ATS-Mini switches on/off repeatedly with no antenna installed on v2.33

[825i]

Describe the bug
When no antenna connected on v2.33 my ATS mini now switches itself on and off over and over for about 30 seconds until finally turning on. Obviously the device is near useless without an antenna but this is problematic. I am guessing this is due to the recent update that adds a 100ms 'wait' for the SI7342 chip. Though I could be wrong.

To Reproduce
Unscrew antenna and turn on device whilst running v2.33.

Expected behavior
The device should just turn on as normal.

Information:

• Firmware version v2.33

Additional context

1. The battery is 100% fully charged despite what the indicator shows when turning on.

2. Turning on with an antenna it starts immediately without this behaviour and shows correct battery.

3. This never happened before updating. It always happens every time with a disconnected antenna.

[825i]

Video of problem:

VID-20251219-WA0000.mp4

[Yuradol1972]

After watching your video, we can say the following, it looks like something is consuming more battery power than usual during power-on. It looks like the WI-FI connection mode is turned on, so the screen is blinking, you may have problems with the battery, try to charge or replace it.

[max-arnold]

I would try resetting the settings (press the encoder while powering on the encoder). This is mandatory if you upgrade from <2.30