ESP32-C3-MINI-1U not included in Espressif.kicad_sym

[DarranShepherd]

Checklist

• Checked the issue tracker for similar issues to ensure this is not a duplicate
• Read the documentation to confirm the issue is not addressed there and your configuration is set correctly
• Tested with the latest version to ensure the issue hasn't been fixed

How often does this bug occurs?

always

Expected behavior

I expected to be able to select ESP32-C3-MINI-1U when placing a symbol on a schematic.

Actual behavior (suspected bug)

The ESP32-C3-MINI-1 module is available, but the ESP32-C3-MINI-1U is not.

Error logs or terminal output

Steps to reproduce the behavior

Install the library in Kicad 8.0.9
Click Place Symbol on the schematic editor
Search for ESP32-C3-MINI
ESP32-C3-MINI-1 is available, but ESP32-C3-MINI-1U is not

Project release version

3.0.2

System architecture

Intel/AMD 64-bit (modern PC, older Mac)

Operating system

Windows

Operating system version

Windows 11

Shell

PowerShell

Additional context

I can see the footprint and 3d model files, but noticed that the ESP32-C3-MINI-1U is not included in the symbols file. I manually edited the file to copy the ESP32-C3-MINI-1 symbol and replaced ESP32-C3-MINI-1 with ESP32-C3-MINI-1U where necessary and this does now show up when choosing a symbol, but the pads are inset from the edge of the package and I'm very much out of my depth at this point...

Apologies if this is a beginner user mistake.

[DarranShepherd]

I can now see that the inset pads on one edge matches the datasheet, so perhaps my manual edit of the Espressif.kicad_sym file is sufficient?

[kozmotronik]

+1. I need to use the ESP32-C3-MINI-1U in a PCB. The only module missing in the symbols library. Although the pins are identical for both, using the ESP32-C3-MINI-1 in the schematic and the ESP32-C3-MINI-1U in the PCB may lead to confusions. So please consider adding the symbol as well.

Kind regards

[sylvanoMTL]

Release 3.1.0 and still no update :(