ESP32 with ESP-HOSTED-NG not connecting to WPA2 Enterprise network #679
Description
Checklist
- Checked the issue tracker for similar issues to ensure this is not a duplicate
- Read the documentation to confirm the issue is not addressed there and your configuration is set correctly
- Tested with the latest version to ensure the issue hasn't been fixed
How often does this bug occurs?
always
Expected behavior
I expect wpa_supplicant to be able to establish a connection to the WPA2 Enterprise network.
Actual behavior (suspected bug)
wpa_supplicant fails to connect to the WPA2 Enterprise and WPA3 Enterprise networks, but succeeds in connecting to the Open, WPA, WPA2, WPA3, WPA Enterprise network.
Error logs or terminal output
Log Linux:
wpa_supplicant v2.11
random: Trying to read entropy from /dev/random
Successfully initialized wpa_supplicant
Initializing interface 'wlan0' conf '/tmp/wpa_supplicant.conf' driver 'nl80211' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/tmp/wpa_supplicant.conf' -> '/tmp/wpa_supplicant.conf'
Reading configuration file '/tmp/wpa_supplicant.conf'
Line: 1 - start of a new network block
ssid - hexdump_ascii(len=13):
74 65 73 74 38 30 32 31 78 test8021x
scan_ssid=1 (0x1)
key_mgmt: 0x1
proto: 0x2
eap methods - hexdump(len=16): 00 00 00 00 19 00 00 00 00 00 00 00 00 00 00 00
identity - hexdump_ascii(len=5):
75 73 65 72 33 user3
password - hexdump_ascii(len=8): [REMOVED]
phase1 - hexdump_ascii(len=11):
70 65 61 70 6c 61 62 65 6c 3d 30 peaplabel=0
phase2 - hexdump_ascii(len=13):
61 75 74 68 3d 4d 53 43 48 41 50 56 32 auth=MSCHAPV2
Priority group 0
id=0 ssid='test8021x'
nl80211: Kernel version: Linux 6.12.21+ (#1 SMP PREEMPT Tue Oct 21 16:23:36 UTC 2025; armv7l)
nl80211: Maximum supported attribute ID: 332
nl80211: Supported cipher 00-0f-ac:1
nl80211: Supported cipher 00-0f-ac:5
nl80211: Supported cipher 00-0f-ac:2
nl80211: Supported cipher 00-0f-ac:4
nl80211: Supported cipher 00-14-72:1
nl80211: Supported cipher 00-0f-ac:6
nl80211: Supports Probe Response offload in AP mode
nl80211: key_mgmt=0x1fd0f enc=0x10f auth=0x7 flags=0x32350a0 flags2=0x100 rrm_flags=0x0 probe_resp_offloads=0x0 max_stations=0 max_remain_on_chan=5000 max_scan_ssids=30
nl80211: interface wlan0 in phy phy0
nl80211: Set mode ifindex 6 iftype 2 (STATION)
nl80211: Subscribe to mgmt frames with non-AP handle 0x2316ae0
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0104 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 01 04
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=040a multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 04 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=040b multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 04 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=040c multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 04 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=040d multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 04 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=090a multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 09 0a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=090b multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 09 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=090c multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 09 0c
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=090d multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 09 0d
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0409506f9a09 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=7f506f9a09 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=5): 7f 50 6f 9a 09
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0409506f9a1a multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=6): 04 09 50 6f 9a 1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0801 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 08 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=06 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=1): 06
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0a07 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 0a 07
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0a11 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 0a 11
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0a0b multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 0a 0b
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0a1a multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 0a 1a
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=1101 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 11 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=1102 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 11 02
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0505 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 05 05
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=0500 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 05 00
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=1301 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 13 01
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=1305 multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=2): 13 05
nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x2316ae0 match=7e506f9a1a multicast=0
nl80211: kernel reports: Registration to specific type not supported
nl80211: Register frame command failed (type=208): ret=-22 (Invalid argument)
nl80211: Register frame match - hexdump(len=5): 7e 50 6f 9a 1a
nl80211: Failed to register Action frame processing - ignore for now
rfkill: initial event: idx=0 type=1 op=0 soft=0 hard=0
netlink: Operstate: ifindex=6 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
Add interface wlan0 to a new radio phy0
nl80211: Regulatory information - country=00
nl80211: 2402-2472 @ 40 MHz 20 mBm
nl80211: 2457-2482 @ 20 MHz 20 mBm (no IR)
nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
nl80211: 5170-5250 @ 80 MHz 20 mBm (no IR)
nl80211: 5250-5330 @ 80 MHz 20 mBm (DFS) (no IR)
nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
nl80211: 5735-5835 @ 80 MHz 20 mBm (no IR)
nl80211: 57240-63720 @ 2160 MHz 0 mBm
nl80211: Added 802.11b mode based on 802.11g information
nl80211: Mode IEEE 802.11g: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR] 2484[NO_IR]
nl80211: Mode IEEE 802.11b: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467[NO_IR] 2472[NO_IR] 2484[NO_IR]
wlan0: Own MAC address: 98:cd:ac:4c:43:8c
wpa_driver_nl80211_set_key: ifindex=6 (wlan0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
broadcast key
wpa_driver_nl80211_set_key: ifindex=6 (wlan0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
broadcast key
wpa_driver_nl80211_set_key: ifindex=6 (wlan0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
broadcast key
wpa_driver_nl80211_set_key: ifindex=6 (wlan0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
broadcast key
wpa_driver_nl80211_set_key: ifindex=6 (wlan0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
broadcast key
wpa_driver_nl80211_set_key: ifindex=6 (wlan0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0 key_flag=0x10 link_id=-1
nl80211: DEL_KEY
broadcast key
wlan0: RSN: flushing PMKID list in the driver
nl80211: Flush PMKIDs
wlan0: Setting scan request: 0.100000 sec
TDLS: TDLS operation not supported by driver
TDLS: Driver uses internal link setup
TDLS: Driver does not support TDLS channel switching
wlan0: WPS: UUID based on MAC address: 91c0b957-9c5f-56ad-92ef-26345eae3def
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: Supplicant port status: Unauthorized
nl80211: Skip set_supp_port(unauthorized) while not associated
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
wlan0: Added interface wlan0
wlan0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=6 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
random: Got 20/20 bytes from /dev/random
RTM_NEWLINK: ifi_index=6 ifname=wlan0 operstate=5 linkmode=0 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
RTM_NEWLINK: ifi_index=6 ifname=wlan0 operstate=5 linkmode=1 ifi_family=0 ifi_flags=0x11003 ([UP][LOWER_UP])
wlan0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=13):
74 65 73 74 38 30 32 31 78 test8021x
wlan0: Starting AP scan for wildcard SSID
wlan0: Add radio work 'scan'@0x2378f60
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'scan'@0x2378f60 after 0.000051 second wait
wlan0: nl80211: scan request
nl80211: Scan SSID test8021x
nl80211: Scan SSID
nl80211: Scan co-located APs on 6 GHz
nl80211: Scan extra IEs - hexdump(len=15): 7f 0b 00 00 0a 02 00 00 40 00 00 00 20 72 00
Scan requested (ret=0) - scan timeout 10 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (47) received
wlan0: Own scan request started a scan in 0.000204 seconds
EAPOL: disable timer tick
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan probed for SSID 'test8021x'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlan0: Event SCAN_RESULTS (3) received
wlan0: Scan completed in 1.693104 seconds
nl80211: Received scan results (1 BSSes)
wlan0: BSS: Start scan result update 1
wlan0: BSS: Add new id 0 BSSID 0a:ec:da:fd:81:02 SSID 'test8021x' freq 2462
BSS: last_scan_res_used=1/32
wlan0: New scan results available (own=1 ext=0)
wlan0: Radio work 'scan'@0x2378f60 done in 1.771683 seconds
wlan0: radio_work_free('scan'@0x2378f60): num_active_works --> 0
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-53 freq=2462
wlan0: selected based on RSN IE
IEEE 802.11 element parse ignored unknown element (id=7 elen=6)
IEEE 802.11 element parse ignored unknown element (id=11 elen=5)
wlan0: MLD: No Multi-Link element
wlan0: selected BSS 0a:ec:da:fd:81:02 ssid='test8021x'
wlan0: Considering connect request: reassociate: 0 selected: 0a:ec:da:fd:81:02 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x23124c0 current_ssid=(nil)
wlan0: Request association with 0a:ec:da:fd:81:02
TDLS: TDLS is allowed in the target BSS
TDLS: TDLS channel switch allowed in the target BSS
wlan0: No ongoing scan/p2p-scan found to abort
wlan0: Add radio work 'sme-connect'@0x237dd00
wlan0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlan0: Starting radio work 'sme-connect'@0x237dd00 after 0.000093 second wait
wlan0: WPA: clearing own WPA/RSN IE
wlan0: RSN: clearing own RSNXE
wlan0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
RSN: Search for BSSID 0a:ec:da:fd:81:02
RSN: No PMKSA cache entry found
wlan0: RSN: using IEEE 802.11i/D9.0
wlan0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 1 proto 2
wlan0: WPA: Selected mgmt group cipher 32
wlan0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
wlan0: WPA: clearing AP RSNXE
wlan0: WPA: AP group 0x10 network profile group 0x18; available group 0x10
wlan0: WPA: using GTK CCMP
wlan0: WPA: AP pairwise 0x10 network profile pairwise 0x18; available pairwise 0x10
wlan0: WPA: using PTK CCMP
wlan0: WPA: AP key_mgmt 0x1 network profile key_mgmt 0x1; available key_mgmt 0x1
wlan0: WPA: using KEY_MGMT 802.1X
wlan0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
wlan0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 0c 00
RSN: Set own RSNXE default - hexdump(len=0):
WPA: No current PMKSA - clear PMK
RRM: Determining whether RRM can be used - device support: 0x0
RRM: Insufficient RRM support in driver - do not use RRM
Added supported operating classes IE - hexdump(len=7): 3b 05 51 51 52 53 54
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlan0: Cancelling scan request
wlan0: SME: Trying to authenticate with 0a:ec:da:fd:81:02 (SSID='test8021x' freq=2462 MHz)
EAPOL: External notification - portValid=0
wlan0: State: SCANNING -> AUTHENTICATING
wlan0: Determining shared radio frequencies (max len 1)
wlan0: Shared frequencies (len=0): completed iteration
nl80211: Authenticate (ifindex=6)
* bssid=0a:ec:da:fd:81:02
* freq=2462
* SSID=test8021x
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
nl80211: Event message available
nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlan0
nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlan0(98:cd:ac:4c:43:8c) A1=98:cd:ac:4c:43:8c A2=00:00:00:00:00:00 on link_id=-1
nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 98 cd ac 4c 43 8c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d2 00
nl80211: Deauthenticate event
wlan0: Event DEAUTH (11) received
wlan0: Deauthentication notification
wlan0: * reason 210 (UNKNOWN)
wlan0: * address 00:00:00:00:00:00
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
wlan0: CTRL-EVENT-DISCONNECTED bssid=0a:ec:da:fd:81:02 reason=210
wlan0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=4)
wlan0: Do not request new immediate scan
wlan0: Radio work 'sme-connect'@0x237dd00 done in 1.943878 seconds
wlan0: radio_work_free('sme-connect'@0x237dd00): num_active_works --> 0
wlan0: Added BSSID 0a:ec:da:fd:81:02 into ignore list, ignoring for 10 seconds
wlan0: Consecutive connection failures: 1 --> request scan in 100 ms
wlan0: Setting scan request: 0.100000 sec
TDLS: Remove peers on disassociation
wlan0: WPA: Clear old PMK and PTK
wlan0: Disconnect event - remove keys
nl80211: Data frame filter flags=0x0
wlan0: State: AUTHENTICATING -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=6 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wlan0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=13):
74 65 73 74 38 30 32 31 78 test8021x
wlan0: Starting AP scan for wildcard SSID
wlan0: Add radio work 'scan'@0x2382098
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'scan'@0x2382098 after 0.000053 second wait
wlan0: nl80211: scan request
nl80211: Scan SSID test8021x
nl80211: Scan SSID
nl80211: Scan co-located APs on 6 GHz
nl80211: Scan extra IEs - hexdump(len=15): 7f 0b 00 00 0a 02 00 00 40 00 00 00 20 72 00
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (47) received
wlan0: Own scan request started a scan in 0.000187 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan probed for SSID 'test8021x'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlan0: Event SCAN_RESULTS (3) received
wlan0: Scan completed in 1.693048 seconds
nl80211: Received scan results (1 BSSes)
wlan0: BSS: Start scan result update 2
BSS: last_scan_res_used=1/32
wlan0: New scan results available (own=1 ext=0)
wlan0: Radio work 'scan'@0x2382098 done in 1.744782 seconds
wlan0: radio_work_free('scan'@0x2382098): num_active_works --> 0
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-49 freq=2462
wlan0: skip - BSSID ignored (count=1 limit=0)
wlan0: No APs found - clear BSSID ignore list and try again
wlan0: Removed BSSID 0a:ec:da:fd:81:02 from ignore list (clear)
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-49 freq=2462
wlan0: selected based on RSN IE
IEEE 802.11 element parse ignored unknown element (id=7 elen=6)
IEEE 802.11 element parse ignored unknown element (id=11 elen=5)
wlan0: MLD: No Multi-Link element
wlan0: selected BSS 0a:ec:da:fd:81:02 ssid='test8021x'
wlan0: Considering connect request: reassociate: 0 selected: 0a:ec:da:fd:81:02 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x23124c0 current_ssid=(nil)
wlan0: Request association with 0a:ec:da:fd:81:02
wlan0: Re-association to the same ESS
TDLS: TDLS is allowed in the target BSS
TDLS: TDLS channel switch allowed in the target BSS
wlan0: No ongoing scan/p2p-scan found to abort
wlan0: Add radio work 'sme-connect'@0x2379a40
wlan0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlan0: Starting radio work 'sme-connect'@0x2379a40 after 0.000090 second wait
wlan0: WPA: clearing own WPA/RSN IE
wlan0: RSN: clearing own RSNXE
wlan0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
RSN: Search for BSSID 0a:ec:da:fd:81:02
RSN: No PMKSA cache entry found
wlan0: RSN: using IEEE 802.11i/D9.0
wlan0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 1 proto 2
wlan0: WPA: Selected mgmt group cipher 32
wlan0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
wlan0: WPA: clearing AP RSNXE
wlan0: WPA: AP group 0x10 network profile group 0x18; available group 0x10
wlan0: WPA: using GTK CCMP
wlan0: WPA: AP pairwise 0x10 network profile pairwise 0x18; available pairwise 0x10
wlan0: WPA: using PTK CCMP
wlan0: WPA: AP key_mgmt 0x1 network profile key_mgmt 0x1; available key_mgmt 0x1
wlan0: WPA: using KEY_MGMT 802.1X
wlan0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
wlan0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 0c 00
RSN: Set own RSNXE default - hexdump(len=0):
WPA: No current PMKSA - clear PMK
RRM: Determining whether RRM can be used - device support: 0x0
RRM: Insufficient RRM support in driver - do not use RRM
Added supported operating classes IE - hexdump(len=7): 3b 05 51 51 52 53 54
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlan0: Cancelling scan request
wlan0: SME: Trying to authenticate with 0a:ec:da:fd:81:02 (SSID='test8021x' freq=2462 MHz)
EAPOL: External notification - portValid=0
wlan0: State: SCANNING -> AUTHENTICATING
wlan0: Determining shared radio frequencies (max len 1)
wlan0: Shared frequencies (len=0): completed iteration
nl80211: Authenticate (ifindex=6)
* bssid=0a:ec:da:fd:81:02
* freq=2462
* SSID=test8021x
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
nl80211: Event message available
nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlan0
nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlan0(98:cd:ac:4c:43:8c) A1=98:cd:ac:4c:43:8c A2=00:00:00:00:00:00 on link_id=-1
nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 98 cd ac 4c 43 8c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d2 00
nl80211: Deauthenticate event
wlan0: Event DEAUTH (11) received
wlan0: Deauthentication notification
wlan0: * reason 210 (UNKNOWN)
wlan0: * address 00:00:00:00:00:00
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
wlan0: CTRL-EVENT-DISCONNECTED bssid=0a:ec:da:fd:81:02 reason=210
wlan0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=4)
wlan0: Do not request new immediate scan
wlan0: Radio work 'sme-connect'@0x2379a40 done in 2.274036 seconds
wlan0: radio_work_free('sme-connect'@0x2379a40): num_active_works --> 0
wlan0: Added BSSID 0a:ec:da:fd:81:02 into ignore list, ignoring for 10 seconds
wlan0: Consecutive connection failures: 2 --> request scan in 500 ms
wlan0: Setting scan request: 0.500000 sec
TDLS: Remove peers on disassociation
wlan0: WPA: Clear old PMK and PTK
wlan0: Disconnect event - remove keys
nl80211: Data frame filter flags=0x0
wlan0: State: AUTHENTICATING -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=6 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wlan0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=13):
74 65 73 74 38 30 32 31 78 test8021x
wlan0: Starting AP scan for wildcard SSID
wlan0: Add radio work 'scan'@0x2379be8
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'scan'@0x2379be8 after 0.000053 second wait
wlan0: nl80211: scan request
nl80211: Scan SSID test8021x
nl80211: Scan SSID
nl80211: Scan co-located APs on 6 GHz
nl80211: Scan extra IEs - hexdump(len=15): 7f 0b 00 00 0a 02 00 00 40 00 00 00 20 72 00
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (47) received
wlan0: Own scan request started a scan in 0.000187 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan probed for SSID 'test8021x'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlan0: Event SCAN_RESULTS (3) received
wlan0: Scan completed in 1.693080 seconds
nl80211: Received scan results (1 BSSes)
wlan0: BSS: Start scan result update 3
BSS: last_scan_res_used=1/32
wlan0: New scan results available (own=1 ext=0)
wlan0: Radio work 'scan'@0x2379be8 done in 1.744390 seconds
wlan0: radio_work_free('scan'@0x2379be8): num_active_works --> 0
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-48 freq=2462
wlan0: skip - BSSID ignored (count=1 limit=0)
wlan0: No APs found - clear BSSID ignore list and try again
wlan0: Removed BSSID 0a:ec:da:fd:81:02 from ignore list (clear)
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-48 freq=2462
wlan0: selected based on RSN IE
IEEE 802.11 element parse ignored unknown element (id=7 elen=6)
IEEE 802.11 element parse ignored unknown element (id=11 elen=5)
wlan0: MLD: No Multi-Link element
wlan0: selected BSS 0a:ec:da:fd:81:02 ssid='test8021x'
wlan0: Considering connect request: reassociate: 0 selected: 0a:ec:da:fd:81:02 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x23124c0 current_ssid=(nil)
wlan0: Request association with 0a:ec:da:fd:81:02
wlan0: Re-association to the same ESS
TDLS: TDLS is allowed in the target BSS
TDLS: TDLS channel switch allowed in the target BSS
wlan0: No ongoing scan/p2p-scan found to abort
wlan0: Add radio work 'sme-connect'@0x237a4d8
wlan0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlan0: Starting radio work 'sme-connect'@0x237a4d8 after 0.000092 second wait
wlan0: WPA: clearing own WPA/RSN IE
wlan0: RSN: clearing own RSNXE
wlan0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
RSN: Search for BSSID 0a:ec:da:fd:81:02
RSN: No PMKSA cache entry found
wlan0: RSN: using IEEE 802.11i/D9.0
wlan0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 1 proto 2
wlan0: WPA: Selected mgmt group cipher 32
wlan0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
wlan0: WPA: clearing AP RSNXE
wlan0: WPA: AP group 0x10 network profile group 0x18; available group 0x10
wlan0: WPA: using GTK CCMP
wlan0: WPA: AP pairwise 0x10 network profile pairwise 0x18; available pairwise 0x10
wlan0: WPA: using PTK CCMP
wlan0: WPA: AP key_mgmt 0x1 network profile key_mgmt 0x1; available key_mgmt 0x1
wlan0: WPA: using KEY_MGMT 802.1X
wlan0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
wlan0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 0c 00
RSN: Set own RSNXE default - hexdump(len=0):
WPA: No current PMKSA - clear PMK
RRM: Determining whether RRM can be used - device support: 0x0
RRM: Insufficient RRM support in driver - do not use RRM
Added supported operating classes IE - hexdump(len=7): 3b 05 51 51 52 53 54
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlan0: Cancelling scan request
wlan0: SME: Trying to authenticate with 0a:ec:da:fd:81:02 (SSID='test8021x' freq=2462 MHz)
EAPOL: External notification - portValid=0
wlan0: State: SCANNING -> AUTHENTICATING
wlan0: Determining shared radio frequencies (max len 1)
wlan0: Shared frequencies (len=0): completed iteration
nl80211: Authenticate (ifindex=6)
* bssid=0a:ec:da:fd:81:02
* freq=2462
* SSID=test8021x
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
nl80211: Event message available
nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlan0
nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlan0(98:cd:ac:4c:43:8c) A1=98:cd:ac:4c:43:8c A2=00:00:00:00:00:00 on link_id=-1
nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 98 cd ac 4c 43 8c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d2 00
nl80211: Deauthenticate event
wlan0: Event DEAUTH (11) received
wlan0: Deauthentication notification
wlan0: * reason 210 (UNKNOWN)
wlan0: * address 00:00:00:00:00:00
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
wlan0: CTRL-EVENT-DISCONNECTED bssid=0a:ec:da:fd:81:02 reason=210
wlan0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=4)
wlan0: Do not request new immediate scan
wlan0: Radio work 'sme-connect'@0x237a4d8 done in 2.283937 seconds
wlan0: radio_work_free('sme-connect'@0x237a4d8): num_active_works --> 0
wlan0: Added BSSID 0a:ec:da:fd:81:02 into ignore list, ignoring for 10 seconds
wlan0: Consecutive connection failures: 3 --> request scan in 1000 ms
wlan0: Setting scan request: 1.000000 sec
TDLS: Remove peers on disassociation
wlan0: WPA: Clear old PMK and PTK
wlan0: Disconnect event - remove keys
nl80211: Data frame filter flags=0x0
wlan0: State: AUTHENTICATING -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=6 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wlan0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=13):
74 65 73 74 38 30 32 31 78 test8021x
wlan0: Starting AP scan for wildcard SSID
wlan0: Add radio work 'scan'@0x237a668
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'scan'@0x237a668 after 0.000053 second wait
wlan0: nl80211: scan request
nl80211: Scan SSID test8021x
nl80211: Scan SSID
nl80211: Scan co-located APs on 6 GHz
nl80211: Scan extra IEs - hexdump(len=15): 7f 0b 00 00 0a 02 00 00 40 00 00 00 20 72 00
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (47) received
wlan0: Own scan request started a scan in 0.000180 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan probed for SSID 'test8021x'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlan0: Event SCAN_RESULTS (3) received
wlan0: Scan completed in 1.693163 seconds
nl80211: Received scan results (1 BSSes)
wlan0: BSS: Start scan result update 4
BSS: last_scan_res_used=1/32
wlan0: New scan results available (own=1 ext=0)
wlan0: Radio work 'scan'@0x237a668 done in 1.743914 seconds
wlan0: radio_work_free('scan'@0x237a668): num_active_works --> 0
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-50 freq=2462
wlan0: skip - BSSID ignored (count=1 limit=0)
wlan0: No APs found - clear BSSID ignore list and try again
wlan0: Removed BSSID 0a:ec:da:fd:81:02 from ignore list (clear)
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-50 freq=2462
wlan0: selected based on RSN IE
IEEE 802.11 element parse ignored unknown element (id=7 elen=6)
IEEE 802.11 element parse ignored unknown element (id=11 elen=5)
wlan0: MLD: No Multi-Link element
wlan0: selected BSS 0a:ec:da:fd:81:02 ssid='test8021x'
wlan0: Considering connect request: reassociate: 0 selected: 0a:ec:da:fd:81:02 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x23124c0 current_ssid=(nil)
wlan0: Request association with 0a:ec:da:fd:81:02
wlan0: Re-association to the same ESS
TDLS: TDLS is allowed in the target BSS
TDLS: TDLS channel switch allowed in the target BSS
wlan0: No ongoing scan/p2p-scan found to abort
wlan0: Add radio work 'sme-connect'@0x237a668
wlan0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlan0: Starting radio work 'sme-connect'@0x237a668 after 0.000091 second wait
wlan0: WPA: clearing own WPA/RSN IE
wlan0: RSN: clearing own RSNXE
wlan0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
RSN: Search for BSSID 0a:ec:da:fd:81:02
RSN: No PMKSA cache entry found
wlan0: RSN: using IEEE 802.11i/D9.0
wlan0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 1 proto 2
wlan0: WPA: Selected mgmt group cipher 32
wlan0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
wlan0: WPA: clearing AP RSNXE
wlan0: WPA: AP group 0x10 network profile group 0x18; available group 0x10
wlan0: WPA: using GTK CCMP
wlan0: WPA: AP pairwise 0x10 network profile pairwise 0x18; available pairwise 0x10
wlan0: WPA: using PTK CCMP
wlan0: WPA: AP key_mgmt 0x1 network profile key_mgmt 0x1; available key_mgmt 0x1
wlan0: WPA: using KEY_MGMT 802.1X
wlan0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
wlan0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 0c 00
RSN: Set own RSNXE default - hexdump(len=0):
WPA: No current PMKSA - clear PMK
RRM: Determining whether RRM can be used - device support: 0x0
RRM: Insufficient RRM support in driver - do not use RRM
Added supported operating classes IE - hexdump(len=7): 3b 05 51 51 52 53 54
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlan0: Cancelling scan request
wlan0: SME: Trying to authenticate with 0a:ec:da:fd:81:02 (SSID='test8021x' freq=2462 MHz)
EAPOL: External notification - portValid=0
wlan0: State: SCANNING -> AUTHENTICATING
wlan0: Determining shared radio frequencies (max len 1)
wlan0: Shared frequencies (len=0): completed iteration
nl80211: Authenticate (ifindex=6)
* bssid=0a:ec:da:fd:81:02
* freq=2462
* SSID=test8021x
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
nl80211: Event message available
nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlan0
nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlan0(98:cd:ac:4c:43:8c) A1=98:cd:ac:4c:43:8c A2=00:00:00:00:00:00 on link_id=-1
nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 98 cd ac 4c 43 8c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d2 00
nl80211: Deauthenticate event
wlan0: Event DEAUTH (11) received
wlan0: Deauthentication notification
wlan0: * reason 210 (UNKNOWN)
wlan0: * address 00:00:00:00:00:00
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
wlan0: CTRL-EVENT-DISCONNECTED bssid=0a:ec:da:fd:81:02 reason=210
wlan0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=4)
wlan0: Do not request new immediate scan
wlan0: Radio work 'sme-connect'@0x237a668 done in 2.273833 seconds
wlan0: radio_work_free('sme-connect'@0x237a668): num_active_works --> 0
wlan0: Added BSSID 0a:ec:da:fd:81:02 into ignore list, ignoring for 10 seconds
Continuous association failures - consider temporary network disabling
wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="test8021x" auth_failures=1 duration=10 reason=CONN_FAILED
wlan0: Consecutive connection failures: 4 --> request scan in 5000 ms
wlan0: Setting scan request: 5.000000 sec
TDLS: Remove peers on disassociation
wlan0: WPA: Clear old PMK and PTK
wlan0: Disconnect event - remove keys
nl80211: Data frame filter flags=0x0
wlan0: State: AUTHENTICATING -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=6 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wlan0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=13):
74 65 73 74 38 30 32 31 78 test8021x
wlan0: Starting AP scan for wildcard SSID
wlan0: Add radio work 'scan'@0x237a668
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'scan'@0x237a668 after 0.000054 second wait
wlan0: nl80211: scan request
nl80211: Scan SSID test8021x
nl80211: Scan SSID
nl80211: Scan co-located APs on 6 GHz
nl80211: Scan extra IEs - hexdump(len=15): 7f 0b 00 00 0a 02 00 00 40 00 00 00 20 72 00
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (47) received
wlan0: Own scan request started a scan in 0.000178 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan probed for SSID 'test8021x'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlan0: Event SCAN_RESULTS (3) received
wlan0: Scan completed in 1.694001 seconds
nl80211: Received scan results (1 BSSes)
wlan0: BSS: Start scan result update 5
BSS: last_scan_res_used=1/32
wlan0: New scan results available (own=1 ext=0)
wlan0: Radio work 'scan'@0x237a668 done in 1.741210 seconds
wlan0: radio_work_free('scan'@0x237a668): num_active_works --> 0
wlan0: Postpone network selection by 3 seconds since all networks are disabled
wlan0: Try to associate due to network getting re-enabled
wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="test8021x"
Mark BSSID 0a:ec:da:fd:81:02 ignored to allow a lower priority BSS, if any, to be tried next
wlan0: BSSID 0a:ec:da:fd:81:02 ignore list count incremented to 2, ignoring for 10 seconds
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-48 freq=2462
wlan0: skip - BSSID ignored (count=2 limit=0)
wlan0: No APs found - clear BSSID ignore list and try again
wlan0: Removed BSSID 0a:ec:da:fd:81:02 from ignore list (clear)
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-48 freq=2462
wlan0: selected based on RSN IE
IEEE 802.11 element parse ignored unknown element (id=7 elen=6)
IEEE 802.11 element parse ignored unknown element (id=11 elen=5)
wlan0: MLD: No Multi-Link element
wlan0: selected BSS 0a:ec:da:fd:81:02 ssid='test8021x'
wlan0: Considering connect request: reassociate: 0 selected: 0a:ec:da:fd:81:02 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x23124c0 current_ssid=(nil)
wlan0: Request association with 0a:ec:da:fd:81:02
wlan0: Re-association to the same ESS
TDLS: TDLS is allowed in the target BSS
TDLS: TDLS channel switch allowed in the target BSS
wlan0: No ongoing scan/p2p-scan found to abort
wlan0: Add radio work 'sme-connect'@0x237a668
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'sme-connect'@0x237a668 after 0.000049 second wait
wlan0: WPA: clearing own WPA/RSN IE
wlan0: RSN: clearing own RSNXE
wlan0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
RSN: Search for BSSID 0a:ec:da:fd:81:02
RSN: No PMKSA cache entry found
wlan0: RSN: using IEEE 802.11i/D9.0
wlan0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 1 proto 2
wlan0: WPA: Selected mgmt group cipher 32
wlan0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
wlan0: WPA: clearing AP RSNXE
wlan0: WPA: AP group 0x10 network profile group 0x18; available group 0x10
wlan0: WPA: using GTK CCMP
wlan0: WPA: AP pairwise 0x10 network profile pairwise 0x18; available pairwise 0x10
wlan0: WPA: using PTK CCMP
wlan0: WPA: AP key_mgmt 0x1 network profile key_mgmt 0x1; available key_mgmt 0x1
wlan0: WPA: using KEY_MGMT 802.1X
wlan0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
wlan0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 0c 00
RSN: Set own RSNXE default - hexdump(len=0):
WPA: No current PMKSA - clear PMK
RRM: Determining whether RRM can be used - device support: 0x0
RRM: Insufficient RRM support in driver - do not use RRM
Added supported operating classes IE - hexdump(len=7): 3b 05 51 51 52 53 54
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlan0: Cancelling scan request
wlan0: SME: Trying to authenticate with 0a:ec:da:fd:81:02 (SSID='test8021x' freq=2462 MHz)
EAPOL: External notification - portValid=0
wlan0: State: SCANNING -> AUTHENTICATING
wlan0: Determining shared radio frequencies (max len 1)
wlan0: Shared frequencies (len=0): completed iteration
nl80211: Authenticate (ifindex=6)
* bssid=0a:ec:da:fd:81:02
* freq=2462
* SSID=test8021x
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
nl80211: Event message available
nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlan0
nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlan0(98:cd:ac:4c:43:8c) A1=98:cd:ac:4c:43:8c A2=00:00:00:00:00:00 on link_id=-1
nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 98 cd ac 4c 43 8c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d2 00
nl80211: Deauthenticate event
wlan0: Event DEAUTH (11) received
wlan0: Deauthentication notification
wlan0: * reason 210 (UNKNOWN)
wlan0: * address 00:00:00:00:00:00
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
wlan0: CTRL-EVENT-DISCONNECTED bssid=0a:ec:da:fd:81:02 reason=210
wlan0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=4)
wlan0: Do not request new immediate scan
wlan0: Radio work 'sme-connect'@0x237a668 done in 1.939865 seconds
wlan0: radio_work_free('sme-connect'@0x237a668): num_active_works --> 0
wlan0: Added BSSID 0a:ec:da:fd:81:02 into ignore list, ignoring for 10 seconds
Continuous association failures - consider temporary network disabling
wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="test8021x" auth_failures=2 duration=30 reason=CONN_FAILED
wlan0: Consecutive connection failures: 5 --> request scan in 10000 ms
wlan0: Setting scan request: 10.000000 sec
TDLS: Remove peers on disassociation
wlan0: WPA: Clear old PMK and PTK
wlan0: Disconnect event - remove keys
nl80211: Data frame filter flags=0x0
wlan0: State: AUTHENTICATING -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=6 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wlan0: State: DISCONNECTED -> SCANNING
Scan SSID - hexdump_ascii(len=13):
74 65 73 74 38 30 32 31 78 test8021x
wlan0: Starting AP scan for wildcard SSID
wlan0: Add radio work 'scan'@0x2379ae0
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'scan'@0x2379ae0 after 0.000051 second wait
wlan0: nl80211: scan request
nl80211: Scan SSID test8021x
nl80211: Scan SSID
nl80211: Scan co-located APs on 6 GHz
nl80211: Scan extra IEs - hexdump(len=15): 7f 0b 00 00 0a 02 00 00 40 00 00 00 20 72 00
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (47) received
wlan0: Own scan request started a scan in 0.000174 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan probed for SSID 'test8021x'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlan0: Event SCAN_RESULTS (3) received
wlan0: Scan completed in 1.693023 seconds
nl80211: Received scan results (1 BSSes)
wlan0: BSS: Start scan result update 6
BSS: last_scan_res_used=1/32
wlan0: New scan results available (own=1 ext=0)
wlan0: Radio work 'scan'@0x2379ae0 done in 1.734487 seconds
wlan0: radio_work_free('scan'@0x2379ae0): num_active_works --> 0
wlan0: Postpone network selection by 19 seconds since all networks are disabled
wlan0: Try to associate due to network getting re-enabled
Fast associate: Old scan results
wlan0: Setting scan request: 0.000000 sec
Scan SSID - hexdump_ascii(len=13):
74 65 73 74 38 30 32 31 78 test8021x
wlan0: Starting AP scan for wildcard SSID
wlan0: Add radio work 'scan'@0x2379ae0
wlan0: First radio work item in the queue - schedule start immediately
wlan0: Starting radio work 'scan'@0x2379ae0 after 0.000044 second wait
wlan0: nl80211: scan request
nl80211: Scan SSID test8021x
nl80211: Scan SSID
nl80211: Scan co-located APs on 6 GHz
nl80211: Scan extra IEs - hexdump(len=15): 7f 0b 00 00 0a 02 00 00 40 00 00 00 20 72 00
Scan requested (ret=0) - scan timeout 30 seconds
nl80211: Event message available
nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlan0
wlan0: nl80211: Scan trigger
wlan0: Event SCAN_STARTED (47) received
wlan0: Own scan request started a scan in 0.000177 seconds
nl80211: Event message available
nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlan0
wlan0: nl80211: New scan results available
nl80211: Scan probed for SSID 'test8021x'
nl80211: Scan probed for SSID ''
nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472 2484
wlan0: Event SCAN_RESULTS (3) received
wlan0: Scan completed in 1.693360 seconds
nl80211: Received scan results (1 BSSes)
wlan0: BSS: Start scan result update 7
BSS: last_scan_res_used=1/32
wlan0: New scan results available (own=1 ext=0)
wlan0: Radio work 'scan'@0x2379ae0 done in 1.759031 seconds
wlan0: radio_work_free('scan'@0x2379ae0): num_active_works --> 0
wlan0: CTRL-EVENT-SSID-REENABLED id=0 ssid="test8021x"
Mark BSSID 0a:ec:da:fd:81:02 ignored to allow a lower priority BSS, if any, to be tried next
wlan0: BSSID 0a:ec:da:fd:81:02 ignore list count incremented to 2, ignoring for 10 seconds
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-48 freq=2462
wlan0: skip - BSSID ignored (count=2 limit=0)
wlan0: No APs found - clear BSSID ignore list and try again
wlan0: Removed BSSID 0a:ec:da:fd:81:02 from ignore list (clear)
wlan0: Selecting BSS from priority group 0
wlan0: 0: 0a:ec:da:fd:81:02 ssid='test8021x' wpa_ie_len=0 rsn_ie_len=20 caps=0x1031 level=-48 freq=2462
wlan0: selected based on RSN IE
IEEE 802.11 element parse ignored unknown element (id=7 elen=6)
IEEE 802.11 element parse ignored unknown element (id=11 elen=5)
wlan0: MLD: No Multi-Link element
wlan0: selected BSS 0a:ec:da:fd:81:02 ssid='test8021x'
wlan0: Considering connect request: reassociate: 0 selected: 0a:ec:da:fd:81:02 bssid: 00:00:00:00:00:00 pending: 00:00:00:00:00:00 wpa_state: SCANNING ssid=0x23124c0 current_ssid=(nil)
wlan0: Request association with 0a:ec:da:fd:81:02
wlan0: Re-association to the same ESS
TDLS: TDLS is allowed in the target BSS
TDLS: TDLS channel switch allowed in the target BSS
wlan0: No ongoing scan/p2p-scan found to abort
wlan0: Add radio work 'sme-connect'@0x2379ae0
wlan0: First radio work item in the queue - schedule start immediately
RSN: Ignored PMKID candidate without preauth flag
wlan0: Starting radio work 'sme-connect'@0x2379ae0 after 0.000090 second wait
wlan0: WPA: clearing own WPA/RSN IE
wlan0: RSN: clearing own RSNXE
wlan0: Automatic auth_alg selection: 0x1
RSN: PMKSA cache search - network_ctx=(nil) try_opportunistic=0 akmp=0x0
RSN: Search for BSSID 0a:ec:da:fd:81:02
RSN: No PMKSA cache entry found
wlan0: RSN: using IEEE 802.11i/D9.0
wlan0: WPA: Selected cipher suites: group 16 pairwise 16 key_mgmt 1 proto 2
wlan0: WPA: Selected mgmt group cipher 32
wlan0: WPA: clearing AP WPA IE
WPA: set AP RSN IE - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 00 00
wlan0: WPA: clearing AP RSNXE
wlan0: WPA: AP group 0x10 network profile group 0x18; available group 0x10
wlan0: WPA: using GTK CCMP
wlan0: WPA: AP pairwise 0x10 network profile pairwise 0x18; available pairwise 0x10
wlan0: WPA: using PTK CCMP
wlan0: WPA: AP key_mgmt 0x1 network profile key_mgmt 0x1; available key_mgmt 0x1
wlan0: WPA: using KEY_MGMT 802.1X
wlan0: WPA: AP mgmt_group_cipher 0x20 network profile mgmt_group_cipher 0x0; available mgmt_group_cipher 0x0
wlan0: WPA: not using MGMT group cipher
WPA: Set own WPA IE default - hexdump(len=22): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 00 0f ac 01 0c 00
RSN: Set own RSNXE default - hexdump(len=0):
WPA: No current PMKSA - clear PMK
RRM: Determining whether RRM can be used - device support: 0x0
RRM: Insufficient RRM support in driver - do not use RRM
Added supported operating classes IE - hexdump(len=7): 3b 05 51 51 52 53 54
EAPOL: External notification - EAP success=0
EAPOL: External notification - EAP fail=0
EAPOL: External notification - portControl=Auto
wlan0: Cancelling scan request
wlan0: SME: Trying to authenticate with 0a:ec:da:fd:81:02 (SSID='test8021x' freq=2462 MHz)
EAPOL: External notification - portValid=0
wlan0: State: SCANNING -> AUTHENTICATING
wlan0: Determining shared radio frequencies (max len 1)
wlan0: Shared frequencies (len=0): completed iteration
nl80211: Authenticate (ifindex=6)
* bssid=0a:ec:da:fd:81:02
* freq=2462
* SSID=test8021x
* IEs - hexdump(len=0): [NULL]
* Auth Type 0
nl80211: Authentication request send successfully
nl80211: Event message available
nl80211: Drv Event 39 (NL80211_CMD_DEAUTHENTICATE) received for wlan0
nl80211: MLME event 39 (NL80211_CMD_DEAUTHENTICATE) on wlan0(98:cd:ac:4c:43:8c) A1=98:cd:ac:4c:43:8c A2=00:00:00:00:00:00 on link_id=-1
nl80211: MLME event frame - hexdump(len=26): c0 00 00 00 98 cd ac 4c 43 8c 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d2 00
nl80211: Deauthenticate event
wlan0: Event DEAUTH (11) received
wlan0: Deauthentication notification
wlan0: * reason 210 (UNKNOWN)
wlan0: * address 00:00:00:00:00:00
Deauthentication frame IE(s) - hexdump(len=0): [NULL]
wlan0: CTRL-EVENT-DISCONNECTED bssid=0a:ec:da:fd:81:02 reason=210
wlan0: Auto connect enabled: try to reconnect (wps=0/0 wpa_state=4)
wlan0: Do not request new immediate scan
wlan0: Radio work 'sme-connect'@0x2379ae0 done in 2.273766 seconds
wlan0: radio_work_free('sme-connect'@0x2379ae0): num_active_works --> 0
wlan0: Added BSSID 0a:ec:da:fd:81:02 into ignore list, ignoring for 10 seconds
Continuous association failures - consider temporary network disabling
wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="test8021x" auth_failures=3 duration=50 reason=CONN_FAILED
wlan0: Consecutive connection failures: 6 --> request scan in 10000 ms
wlan0: Setting scan request: 10.000000 sec
TDLS: Remove peers on disassociation
wlan0: WPA: Clear old PMK and PTK
wlan0: Disconnect event - remove keys
nl80211: Data frame filter flags=0x0
wlan0: State: AUTHENTICATING -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=6 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
^Cwlan0: Removing interface wlan0
nl80211: Getting wowlan status
nl80211: wowlan is disabled
wlan0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 (DEAUTH_LEAVING) state=DISCONNECTED valid_links=0x0 ap_mld_addr=00:00:00:00:00:00
TDLS: Tear down peers
nl80211: Data frame filter flags=0x0
wlan0: State: DISCONNECTED -> DISCONNECTED
nl80211: Set wlan0 operstate 0->0 (DORMANT)
netlink: Operstate: ifindex=6 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
Esp32 Log:
I (2964924) FW_MAIN: Get Tx power command
I (2964964) FW_MAIN: Get Tx power command
I (2965004) FW_MAIN: Get Tx power command
I (2965044) FW_MAIN: Get Tx power command
I (2965424) FW_MAIN: Get Tx power command
I (2965584) FW_MAIN: Set IP Address
I (2965994) FW_MAIN: Scan request
I (2967690) FW_CMD: wifi scanning done
I (2967734) FW_MAIN: Auth request
I (2967857) FW_CMD: wifi scanning done
I (2967938) FW_CMD: Connecting to test8021x, channel: 11 [5]
I (2967938) FW_CMD: AUTH Commit
I (2969634) FW_CMD: STA disconnected [210]
I (2969635) FW_CMD: STA Disconnect event: 210
I (2969635) FW_CMD: cleanup_ap_bssid
I (2969674) FW_MAIN: Get Tx power command
I (2969784) FW_MAIN: Scan request
I (2971480) FW_CMD: wifi scanning done
I (2971854) FW_MAIN: Auth request
I (2971977) FW_CMD: wifi scanning done
I (2972058) FW_CMD: Connecting to test8021x, channel: 11 [5]
I (2972058) FW_CMD: AUTH Commit
I (2973754) FW_CMD: STA disconnected [210]
I (2973755) FW_CMD: STA Disconnect event: 210
I (2973755) FW_CMD: cleanup_ap_bssid
I (2973794) FW_MAIN: Get Tx power command
I (2974304) FW_MAIN: Scan request
I (2976000) FW_CMD: wifi scanning done
I (2976384) FW_MAIN: Auth request
I (2976508) FW_CMD: wifi scanning done
I (2976588) FW_CMD: Connecting to test8021x, channel: 11 [5]
I (2976588) FW_CMD: AUTH Commit
I (2978284) FW_CMD: STA disconnected [210]
I (2978285) FW_CMD: STA Disconnect event: 210
I (2978285) FW_CMD: cleanup_ap_bssid
I (2978324) FW_MAIN: Get Tx power command
I (2979334) FW_MAIN: Scan request
I (2981030) FW_CMD: wifi scanning done
I (2981404) FW_MAIN: Auth request
I (2981527) FW_CMD: wifi scanning done
I (2981608) FW_CMD: Connecting to test8021x, channel: 11 [5]
I (2981608) FW_CMD: AUTH Commit
I (2983304) FW_CMD: STA disconnected [210]
I (2983305) FW_CMD: STA Disconnect event: 210
I (2983305) FW_CMD: cleanup_ap_bssid
I (2983344) FW_MAIN: Get Tx power command
I (2988353) FW_MAIN: Scan request
I (2990049) FW_CMD: wifi scanning done
I (2993093) FW_MAIN: Auth request
I (2993216) FW_CMD: wifi scanning done
I (2993297) FW_CMD: Connecting to test8021x, channel: 11 [5]
I (2993297) FW_CMD: AUTH Commit
I (2994993) FW_CMD: STA disconnected [210]
I (2994994) FW_CMD: STA Disconnect event: 210
I (2994994) FW_CMD: cleanup_ap_bssid
I (2995033) FW_MAIN: Get Tx power command
I (3005033) FW_MAIN: Scan request
I (3006729) FW_CMD: wifi scanning done
I (3025793) FW_MAIN: Scan request
I (3027489) FW_CMD: wifi scanning done
I (3027863) FW_MAIN: Auth request
I (3027986) FW_CMD: wifi scanning done
I (3028067) FW_CMD: Connecting to test8021x, channel: 11 [5]
I (3028067) FW_CMD: AUTH Commit
I (3029763) FW_CMD: STA disconnected [210]
I (3029764) FW_CMD: STA Disconnect event: 210
I (3029764) FW_CMD: cleanup_ap_bssid
I (3029803) FW_MAIN: Get Tx power command
I (3036094) FW_MAIN: Get Tx power command
I (3036223) FW_MAIN: Get Tx power commandSteps to reproduce the behavior
- Enable wlan0 interface: ip link set wlan0 up
- Create a config file for wpa_supplicant es:
network={
ssid="test8021x"
scan_ssid=1
key_mgmt=WPA-EAP
proto=RSN
eap=PEAP
identity="user3"
password="password"
phase1="peaplabel=0"
phase2="auth=MSCHAPV2"
} - Run wpa_supplicant in the console: wpa_supplicant -D nl80211 -i wlan0 -c /tmp/wpa_supplicant.conf -dd
Project release version
ESP-Hosted-NG Release 1.0.4.0.0
System architecture
other (details in Additional context)
Operating system
Linux
Operating system version
Vanila Linux 6.12.21
Shell
Bash
Additional context
Embedded System running on Allwinner t113i CPU with esp32 connected via spi.