docker-compose.yml

services:
  parkes:
    build: .
    image: parkes
    restart: unless-stopped
    ports:
      - "8000:8000"
      # SoapyRemote sharing (soapy_remote_bind_port) -- only needed if that
      # feature is turned on. mDNS-based discovery of it from a laptop
      # relies on the same L2 segment, which a bridge network doesn't
      # forward; use `network_mode: host` below instead if you need that.
      - "55132:55132"
      # rotctld, only reachable if its bind address is widened past
      # localhost on the Settings page (e.g. so gpredict on a laptop can
      # drive the dish too).
      - "4533:4533"
    volumes:
      # Everything stateful lives here (preferences, TLE/skyfield caches,
      # satdump output) -- see parkes/config.py. Must be writable by uid
      # 4213 (the "parkes" user baked into the Dockerfile) or the container
      # can't start: `sudo chown -R 4213:4213 ./data`.
      #- ./data:/app/data
      # or use a named volume
      - parkes-data:/app/data
    # Rotator serial + SDR USB access -- uncomment and point at your actual
    # devices (an empty `devices:` list is invalid, so the key itself is
    # commented out too). See docs/deploy.md for why by-id paths are
    # preferred over /dev/ttyUSB0.
    # devices:
    #   - /dev/serial/by-id/<rotator-id>:/dev/rotator
    #   - /dev/bus/usb:/dev/bus/usb
    # env_file: parkes.env  # PARKES_* fresh-deploy defaults, see parkes/config.py
    # network_mode: host  # alternative to the ports: list above, needed for SoapyRemote mDNS discovery on the LAN

volumes:
  parkes-data: