Merge pull request hathach#2392 from Krasutski/bugfix/ch32-hs-dcd

bugfix(ch32-hs-dcd): fix ch32 DATAx managment and long packet transmit

Author: hathach

hw/bsp/ch32v307/debug_uart.c

@@ -28,7 +28,7 @@
 #include <ch32v30x.h>
 
 
-#define UART_RINGBUFFER_SIZE_TX 64
+#define UART_RINGBUFFER_SIZE_TX 128
 #define UART_RINGBUFFER_MASK_TX (UART_RINGBUFFER_SIZE_TX-1)
 
 static char tx_buf[UART_RINGBUFFER_SIZE_TX];

hw/bsp/ch32v307/family.c

@@ -72,7 +72,7 @@ void board_init(void) {
   SysTick_Config(SystemCoreClock / 1000);
 #endif
 
-  usart_printf_init(115200);
+  usart_printf_init(CFG_BOARD_UART_BAUDRATE);
 
 #if CFG_TUD_MAX_SPEED == OPT_MODE_HIGH_SPEED
   // Use Highspeed USB
@@ -150,10 +150,11 @@ int board_uart_read(uint8_t* buf, int len) {
 
 int board_uart_write(void const* buf, int len) {
   int txsize = len;
+  const char* bufc = (const char*) buf;
   while (txsize--) {
-    uart_write(*(uint8_t const*) buf);
-    buf++;
+    uart_write(*bufc++);
   }
+  uart_sync();
   return len;
 }
 

src/portable/wch/ch32_usbhs_reg.h

@@ -63,8 +63,13 @@
 
 // USB DEV AD
 #define USBHS_DEV_AD_OFFSET 0x03
+
 // USB FRAME_NO
 #define USBHS_FRAME_NO_OFFSET 0x04
+#define USBHS_FRAME_NO_NUM_MASK (0x7FF)
+#define USBHS_FRAME_NO_MICROFRAME_SHIFT (11)
+#define USBHS_FRAME_NO_MICROFRAME_MASK  (0x7 << USBHS_FRAME_NO_MICROFRAME_SHIFT)
+
 // USB SUSPEND
 #define USBHS_SUSPEND_OFFSET    0x06
 #define USBHS_DEV_REMOTE_WAKEUP (1 << 2)
@@ -74,7 +79,10 @@
 
 // USB SPEED TYPE
 #define USBHS_SPEED_TYPE_OFFSET 0x08
-#define USBSPEED_MASK           (0x03)
+#define USBHS_SPEED_TYPE_MASK    0x03
+#define USBHS_SPEED_TYPE_FULL    0
+#define USBHS_SPEED_TYPE_HIGH    1
+#define USBHS_SPEED_TYPE_LOW     2
 
 // USB_MIS_ST
 #define USBHS_MIS_ST_OFFSET 0x09
@@ -99,12 +107,16 @@
 #define USBHS_ISO_ACT_FLAG    (1 << 6)
 
 // INT_ST
-#define USBHS_INT_ST_OFFSET  0x0B
-#define USBHS_DEV_UIS_IS_NAK (1 << 7)
-#define USBHS_DEV_UIS_TOG_OK (1 << 6)
-#define MASK_UIS_TOKEN       (3 << 4)
-#define MASK_UIS_ENDP        (0x0F)
-#define MASK_UIS_H_RES       (0x0F)
+#define USBHS_INT_ST_OFFSET   0x0B
+#define USBHS_DEV_UIS_IS_NAK  (1 << 7)
+#define USBHS_DEV_UIS_TOG_OK  (1 << 6)
+#define MASK_UIS_TOKEN        (3 << 4)
+#define USBHS_TOKEN_PID_OUT   (0 << 4)
+#define USBHS_TOKEN_PID_SOF   (1 << 4)
+#define USBHS_TOKEN_PID_IN    (2 << 4)
+#define USBHS_TOKEN_PID_SETUP (3 << 4)
+#define MASK_UIS_ENDP         (0x0F)
+#define MASK_UIS_H_RES        (0x0F)
 
 #define USBHS_TOGGLE_OK (0x40)
 #define USBHS_HOST_RES  (0x0f)
@@ -367,10 +379,5 @@
 #define USBHS_UH_T_TOG_AUTO (1 << 5)
 #define USBHS_UH_T_DATA_NO  (1 << 6)
 
-// 00: OUT, 01:SOF, 10:IN, 11:SETUP
-#define PID_OUT   0
-#define PID_SOF   1
-#define PID_IN    2
-#define PID_SETUP 3
 
 #endif