Bilibili观光团

[0x3A2B]

这个项目很棒哦

[eeyrw]

终于有人观光了

[0x3A2B]

能不能麻烦说一下我自己想写下位机的话如何接受数据？数据包的结构是怎样的？

[eeyrw]

这。。。不如先RTFSC吧。
全在这个文件里了：
https://github.com/eeyrw/LcdTcp/blob/master/CmdProc.cpp

[Emanesh]

Very nice project. I have followed the instructions but the display doesn't show anything after "standby Ip address" , however, serial monitor shows updates in cursor positions.
I tested on 20x4 lcd i2c display,
Have i missed anything?

[eeyrw]

That sounds weired. "standby Ip address" indicates that the device has been successfully connected to Wi-Fi and display is working. It should work if you configure LCD-Smartie with versus DLL driver (https://github.com/eeyrw/LcdTcpDll) correctly.

[limbo666]

That sounds weired. "standby Ip address" indicates that the device has been successfully connected to Wi-Fi and display is working. It should work if you configure LCD-Smartie with versus DLL driver (https://github.com/eeyrw/LcdTcpDll) correctly.

I have the same problem .
It seems that data are arriving correctly to the firmware but the display stays on last startup messages which is IP address.
I have checked by adding a Serial.print( char(Buf[2+i]) ); on
CMD_LCD_WRITEDATA and I can confirm that connection between LCD Smartie and hardware is correct. the serial monitor displays exactly the data LCD Smaries sends, however the LCD doesn't change.
Any ideas?