update readme

Author: dalethomas81

Documentation/Build Instructions/Readme.md

@@ -6,6 +6,6 @@ As is turns out, the model I originally used has a different pinout than most ot
 
 However, there is a solution for the current versions of the board (currently v1.2). You can simply shift the board one pin over and solder a jumper from the vcc line to the pps through-hole (not used otherwise).  
 
-[Front](/Media/Build Instructions/gps-alternate.jpeg/)  
+<img src="Media/Build Instructions/gps-alternate.jpeg" alt="Alt text" style="width: 50%; display: block; margin: auto;" />  
 
 Additionally, I do plan to change this in the next board revision.  

README.md

@@ -131,6 +131,14 @@ Panasonic 18650 - don't have a link but you can get them on eBay or Amazon
 
 ## Updates ##
 
+### 31-MAY-2025: Major updates!
+
+I have made some major updates to the board (RF filtering for the PTT), to the enclosure, and to the firmware (many improvements to the display including a dedicated "New Message" display). Additionally, I have created a companion GUI app that you can use to connect HamMessenger to your PC.  
+
+I have ordered parts to begin building 3 new HamMessengers and will begin building them next week. The purpose is to create some instructional videos and documentation to help support anyone that wants to build one themselves. I also plan to donate these builds to my local Ham club.  
+
+There is now a new [Build Instructions](/Documentation/Build%20Instructions/) folder that I will use to put the tutorial references and documentation.  
+
 ### 08-SEP-2021: Troubleshooting freezing
 
 There is an issue where during transmit the unit will freeze or restart. I did some experimenting and found out that its the cable that connects to the radio. It is not shielded at all. I thought the small ferrites would be enough to combat this but obviously not. I did some experimenting and found that if I use larger ferrites and wrap them once that the issue goes away. [Here](/Media/Install/large-ferrites.jpeg/) is a picture of the installation. I will now look at sourcing a shielded cable for this application.
@@ -146,14 +154,6 @@ A few pics:
 [Side](/Media/Unibody-Frame-v1/side.jpeg/)  
 [Back](/Media/Unibody-Frame-v1/back.jpeg/)  
 
-### 31-MAY-2025: Major updates!
-
-I have made some major updates to the board (RF filtering for the PTT), to the enclosure, and to the firmware (many improvements to the display including a dedicated "New Message" display). Additionally, I have created a companion GUI app that you can use to connect HamMessenger to your PC.  
-
-I have ordered parts to begin building 3 new HamMessengers and will begin building them next week. The purpose is to create some instructional videos and documentation to help support anyone that wants to build one themselves. I also plan to donate these builds to my local Ham club.  
-
-There is now a new [Build Instructions](/Documentation/Build%20Instructions/) folder that I will use to put the tutorial references and documentation.  
-
 ### 14-AUG-2021: Rev v1.1 has arrived and it works!
 
 Ok, great news. Revision v1.1 of the HamMessenger board came in from PCBWay and they are great. I built 2 units and was able to encode and decode messages well. I will add some more information later but [here](/Media/Board-v1.1/) is a few pictures for now.