v9.3.5

[dalathegreat]

What's Changed 📦

This release adds support for new batteries and inverters. It also adds a new recovery mode for deeply discharged batteries.

Taking this release into use ⚙️

Note that v9.X.X is a major new release of the Battery-Emulator software. Users are no longer required to compile software, just use the attached .bin file at the bottom of this page, and flash it to your board (Either via USB first time setup or Over-The-Air(OTA) update!)

Setting up a board for the first time? Use this webpage to flash the board!

Quickstart video: https://youtu.be/sR3t7j0R9Z0

Batteries 🔋

• New battery: Kia Ceed PHEV by @dalathegreat in New battery: Kia Ceed PHEV #1957
• Feature: Recovery charge for undercharged batteries by @dalathegreat in Feature: Recovery charge for undercharged batteries #1948
• MG HS PHEV: Add UDS based BMS reset. An external contactor is no longer required for reliable operation. By @jonny5532 in MG_HS_PHEV: Add UDS based BMS reset #1903
• Volkswagen MEB: Fix glitched negative reading of celltemps by @dalathegreat in Volkswagen MEB: Fix negative reading of celltemps #1952
• Kia Hybrid: Improvement; Add autodetect between HEV and PHEV by @dalathegreat in Kia Hybrid: Improvement; Add autodetect between HEV and PHEV #1950

Inverters ⚡

• New Inverter ⚡ : Add support for Growatt WIT 50/100kW inverters by @dalathegreat in New Inverter ⚡ : Add support for Growatt WIT #1965
• Add runtime battery model configuration for Sungrow SBRXXX inverter by @aferrara in Add runtime battery model configuration for Sungrow SBRXXX inverter #1951

Hardware 🤖

• Added support for BECom Hardware, by @rjsc in BECom Hardware - Initial implementation #1712
• Fixed SD Init bug when SD card is missing or is corrupted by @madymax in Fix SD Init bug when SD missing or is corrupted #1943

Housekeeping 🧹

• Bugfix: CANFD; Begin correct interface by @dalathegreat in Bugfix: CANFD; Begin correct interface #1964
• Update comment on datalayer by @Almendronman in Update local project with latest version from server. #1963

New Contributors

• @Almendronman made their first contribution in Update local project with latest version from server. #1963

Full Changelog: v9.3.4...v9.3.5

---

This discussion was created from the release v9.3.5.