ping延时很高

[wanlon]

Checklist

• Checked the issue tracker for similar issues to ensure this is not a duplicate
• Read the documentation to confirm the issue is not addressed there and your configuration is set correctly
• Tested with the latest version to ensure the issue hasn't been fixed

How often does this bug occurs?

always

Expected behavior

你好，我的硬件环境是君正x1600，单核soc，模组作为ap角色使用时，ping延时过高，内核版本5.15：
64 bytes from 192.168.1.7: seq=1537 ttl=64 time=48.523 ms
64 bytes from 192.168.1.7: seq=1538 ttl=64 time=178.361 ms
^C
--- 192.168.1.7 ping statistics ---
1539 packets transmitted, 1445 packets received, 6% packet loss
round-trip min/avg/max = 10.504/135.605/751.614 ms

使用2.4G频段，clockspeed=10Mhz

Actual behavior (suspected bug)

你好，我的硬件环境是君正x1600，单核soc，模组作为ap角色使用时，ping延时过高，内核版本5.15：
64 bytes from 192.168.1.7: seq=1537 ttl=64 time=48.523 ms
64 bytes from 192.168.1.7: seq=1538 ttl=64 time=178.361 ms
^C
--- 192.168.1.7 ping statistics ---
1539 packets transmitted, 1445 packets received, 6% packet loss
round-trip min/avg/max = 10.504/135.605/751.614 ms

使用2.4G频段，clockspeed=10Mhz

Error logs or terminal output

Steps to reproduce the behavior

just ping

Project release version

v1.0.4

System architecture

MIPS 32-bit

Operating system

Linux

Operating system version

linux

Shell

Bash

Additional context

No response

[wanlon]

我的负载：
Mem: 45068K used, 5772K free, 376K shrd, 0K buff, 21836K cached
CPU: 0% usr 9% sys 0% nic 90% idle 0% io 0% irq 0% sirq
Load average: 2.05 2.05 2.02 1/53 317

[wanlon]

PING 192.168.1.7 (192.168.1.7): 56 data bytes
64 bytes from 192.168.1.7: seq=0 ttl=64 time=104.998 ms
64 bytes from 192.168.1.7: seq=1 ttl=64 time=114.818 ms
64 bytes from 192.168.1.7: seq=2 ttl=64 time=284.642 ms
64 bytes from 192.168.1.7: seq=3 ttl=64 time=174.471 ms
64 bytes from 192.168.1.7: seq=4 ttl=64 time=184.323 ms
64 bytes from 192.168.1.7: seq=5 ttl=64 time=154.145 ms
64 bytes from 192.168.1.7: seq=6 ttl=64 time=143.976 ms
64 bytes from 192.168.1.7: seq=7 ttl=64 time=153.785 ms
64 bytes from 192.168.1.7: seq=8 ttl=64 time=83.612 ms
64 bytes from 192.168.1.7: seq=9 ttl=64 time=133.428 ms
64 bytes from 192.168.1.7: seq=11 ttl=64 time=103.063 ms
64 bytes from 192.168.1.7: seq=12 ttl=64 time=72.903 ms
64 bytes from 192.168.1.7: seq=13 ttl=64 time=102.721 ms
64 bytes from 192.168.1.7: seq=14 ttl=64 time=232.543 ms
64 bytes from 192.168.1.7: seq=15 ttl=64 time=142.462 ms
64 bytes from 192.168.1.7: seq=16 ttl=64 time=72.258 ms
64 bytes from 192.168.1.7: seq=17 ttl=64 time=202.030 ms
64 bytes from 192.168.1.7: seq=18 ttl=64 time=211.850 ms
64 bytes from 192.168.1.7: seq=19 ttl=64 time=101.688 ms
64 bytes from 192.168.1.7: seq=20 ttl=64 time=11.526 ms
64 bytes from 192.168.1.7: seq=21 ttl=64 time=41.336 ms
64 bytes from 192.168.1.7: seq=22 ttl=64 time=131.209 ms
64 bytes from 192.168.1.7: seq=23 ttl=64 time=80.994 ms
64 bytes from 192.168.1.7: seq=24 ttl=64 time=70.822 ms
64 bytes from 192.168.1.7: seq=26 ttl=64 time=40.474 ms
64 bytes from 192.168.1.7: seq=27 ttl=64 time=150.136 ms
64 bytes from 192.168.1.7: seq=28 ttl=64 time=39.976 ms
64 bytes from 192.168.1.7: seq=29 ttl=64 time=189.901 ms
64 bytes from 192.168.1.7: seq=30 ttl=64 time=199.630 ms
64 bytes from 192.168.1.7: seq=31 ttl=64 time=109.440 ms
64 bytes from 192.168.1.7: seq=32 ttl=64 time=179.282 ms
64 bytes from 192.168.1.7: seq=33 ttl=64 time=169.096 ms
^C
--- 192.168.1.7 ping statistics ---
35 packets transmitted, 32 packets received, 8% packet loss
round-trip min/avg/max = 11.526/130.860/284.642 ms

[wanlon]

我使用最新版本也试过，延时还是很高

[mantriyogesh]

@kapilkedawat ++

[kapilkedawat]

@Shreyas0-7 could you check locally this once?

[Shreyas0-7]

Hey @wanlon can you please help us with which esp chip you are using and type of transport used between host and slave

[wanlon]

HI, I solve this by using highest version, so this problem can be closed