Debian 13 Upgrade for existing LXC - Testers wanted!

[CrazyWolf13]

Looking for Debian 13 Upgrade Testers

We are currently looking for testers for Debian 13 (Trixie) in our LXC scripts.
At this stage, support will most likely only work on Proxmox VE 9 (currently 9.0). Proxmox VE 8.x is not targeted for Debian 13 support.

Caution

The following post is intended as Beta-test, proceed with Caution and ensure full Backups are created.

The ideal commands we recommand to update a Debian 12 (Bookworm) LXC to Debian 13 Trixie:

What it does

This will install the latest updates, install screen (kinda like a virtual terminal) this makes sure the update continues to run even if the ssh session would get interrupted, the user can just run screen -r to re-attach to the update process.
After that it will rewrite the sources to Trixie and upgrade everything.
Then existin source files will be rewritten to the new deb822 format.

Caution

Proceed with Caution, this may break your LXC, so be sure to create proper Backups beforehand.

Important

Check out this thread for more info on what LXC have issues upgrading and keep up to date on their status:
#7332

apt update
apt install screen -y
apt upgrade -y

sed -i 's/bookworm/trixie/g' /etc/apt/sources.list
apt update

screen apt dist-upgrade
apt autoremove
apt autoclean
apt modernize-sources
apt update
reboot

Tip

After the upgrade the MOTD (Message displayed on SSH login, will still show Debian 12, check out this guide on how to regenerate it.
#7227

Note

For new installations of a LXC, check this thread:
#7485

Warning

Please only report the apps that don't work. as otherwise this discussion get's a bit flooded.
Thanks!

We would appreciate your feedback
Simply let us know which scripts are working and which are not.
We will continuously clean up and update this post based on your reports.

Thank you for helping us move Debian 13 support forward 🙌
CrazyWolf13 (Community-Scripts-Team)

[oOStroudyOo]

Here are my findings from my server, all of these apps are in separate LXCs..

These apps (LXCs) have been pre-built via the community script (These are not fresh installs), and run fine after updating from Debian 12 to Debian 13 after following the commands above:

• Radarr
• Docker
• Uptime Kuma
• Sonarr
• Emby
• Pulse
• Jellyseerr
• Mealie
• Cloudflared
• FileBrowser Quantum
• Tdarr
• Cross-Seed
• Notifiarr - (Update script fails, it returns No Notifiarr Installation Found!)
• Cleanuparr
• Planka
• Apt-Cacher-NG

Note: Except for Notifarr, the update script run successfully on all LXCs, however I didn't actually have any apps that required updating so this has not been fully tested.

These apps (LXCs) were NOT pre-built via community scripts (as I prefer the beta version) but still run fine on Debian 13:

• Whisparr

These apps (LXCs) have been pre-built via the community script (These are not fresh installs) and do not work when updating to Debian 13:

• Huntarr
• Change Detection

For future reference, Unpackerr from the project board also runs fine on Debian 13.

I hope this helps.
I can gather more info on Huntarr and Change Detection if required.

Thanks.

[Aloe-recite]

these works for me (some extensively tested more than others):

• Sonarr
• Prowlarr
• ADGuard Home
• Gitea
• Karakeep
• Caddy
• Audiobookshelf
• Homepage
• Kavita
• Cronicle
• Peanut
• Homebox

NOT working:

• Adventurelog
• Changedetection
• Booklore (seems to start, but shows a generic nginx welcome page?)
• Calibre web

[jonnewman85]

These do not work for me after Debian 13 upgrade inside the LXC:

• WallOS
• Bar-Assistant
• phpipam

phpipam and WallOS seem to be Apache2/PHP module issues causing Apache2 to not load. Bar-Assistant will not connect to the API after upgrade (checked IPs in config, all correct)

[CrazyWolf13]

@jonnewman85 check out the linked github issue, it contains a fix for wallos.

[dxxxm]

LCX upgrade to Debian 13 worked OK:

• apt-cacher-ng
• pihole
• esphome
• paperless-ngx
• grafana
• influxdb
• deCONZ

[SinnedNima]

LCX upgrade to Debian 13 worked OK:

* apt-cacher-ng

* pihole

* esphome

* paperless-ngx

* grafana

* influxdb

* deCONZ

couldn't get it to work with my paperless-ngx container. Prompted me to upgrade postgresql - i ran it with and without the upgrade, still not working.
Docker was painless so far. Will try the other containers one by one.

[vhsdream]

So I know we've established that the Homepage LXC is safe to update, but I've been running it for so long I forgot it was on Bullseye. I was able to upgrade to Bookworm, then reboot and upgrade to Trixie just fine.

[ksj9877us]

Heimdall-Dashboard no longer works when I try to load the webpage.

[CrazyWolf13]

@ksj9877us can you add some sort of logs or something like that?

[Seqway]

Technitium DNS works perfect with this script. Updated to Trixie without any problem
(except at the login still says Debian 12)

[MickLesk]

#7227

[kriss0707]

Zabbix seems to work (no postgresql upgrade).

I need to install the PostgreSQL database module for PHP package after all to recover database connection
apt install php-pgsql

After rebooting, the update command shows

⏳ Stopping ServicesFailed to stop zabbix-agent.service: Unit zabbix-agent.service not loaded.

[ERROR] in line 45: exit code 0: while executing command systemctl stop zabbix-server $AGENT_SERVICE

[CrazyWolf13]

@kriss0707 all php modules need to be reinstalled view here on how to do this: #7332

[summoningpixels]

these are working fine for me:

• adguard
• stirling-pdf
• tandoor
• debian
• readeck
• wireguard
• watcharr
• commafeed

I do get the "Policy will reject signature within a year" message for:
Tandoor: Warning: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details Notice: Missing Signed-By in the sources.list(5) entry for 'https://apt.postgresql.org/pub/repos/apt'
CommaFeed Warning: https://repos.azul.com/zulu/deb/dists/stable/InRelease: Policy will reject signature within a year, see --audit for details Notice: Missing Signed-By in the sources.list(5) entry for 'https://repos.azul.com/zulu/deb'
Watcharr: Warning: https://deb.nodesource.com/node_22.x/dists/nodistro/InRelease: Policy will reject signature within a year, see --audit for details

Later edit: Vaultwarden has been fine too

[summoningpixels]

@CrazyWolf13

Output:

root@commafeed:~# cat /etc/apt/sources.list.d/adoptium.sources
cat: /etc/apt/sources.list.d/adoptium.sources: No such file or directory
root@commafeed:~# cat /etc/apt/sources.list.d/adoptium.lis
cat: /etc/apt/sources.list.d/adoptium.lis: No such file or directory

Modernizing sources worked for /etc/apt/sources.list.d/adoptium.sources

I ran through the steps again, if that's what you meant, and now:

root@commafeed:~# apt update
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://security.debian.org trixie-security InRelease                                
Hit:3 http://deb.debian.org/debian trixie-updates InRelease                               
Get:4 https://packages.adoptium.net/artifactory/deb trixie InRelease [7,503 B]
Hit:5 https://repos.azul.com/zulu/deb stable InRelease     
Err:5 https://repos.azul.com/zulu/deb stable InRelease
  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 27BC0C8CB3D81623F59BDADCB1998361219BD9C9, which is needed to verify signature.
Fetched 7,503 B in 1s (11.2 kB/s)
All packages are up to date.    
Warning: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/adoptium.list:1 and /etc/apt/sources.list.d/adoptium.sources:1
Warning: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/adoptium.list:1 and /etc/apt/sources.list.d/adoptium.sources:1
Warning: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list.d/adoptium.list:1 and /etc/apt/sources.list.d/adoptium.sources:1
Warning: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/adoptium.list:1 and /etc/apt/sources.list.d/adoptium.sources:1
Warning: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. OpenPGP signature verification failed: https://repos.azul.com/zulu/deb stable InRelease: Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 27BC0C8CB3D81623F59BDADCB1998361219BD9C9, which is needed to verify signature.
Warning: Failed to fetch https://repos.azul.com/zulu/deb/dists/stable/InRelease  Sub-process /usr/bin/sqv returned an error code (1), error message is: Missing key 27BC0C8CB3D81623F59BDADCB1998361219BD9C9, which is needed to verify signature.
Warning: Some index files failed to download. They have been ignored, or old ones used instead.
Warning: Target Packages (main/binary-amd64/Packages) is configured multiple times in /etc/apt/sources.list.d/adoptium.list:1 and /etc/apt/sources.list.d/adoptium.sources:1
Warning: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list.d/adoptium.list:1 and /etc/apt/sources.list.d/adoptium.sources:1
Warning: Target Translations (main/i18n/Translation-en_US) is configured multiple times in /etc/apt/sources.list.d/adoptium.list:1 and /etc/apt/sources.list.d/adoptium.sources:1
Warning: Target Translations (main/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list.d/adoptium.list:1 and /etc/apt/sources.list.d/adoptium.sources:1
Notice: Missing Signed-By in the sources.list(5) entry for 'https://repos.azul.com/zulu/deb'

and here's adoptium.sources after modernizing sources:

root@commafeed:~# cat /etc/apt/sources.list.d/adoptium.sources
Types: deb
URIs: https://packages.adoptium.net/artifactory/deb/
Suites: trixie
Components: main
Signed-By: /etc/apt/trusted.gpg.d/adoptium.gpg
root@commafeed:~# cat cat /etc/apt/sources.list.d/adoptium.lis
cat: cat: No such file or directory
cat: /etc/apt/sources.list.d/adoptium.lis: No such file or directory

[CrazyWolf13]

@summoningpixels
You were missing a "t" at the end of list. Though you don't have to rerun those commands.

You should be fine to remove this:
/etc/apt/sources.list.d/adoptium.list

Can you send the outputs of the following:

ls /etc/apt/sources.list.d/

And also can you remove all the files related to azul zulu inside of /etc/apt/sources.list.d/ directory?

Then run apt update again and ensure with apt show temurin-17-jdk it's installed

[summoningpixels]

@CrazyWolf13 that did it, everything is clean now. apt status doesn't work, but I can confirm temurin-17-jdk is installed. Thanks for all the help with this!

[CrazyWolf13]

@summoningpixels awesome!

Can you share what files you had to remove from the azul zulu repo? So we can maybe do this via script?

[summoningpixels]

@CrazyWolf13 it was zulu-openjdk.list.bak and zulu-openjdk.sources

[stevang]

sabnzbd LXC Debian12 > 13 Upgrade

it failed to start the sabnzbd systemd service due to

Not all required Python modules are available, please check requirements.txt
Missing module: sabctools
You can read more at: https://sabnzbd.org/wiki/installation/install-off-modules
If you still experience problems, remove all .pyc files in this folder and subfolders

i had to remove the virtual environment

cd /opt/sabnzbd
rm -rf venv

EDIT - Correct solution over here: #7489 (reply in thread)

.
.
.
and recreate it, still being in the /opt/sabnzbd folder
python3 -m venv venv

activate Venv
source venv/bin/activate

install requirements

pip install --upgrade pip
pip install -r requirements.txt

and close the Venv
deactivate

after restarting the sabnzbd systemd service, sabnzbd should run again

systemctl stop sabnzbd.service
systemctl start sabnzbd.service
systemctl status sabnzbd.service

[MickLesk]

sabnzbd doesnt Work with python3 venv, so you Break the next Update

sabnzbd Runs with uv

[stevang]

how about that to rebuild venv? is that good for future updates?

rm -rf /opt/sabnzbd/venv
uv venv /opt/sabnzbd/venv
uv pip install -r /opt/sabnzbd/requirements.txt --python=/opt/sabnzbd/venv/bin/python

[MickLesk]

Yeah

uv venv /opt/sabnzbd/venv
uv pip install --upgrade pip --python=/opt/sabnzbd/venv/bin/python
uv pip install -r /opt/sabnzbd/requirements.txt --python=/opt/sabnzbd/venv/bin/python