Docker sftpgo vars to https web ui

[Dante3004]

Hi again,

I have tried several configurations to switch the client to https without success. Here is the podman command I use:

podman run
-d --restart=always --pod=sftpgo
-v /data/volumes/sftpgo-data:/srv/sftpgo:rw,Z
-v /data/volumes/sftpgo-config:/var/lib/sftpgo:rw,Z
-e "SFTPGO_HTTPD__BINDINGS__ENABLE_HTTPS=true"
-e "SFTPGO_HTTPD__BINDINGS__0__PORT=9443"
-e "SFTPGO_HTTPD__CERTIFICATE_FILE=/var/lib/sftpgo/cert.pem"
-e "SFTPGO_HTTPD__CERTIFICATE_KEY_FILE=/var/lib/sftpgo/key.pem"
--name sftpgo
drakkan/sftpgo:latest

the logs says :

{"level":"debug","time":"2022-01-28T10:33:00.255","sender":"httpd","message":"initializing HTTP server with config {Bindings:[{Address: Port:9443 EnableWebAdmin:true EnableWebClient:true EnableHTTPS:false ClientAuthType:0 TLSCipherSuites:[] ProxyAllowed:[] HideLoginURL:0 RenderOpenAPI:true WebClientIntegrations:[] allowHeadersFrom:[]} {Address: Port:0 EnableWebAdmin:true EnableWebClient:true EnableHTTPS:true ClientAuthType:0 TLSCipherSuites:[] ProxyAllowed:[] HideLoginURL:0 RenderOpenAPI:true WebClientIntegrations:[] allowHeadersFrom:[]} {Address: Port:0 EnableWebAdmin:true EnableWebClient:true EnableHTTPS:true ClientAuthType:0 TLSCipherSuites:[] ProxyAllowed:[] HideLoginURL:0 RenderOpenAPI:true WebClientIntegrations:[] allowHeadersFrom:[]}] TemplatesPath:/usr/share/sftpgo/templates StaticFilesPath:/usr/share/sftpgo/static BackupsPath:/srv/sftpgo/backups OpenAPIPath:/usr/share/sftpgo/openapi WebRoot: CertificateFile:/var/lib/sftpgo/cert.pem CertificateKeyFile:/var/lib/sftpgo/key.pem CACertificates:[] CARevocationLists:[] SigningPassphrase:[redacted] MaxUploadFileSize:1048576000 Cors:{AllowedOrigins:[] AllowedMethods:[] AllowedHeaders:[] ExposedHeaders:[] AllowCredentials:false Enabled:false MaxAge:0}}"}
{"level":"debug","time":"2022-01-28T10:33:00.269","sender":"httpd","message":"TLS certificate \"/var/lib/sftpgo/cert.pem\" successfully loaded"}
{"level":"info","time":"2022-01-28T10:33:00.269","sender":"sftpd","message":"server listener registered, address: [::]:2022"}
{"level":"info","time":"2022-01-28T10:33:00.269","sender":"httpd","message":"server listener registered, address: [::]:9443 TLS enabled: false"}

Thanks in advance for your answers :)

[drakkan]

Hi,

please try SFTPGO_HTTPD__BINDINGS__0__ENABLE_HTTPS=true

[Dante3004]

Fine it work now, thanks for your help. Do you have a list with all env vars possible ?

[drakkan]

Fine it work now, thanks for your help. Do you have a list with all env vars possible ?

Not explictly, each configuration parameter can be set using an env var. The env vars are documented here and in the same doc are documented all the configuration parameters. You can also read all the (non deprecated) configuration parameters directly from the default config file. It should be quite easy to convert the configuration parameter name to the env var name

[fsdrw08]

is it possible to pass the config by config file instead of env var in docker?

[fsdrw08]

ok, I got it, just mount the json config file to /etc/sftpgo/sftpgo.json