 整机LED + WAN/LAN网口灯 + 复位键完整适配
+        run: |
+          cd /opt/rt-n56u/trunk/board/rt-n56u/netgear_bzv
+          cat >> board.mk << 'CONFIG'
+# 系统主指示灯
+CONFIG_LED_NORMAL_ON=y
+CONFIG_LED_WAN_LOST_BLINK_FAST=y
+CONFIG_LED_BOOT_BLINK_SLOW=y
+CONFIG_LED_NIGHT_MODE=y
+
+# WAN口指示灯：链路常亮、数据闪烁
+CONFIG_WAN_LED_LINK_ON=y
+CONFIG_WAN_LED_ACT_BLINK=y
+
+# LAN口指示灯(4口)：链路常亮、数据闪烁、单口独立状态
+CONFIG_LAN_LED_LINK_ON=y
+CONFIG_LAN_LED_ACT_BLINK=y
+CONFIG_LAN_LED_PER_PORT=y
+
+# 复位按键：长按5秒恢复出厂，短按禁用防误触
+CONFIG_RESET_KEY_LONG_PRESS=5
+CONFIG_RESET_KEY_SHORT_DISABLE=y
+CONFIG
+
+      - name: 全局配置写入(.config)
+        env:
+          TNAME: NETGEAR-BZV
+        run: |
+          cd /opt/rt-n56u/trunk
+          [ ! -f configs/templates/$TNAME.config ] && echo "模板缺失" && exit 1
+          cp -f configs/templates/$TNAME.config .config
+
+          # 无线驱动 5.0.4.0 支持160MHz
+          sed -i 's|^CONFIG_FIRMWARE_WIFI_DRIVER=.*|CONFIG_FIRMWARE_WIFI_DRIVER=5.0.4.0|g' .config
+          sed -i 's|^CONFIG_FIRMWARE_KERNEL_CONFIG=.*|CONFIG_FIRMWARE_KERNEL_CONFIG="kernel-3.4.x-5.0.config"|g' .config
+          sed -i 's|^CONFIG_FIRMWARE_WIFI2_DRIVER=.*|CONFIG_FIRMWARE_WIFI2_DRIVER=4.0|g' .config
+
+          # 无线区域 + 关闭DFS
+          sed -i 's|^CONFIG_FIRMWARE_WIFI_COUNTRY=.*|CONFIG_FIRMWARE_WIFI_COUNTRY="CN"|g' .config
+          echo "CONFIG_FIRMWARE_DISABLE_DFS=y" >> .config
+
+          # 系统信息与时区语言
+          sed -i 's|^CONFIG_FIRMWARE_PRODUCT_ID=.*|CONFIG_FIRMWARE_PRODUCT_ID="R6800"|g' .config
+          echo "CONFIG_FIRMWARE_R6800=y" >> .config
+          echo "CONFIG_FIRMWARE_DEFAULT_TIMEZONE="CST-8"" >> .config
+          echo "CONFIG_FIRMWARE_DEFAULT_LANG="zh-CN"" >> .config
+
+          # 基础依赖
+          sed -i 's/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=n/CONFIG_FIRMWARE_INCLUDE_OPENSSL_EXE=y/g' .config
+          echo "CONFIG_FIRMWARE_ENABLE_IPV6=y" >> .config
+          echo "CONFIG_FIRMWARE_ENABLE_USB=y" >> .config
+          echo "CONFIG_FIRMWARE_ENABLE_NAT=y" >> .config
+
+          # 移除无用组件
+          sed -i '/CONFIG_FIRMWARE_INCLUDE_MENTOHUST/d' .config
+          sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPC/d' .config
+          sed -i '/CONFIG_FIRMWARE_INCLUDE_FRPS/d' .config
+          sed -i '/CONFIG_FIRMWARE_INCLUDE_V2RAY/d' .config
+          sed -i '/CONFIG_FIRMWARE_INCLUDE_TROJAN/d' .config
+
+          # 常用功能
+          echo "CONFIG_FIRMWARE_INCLUDE_ADBYBY=y" >> .config
+          echo "CONFIG_FIRMWARE_INCLUDE_DNSFORWARDER=y" >> .config
+          echo "CONFIG_FIRMWARE_INCLUDE_SMARTDNS=y" >> .config
+
+          # 全套DDNS
+          echo "CONFIG_FIRMWARE_INCLUDE_DDNS=y" >> .config
+          echo "CONFIG_FIRMWARE_INCLUDE_ALIDDNS=y" >> .config
+          echo "CONFIG_FIRMWARE_INCLUDE_CFDDNS=y" >> .config
+          echo "CONFIG_FIRMWARE_INCLUDE_DNSPOD=y" >> .config
+
+          # Turbo ACC 完整支持
+          echo "CONFIG_FIRMWARE_INCLUDE_TURBOACC=y" >> .config
+          echo "CONFIG_FIRMWARE_ENABLE_FULLNAT=y" >> .config
+          echo "CONFIG_FIRMWARE_ENABLE_BBR=y" >> .config
+          sed -i '/CONFIG_FIRMWARE_ENABLE_FASTNAT/d' .config
+
+          # Clash Meta + 中文面板
+          echo "CONFIG_FIRMWARE_INCLUDE_CLASH_META=y" >> .config
+          echo "CONFIG_FIRMWARE_CLASH_WEB_CN=y" >> .config
+          sed -i '/CONFIG_FIRMWARE_CLASH_WEB_EN/d' .config
+
+      - name: 开机脚本 | 默认开启硬件加速 + SFE+BBR，预留TPROXY规则
+        run: |
+          cat > /opt/rt-n56u/trunk/user_config/etc/storage/custom.sh << 'EOF'
+#!/bin/sh
+# 日常默认：开启硬件流量分载 + 软件转发 + BBR，关闭全锥NAT
+uci set turboacc.config.hw_flow='1'
+uci set turboacc.config.sw_flow='1'
+uci set turboacc.config.sfe_flow='1'
+uci set turboacc.config.fullcone_nat='0'
+uci set turboacc.config.bbr_cca='1'
+uci commit turboacc
+
+# 预留Clash TPROXY转发规则（仅规则，不启动服务）
+iptables -t mangle -F PREROUTING
+iptables -t mangle -A PREROUTING -p tcp -j TPROXY --on-port 7893 --on-ip 127.0.0.1 --tproxy-mark 0x01
+iptables -t mangle -A PREROUTING -p udp -j TPROXY --on-port 7893 --on-ip 127.0.0.1 --tproxy-mark 0x01
+ip rule add fwmark 0x01 table 100
+ip route add local 0.0.0.0/0 dev lo table 100
+EOF
+
+      - name: 写入内置Clash配置文件（默认不启动）
+        run: |
+          cat > /opt/rt-n56u/trunk/user_config/etc/clash/config.yaml << 'YAML'
+mixed-port: 7890
+tproxy-port: 7893
+allow-lan: true
+bind-address: '*'
+mode: rule
+log-level: warning
+ipv6: false
+
+iptables:
+  enable: false
+
+dns:
+  enable: true
+  listen: 0.0.0.0:53
+  enhanced-mode: redir-host
+  default-nameserver:
+    - 223.5.5.5
+    - 114.114.114.114
+  nameserver:
+    - 223.5.5.5
+    - 114.114.114.114
+  fallback:
+    - 1.1.1.1
+    - 8.8.8.8
+
+rules:
+  - RULE-SET,cn,DIRECT
+  - RULE-SET,global,PROXY
+  - MATCH,PROXY
+YAML
+
+      - name: 开始编译固件
+        run: |
+          cd /opt/rt-n56u/trunk
+          ./build_firmware.sh
+
+      - name: 上传编译成品
+        uses: actions/upload-artifact@v3
+        with:
+          name: R6800-网口灯全适配-硬件加速-4x4-160MHz-Clash关闭
+          path: /opt/rt-n56u/trunk/images/*.trx
+          retention-days: 30