Error: ENOENT: no such file or directory, opendir '/home/runner/work/bon/bon/target/tests/target'

ENOENT: no such file or directory, opendir '/home/runner/work/bon/bon/target/tests/target'

module is not supported in `trait`s or `impl`s

implementation is not supported in `trait`s or `impl`s

struct is not supported in `trait`s or `impl`s

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

this function contains a `self` parameter which likely means the builder attribute was used inside of an impl block; the impl block needs to be annotated with the #[bon] attribute and the builder attribute must be spelled as #[builder] without any additional path prefix, since it's used as a simple inert config attribute for #[bon] in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `foo::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

there are no #[builder] functions in the impl block, so there is no need for a #[bon] attribute here

#[builder] attributes on the receiver are not supported

Unknown field: `attrs`

Error: ENOENT: no such file or directory, opendir '/home/runner/work/bon/bon/target/tests/target'

ENOENT: no such file or directory, opendir '/home/runner/work/bon/bon/target/tests/target'

Error: ENOENT: no such file or directory, opendir '/home/runner/work/bon/bon/target/tests/target'

ENOENT: no such file or directory, opendir '/home/runner/work/bon/bon/target/tests/target'

module is not supported in `trait`s or `impl`s

implementation is not supported in `trait`s or `impl`s

struct is not supported in `trait`s or `impl`s

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

this function contains a `self` parameter which likely means the builder attribute was used inside of an impl block; the impl block needs to be annotated with the #[bon] attribute and the builder attribute must be spelled as #[builder] without any additional path prefix, since it's used as a simple inert config attribute for #[bon] in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `foo::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

there are no #[builder] functions in the impl block, so there is no need for a #[bon] attribute here

#[builder] attributes on the receiver are not supported

Unknown field: `attrs`

Error: ENOENT: no such file or directory, opendir '/home/runner/work/bon/bon/target/tests/target'

ENOENT: no such file or directory, opendir '/home/runner/work/bon/bon/target/tests/target'

Error: ENOENT: no such file or directory, opendir '/Users/runner/work/bon/bon/target/tests/target'

ENOENT: no such file or directory, opendir '/Users/runner/work/bon/bon/target/tests/target'

module is not supported in `trait`s or `impl`s

implementation is not supported in `trait`s or `impl`s

struct is not supported in `trait`s or `impl`s

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

this function contains a `self` parameter which likely means the builder attribute was used inside of an impl block; the impl block needs to be annotated with the #[bon] attribute and the builder attribute must be spelled as #[builder] without any additional path prefix, since it's used as a simple inert config attribute for #[bon] in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `foo::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

there are no #[builder] functions in the impl block, so there is no need for a #[bon] attribute here

#[builder] attributes on the receiver are not supported

Unknown field: `attrs`

Error: ENOENT: no such file or directory, opendir '/Users/runner/work/bon/bon/target/tests/target'

ENOENT: no such file or directory, opendir '/Users/runner/work/bon/bon/target/tests/target'

module is not supported in `trait`s or `impl`s

implementation is not supported in `trait`s or `impl`s

struct is not supported in `trait`s or `impl`s

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

this function contains a `self` parameter which likely means the builder attribute was used inside of an impl block; the impl block needs to be annotated with the #[bon] attribute and the builder attribute must be spelled as #[builder] without any additional path prefix, since it's used as a simple inert config attribute for #[bon] in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `foo::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

there are no #[builder] functions in the impl block, so there is no need for a #[bon] attribute here

#[builder] attributes on the receiver are not supported

Unknown field: `attrs`

Error: ENOENT: no such file or directory, opendir 'D:\a\bon\bon\target\tests\target'

ENOENT: no such file or directory, opendir 'D:\a\bon\bon\target\tests\target'

module is not supported in `trait`s or `impl`s

implementation is not supported in `trait`s or `impl`s

struct is not supported in `trait`s or `impl`s

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

this function contains a `self` parameter which likely means the builder attribute was used inside of an impl block; the impl block needs to be annotated with the #[bon] attribute and the builder attribute must be spelled as #[builder] without any additional path prefix, since it's used as a simple inert config attribute for #[bon] in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `foo::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

there are no #[builder] functions in the impl block, so there is no need for a #[bon] attribute here

#[builder] attributes on the receiver are not supported

Unknown field: `attrs`

Error: ENOENT: no such file or directory, opendir 'D:\a\bon\bon\target\tests\target'

ENOENT: no such file or directory, opendir 'D:\a\bon\bon\target\tests\target'

Error: ENOENT: no such file or directory, opendir 'D:\a\bon\bon\target\tests\target'

ENOENT: no such file or directory, opendir 'D:\a\bon\bon\target\tests\target'

module is not supported in `trait`s or `impl`s

implementation is not supported in `trait`s or `impl`s

struct is not supported in `trait`s or `impl`s

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

this function contains a `self` parameter which likely means the builder attribute was used inside of an impl block; the impl block needs to be annotated with the #[bon] attribute and the builder attribute must be spelled as #[builder] without any additional path prefix, since it's used as a simple inert config attribute for #[bon] in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `bon::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

#[bon] macro found no #[builder] attributes in the impl block, but it looks like this attribute was meant for #[bon]; note that #[bon] expects a bare #[builder] attribute without the `foo::` prefix; #[builder] acts as a simple config attribute for the active #[bon] attribute in impl blocks; more info on inert vs active attributes: https://doc.rust-lang.org/reference/attributes.html#active-and-inert-attributes

there are no #[builder] functions in the impl block, so there is no need for a #[bon] attribute here

#[builder] attributes on the receiver are not supported

Unknown field: `attrs`

Error: ENOENT: no such file or directory, opendir 'D:\a\bon\bon\target\tests\target'

ENOENT: no such file or directory, opendir 'D:\a\bon\bon\target\tests\target'

The run was canceled by @Veetaha.

The operation was canceled.

The run was canceled by @Veetaha.

The operation was canceled.

The run was canceled by @Veetaha.

The operation was canceled.

The run was canceled by @Veetaha.

The operation was canceled.

The run was canceled by @Veetaha.

The operation was canceled.

The run was canceled by @Veetaha.

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/

Failed to save: "/opt/homebrew/bin/gtar" failed with error: The process '/opt/homebrew/bin/gtar' failed with exit code 1

Node.js 20 actions are deprecated. The following actions are running on Node.js 20 and may not work as expected: Swatinem/rust-cache@779680da715d629ac1d338a641029a2f4372abb5. Actions will be forced to run with Node.js 24 by default starting June 2nd, 2026. Please check if updated versions of these actions are available that support Node.js 24. To opt into Node.js 24 now, set the FORCE_JAVASCRIPT_ACTIONS_TO_NODE24=true environment variable on the runner or in your workflow file. Once Node.js 24 becomes the default, you can temporarily opt out by setting ACTIONS_ALLOW_USE_UNSECURE_NODE_VERSION=true. For more information see: https://github.blog/changelog/2025-09-19-deprecation-of-node-20-on-github-actions-runners/