Sensors for individual values of SE-F batteries on single-phase inverter

[nazar-pc]

I have three SE-F16 batteries connected to SUN-8K-SG05LP1 inverter, but only aggregated sensor it created for it. I tried changing the number of batteries in the configuration to 3, but it didn't seem to make any difference.

According to #805 this seems to be on purpose, but maybe there is a difference between inverter/battery models?

Grok suggested to read 120 registers starting at 10040, so here they are in case it is helpful:

Details

"10040": 530
"10041": 68
"10042": 1235
"10043": 1240
"10044": 1230
"10045": 1250
"10046": 600
"10047": 790
"10048": 1000
"10049": 0
"10050": 3140
"10051": 0
"10052": 0
"10053": 0
"10054": 3319
"10055": 3316
"10056": 0
"10057": 49
"10058": 0
"10059": 0
"10060": 0
"10061": 0
"10062": 61442
"10063": 43606
"10064": 0
"10065": 0
"10066": 0
"10067": 0
"10068": 0
"10069": 0
"10070": 13362
"10071": 12343
"10072": 12338
"10073": 12336
"10074": 16964
"10075": 12593
"10076": 12336
"10077": 13877
"10078": 530
"10079": 65
"10080": 1235
"10081": 1240
"10082": 1230
"10083": 1270
"10084": 600
"10085": 782
"10086": 1000
"10087": 0
"10088": 3140
"10089": 0
"10090": 0
"10091": 0
"10092": 3317
"10093": 3315
"10094": 0
"10095": 49
"10096": 0
"10097": 0
"10098": 0
"10099": 0
"10100": 61442
"10101": 43606
"10102": 0
"10103": 0
"10104": 0
"10105": 0
"10106": 0
"10107": 0
"10108": 13362
"10109": 12343
"10110": 12339
"10111": 12336
"10112": 16964
"10113": 12337
"10114": 12848
"10115": 12345
"10116": 530
"10117": 66
"10118": 1250
"10119": 1260
"10120": 1240
"10121": 1270
"10122": 600
"10123": 773
"10124": 1000
"10125": 0
"10126": 3140
"10127": 0
"10128": 0
"10129": 0
"10130": 3318
"10131": 3316
"10132": 0
"10133": 49
"10134": 0
"10135": 0
"10136": 0
"10137": 0
"10138": 61442
"10139": 43606
"10140": 0
"10141": 0
"10142": 0
"10143": 0
"10144": 0
"10145": 0
"10146": 0
"10147": 0
"10148": 0
"10149": 0
"10150": 0
"10151": 0
"10152": 0
"10153": 0
"10154": 0
"10155": 0
"10156": 0
"10157": 0
"10158": 0
"10159": 0